tectake 401488 Aluminium Kafébord Brukermanual

Introduksjon

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your tectake 401488 Aluminium Cafe Table. Please read this manual carefully before assembly and use to ensure safe and efficient operation. Keep this manual for future reference.

Sikkerhetsinstruksjoner

Always follow basic safety precautions when assembling and using the table to reduce the risk of injury or damage.

• Sørg for at alle deler er tilstede og uskadet før montering.
• Monter bordet på en myk, ren overflate for å unngå riper.
• Ikke overskrid maksimal lastekapasitet på 60 kg.
• Plasser bordet på en stabil, jevn overflate for å forhindre at det velter.
• Hold barn og kjæledyr unna under montering.
• Kontroller regelmessig at alle skruer og tilkoblinger er godt festet.
• Ikke stå eller sitte på bordet.

Pakkeinnhold

Kontroller at alle komponentene som er oppført nedenfor er inkludert i pakken din:

• 1 x Tabletop (MDF with brushed stainless steel coating)
• 1 x Main Pole (Aluminium)
• 1 x Base (Aluminium with plastic feet)
• Monteringsutstyr (skruer, skiver osv.)
• 1 x monteringsanvisning (denne håndboken)

Oppsett og montering

Follow these steps for proper assembly of your tectake Aluminium Cafe Table. It can be assembled to two different heights: 70 cm (dining table height) or 110 cm (standing table height).

Trinn 1: Klargjør basen

Unpack all components and lay them out on a clean, soft surface to prevent scratching. Attach the main pole to the base using the provided screws. Ensure the plastic feet are securely attached to the base for stability and floor protection.

Figure 1: Illustration of the table's stable base and adjustable feet. The base is made of aluminum, ensuring stability even under higher loads. The non-slip plastic feet are designed for height adjustment and stability on various surfaces.

Trinn 2: Fest bordplaten

Carefully place the tabletop onto the main pole. Secure it using the appropriate hardware. Ensure the tabletop is centered and firmly attached to prevent wobbling.

Figure 2: The tabletop, made of MDF with a polished stainless steel surface, is being attached to the main pole. This surface enhances resistance and provides a gleaming, weather-resistant finish.

Step 3: Adjust Height (if applicable for your model)

This model (401488-SE) is not foldable and has a fixed tube diameter of 5.8 cm. However, it is designed to be assembled at two different heights: 70 cm (for dining) or 110 cm (for standing). The assembly process will determine the final height. Refer to the specific assembly instructions provided in the package for details on how to achieve your desired height during initial setup.

Figure 3: The tectake cafe table can be configured for two heights: 70 cm (left, suitable for dining) and 110 cm (right, suitable for standing). This versatility allows it to function as both a dining table and a bar table.

Figure 4: Detailed dimensions of the table. The tabletop has a diameter of approximately 60 cm and a thickness of 2 cm. The table can be assembled to a height of 70 cm or 110 cm, with a tube diameter of approximately 5.8 cm. The maximum load capacity is 60 kg.

Bruksanvisning

Your tectake Aluminium Cafe Table is designed for versatile use in various settings, including gardens, patios, balconies, or indoor spaces like cafes and offices.

• Plassering: Ensure the table is placed on a flat, stable surface. The plastic feet help in leveling on uneven ground.
• Lastekapasitet: Do not exceed the maximum load capacity of 60 kg. Distribute weight evenly on the tabletop.
• Værbestandighet: The table features a weatherproof tabletop and stainless steel coating, making it suitable for outdoor use. However, for prolonged life, it is recommended to store it indoors during extreme weather conditions.

Figure 5: The table is shown outdoors with water droplets, highlighting its weather-resistant properties. It is perfect for outdoor use and is resistant to rain, with a robust construction that can support up to 60 kg.

Figure 6: The table in a cafe setting, demonstrating its versatility as a dining or bar table. Its adaptable design makes it suitable for various situations and environments, thanks to its two-step height adjustment and compact size.

Vedlikehold og stell

Proper maintenance will extend the life and preserve the appearance of your table.

• Rengjøring: Tørk av bordplaten og rammen med en myk klutamp cloth. For stubborn stains, use a mild soap solution. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Overflate i rustfritt stål: The tabletop is coated with brushed stainless steel, which is easy to clean and resistant to rust.
• Regelmessige kontroller: Kontroller regelmessig alle skruer og tilkoblinger for å sikre at de sitter godt fast. Stram til om nødvendig.
• Lagring: While weather-resistant, storing the table indoors or covering it during prolonged periods of non-use or harsh weather will help maintain its condition.

Figure 7: A hand cleaning the stainless steel tabletop with a cloth, demonstrating its ease of cleaning. The stainless steel surface is designed for simple maintenance.

Feilsøking

Spesifikasjoner

• Modell: 401488-SE
• Bordplatediameter: 60 cm
• Bordplatens tykkelse: 2 cm
• Rørdiameter: 5.8 cm
• Justerbar høyde: 70 cm / 110 cm (fixed height upon assembly)
• Vekt: Omtrent 7.6 kg
• Maksimal lastekapasitet: 60 kg
• Materialer: MDF (tabletop), Stainless Steel (tabletop coating), Aluminium (pole and base), Plastic (feet)
• Farge: Silver / All Grey

Garanti og støtte

For garantiinformasjon eller teknisk støtte, vennligst kontakt tectakes kundeservice. Ta vare på kjøpskvitteringen som kjøpsbevis.

Kontaktinformasjon: Please refer to the tectake official website or the packaging for the most current contact details.

Nettressurser: For additional information and FAQs, visit the official tectake webnettsted: www.tectake.se