1. Introduksjon
Thank you for choosing the FLYLINKTECH CF800 Portable Car Jump Starter. This device is designed to provide a reliable solution for jump-starting 12V vehicles, serving as a powerful portable power bank, and offering a multi-functional LED light. Please read this manual thoroughly before use to ensure safe and optimal operation.
Pakkeinnhold:
- FLYLINKTECH CF800 Portable Car Jump Starter
- Smart Jumper Clamps
- Mikro USB-kabel
- Brukerhåndbok
- EVA Hard Case
2. Sikkerhetsinformasjon
Always observe the following safety precautions when using the jump starter to prevent electric shock, explosion, fire, or injury.
- Les instruksjoner: Always read and understand all instructions before operating the device.
- Øyebeskyttelse: Wear safety glasses and protective clothing when working with batteries.
- Ventilasjon: Ensure the area is well-ventilated during jump-starting.
- No Smoking/Sparks: Ikke røyk, og tillat ikke gnister eller flammer i nærheten av batteriet eller motoren.
- Hold tørr: Do not expose the jump starter to rain or wet conditions.
- Barn: Oppbevar enheten utilgjengelig for barn.
- Riktig polaritet: Koble til jumperen clamps to the correct battery terminals (red to positive, black to negative). Reverse polarity can cause damage.
- Unngå kortslutning: Ikke la den røde og svarte clamps å ta på hverandre.
- Temperatur: Do not operate the device in extremely high or low temperatures outside the specified range.
- Skadet enhet: Do not use the jump starter if it is damaged, cracked, or leaking.

Image: Visual representation of the CF800's integrated safety protections, including short-circuit, reverse charge, reverse polarity, over-discharge, over-current, over-voltage, and high-temperature protection.
3. Produktet er overview
The FLYLINKTECH CF800 is a compact and powerful device designed for emergency vehicle starting and portable power needs.
Hovedenhetens funksjoner:
- Strømknapp: Activates the device and LED light.
- Batteriindikatorlamper: Show the remaining battery charge level.
- Starthjelpport: Connects to the smart jumper clamps.
- USB-utgangsporter (x2): For lading av elektroniske enheter.
- Type-C inngangsport: For recharging the jump starter unit.
- LED lommelykt: Multi-mode light for illumination, strobe, and SOS.
Smart Jumper Clamps:
The included smart jumper clamps feature built-in protection mechanisms and a digital display for enhanced safety and ease of use.
- Omvendt polaritetsbeskyttelse: Forhindrer skade hvis detamps er koblet feil.
- Overstrømsbeskyttelse: Beskytter mot for høy strømflyt.
- Over-voltage Beskyttelse: Beskytter mot volumtage overspenninger.
- Kortslutningsbeskyttelse: Forhindrer skade fra utilsiktet kortslutning.
- Digital skjerm: Provides real-time feedback on battery voltage and protection status.

Image: The complete FLYLINKTECH CF800 kit, showcasing the jump starter unit, smart jumper clamps, USB charging cable, and the protective EVA hard case.
4. Lading av starthjelpen
Before first use, fully charge the FLYLINKTECH CF800. It is recommended to recharge the unit at least once every three months to maintain battery health, even when not in use.
Ladeprosedyre:
- Connect the provided Micro USB cable to the Type-C input port on the jump starter.
- Connect the other end of the USB cable to a 5V/2A or 9V/2A USB wall adapter (not included).
- The battery indicator lights will illuminate and flash during charging. All lights will be solid when fully charged.
A full charge typically takes several hours. Disconnect the charger once the unit is fully charged.

Image: The FLYLINKTECH CF800 unit connected to a power source for charging via its Type-C input, while simultaneously demonstrating its capability to charge external devices like a smartphone and tablet using its USB output ports.
5. Setup for Jump Starting
Before attempting to jump start a vehicle, ensure the jump starter is adequately charged (at least 75% recommended).
- Turn off the vehicle's ignition and all accessories (lights, radio, air conditioning).
- Engage the parking brake and place the vehicle in park (automatic) or neutral (manual).
- Ensure the vehicle's battery terminals are clean and free of corrosion.
6. Bruksanvisning (starthjelp)
The FLYLINKTECH CF800 is designed to jump start 12V vehicles with up to 10.0L gasoline engines or 9.0L diesel engines.

Image: The FLYLINKTECH CF800 jump starter unit positioned in a car's engine bay, with its smart clamps correctly connected to a vehicle battery, ready for jump-starting.
Trinn-for-trinn guide:
- Koble til Clamps til starthjelp: Insert the blue plug of the smart jumper clamps firmly into the jump start port on the CF800 unit. Ensure a secure connection.
- Koble til Clamps til bilbatteri:
- Fest RØD (+) clamp til kjøretøyets positive batteripol.
- Fest SVART (-) clamp to the vehicle's negative battery terminal.
Den smarte clamps' digital display will show the battery voltage and indicate if the connection is correct. If an error is displayed, check the connections.

Image: Close-up of the smart jumper clamps featuring a digital display that provides real-time feedback on battery status and active safety protections, such as low voltage, reverse polarity, reverse charge, short circuit, over-temperature, and over-voltage.
- Start kjøretøy: Når clamps are correctly connected and the smart display shows a ready status, start the vehicle's engine.
- Fjern Clamps: As soon as the engine starts, immediately remove the smart jumper clamps from the car battery, first the black (-) clamp, deretter den røde (+) kl.amp. Then, disconnect the clamps fra starthjelpsenheten.
If the vehicle does not start after the first attempt, wait at least 30 seconds before trying again. Do not attempt more than three consecutive jump starts.
7. Powerbankens funksjonalitet
The FLYLINKTECH CF800 features a 20000mAh capacity and two USB output ports to charge your electronic devices.
- USB1-utgang: 5V/3A, 9V/2A (Quick Charge 3.0 compatible)
- USB2-utgang: 5V/2.4A
To Charge Devices:
- Connect your device's USB charging cable to one of the USB output ports on the CF800.
- The CF800 will automatically begin charging your device.
- Monitor the battery indicator lights on the CF800 to check its remaining charge.
8. LED-lysfunksjoner
The built-in LED flashlight offers multiple modes for various situations.

Image: The FLYLINKTECH CF800 jump starter held in hand, demonstrating its powerful LED flashlight in action, with icons illustrating its various modes: standard illumination, SOS signal, warning light, and strobe.
Betjening av LED-lyset:
- Slå på/av: Press and hold the power button for 3 seconds to turn the LED light on or off.
- Endre moduser: Once the light is on, short press the power button to cycle through the modes: Steady On (Torch) → Strobe → SOS → Off.
9. Vedlikehold og lagring
Proper maintenance ensures the longevity and readiness of your FLYLINKTECH CF800.
- Lad opp regelmessig: Recharge the jump starter at least once every 3 months to prevent deep discharge and prolong battery life.
- Rengjøring: Tørk av enheten med en tørr, myk klut. Ikke bruk sterke kjemikalier eller slipende rengjøringsmidler.
- Lagring: Store the device in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
- Temperaturmotstand: The CF800 is designed to operate and be stored within a wide temperature range, typically from -20°C to 50°C.

Image: The FLYLINKTECH CF800 jump starter demonstrating its robust design and ability to withstand extreme temperatures, depicted in both a hot environment at 50°C and a cold environment at -20°C.
10. Feilsøking
If you encounter issues with your FLYLINKTECH CF800, refer to the following common problems and solutions.
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Kjøretøyet starter ikke | Jump starter battery low; Incorrect clamp connection; Vehicle battery severely discharged; Engine issues. | Sørg for at starthjelpen er fulladet. Sjekk spenningenamp connections for correct polarity. Wait 30 seconds before reattempting. If still no start, vehicle may have other issues. |
| Smart klamps show error | Omvendt polaritet; Kortslutning; Overvolumtage; Low voltage. | Refer to the smart clamp display for the specific error code. Disconnect and reconnect clamps correctly. Ensure battery voltage is within acceptable range. |
| Jumpstarteren lader ikke | Charging cable faulty; Wall adapter insufficient; Charging port damaged. | Try a different USB cable and wall adapter. Ensure the adapter meets the specified output (5V/2A or 9V/2A). |
| USB-utgang lader ikke enheter | Jump starter battery low; Device cable faulty; Device not compatible. | Ensure jump starter has sufficient charge. Try a different USB cable or device. |
If the problem persists after trying these solutions, please contact FLYLINKTECH customer support.
11. Spesifikasjoner
| Trekk | Spesifikasjon |
|---|---|
| Modell | CF800 |
| Toppstrøm | 3000A |
| Batterikapasitet | 20000mAh |
| Start Voltage | 12V |
| Gas Engine Compatibility | Opptil 10.0L |
| Diesel Engine Compatibility | Opptil 9.0L |
| USB1-utgang | 5V/3A, 9V/2A (hurtiglading 3.0) |
| USB2-utgang | 5V/2.4A |
| Type-C-inngang | 5V/2A, 9V/2A, 5V/3A |
| Dimensjoner (L x B x H) | 17.8 x 8.8 x 3.8 cm |
| Vekt | 700 g |
| Driftstemperatur | -20°C til 50°C |
12. Garanti og støtte
FLYLINKTECH provides a worry-free 12 måneders garanti for the CF800 Portable Car Jump Starter, along with efficient livstids ettersalgsservice.
If you have any questions, encounter problems during use, or require technical assistance, please contact FLYLINKTECH customer support. Our professional technical team is available to help resolve issues within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webnettstedet.