Progress Lighting P810032-028-30

Progress Lighting Everlume 24-Inch LED Linear Panel Light Instruction Manual

Model: P810032-028-30

1. Introduksjon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Everlume 24-Inch LED Linear Panel Light. Please read this manual thoroughly before installation and keep it for future reference.

2. Viktig sikkerhetsinformasjon

Always follow basic safety precautions when installing, operating, or maintaining this product to reduce the risk of fire, electric shock, or injury to persons.

  • ADVARSEL: Fare for elektrisk støt. Koble fra strømmen før installasjon eller service.
  • Ensure all electrical connections are in accordance with local codes, ordinances, and the National Electric Code (NEC).
  • Rådfør deg med en kvalifisert elektriker hvis du er usikker på installasjonsprosessen.
  • Do not install near heat sources or in excessively damp steder.
  • Dette produktet er kun beregnet for innendørs bruk.
  • ADVARSEL: Dette produktet kan utsette deg for kjemikalier, inkludert bly, som er kjent for staten California for å forårsake kreft og fødselsskader eller andre reproduktive skader. For mer informasjon gå til www.P65Warnings.ca.gov.

3. Pakkens innhold

Kontroller at alle komponenter er til stede og uskadet før installasjonen starter.

Diagram showing package contents including fixture, base plate, wire nuts, plastic anchors, and wall mounting screws.

Figur 3.1: Package Contents and Hardware. This image displays a diagram of the fixture and base plate, along with illustrations of the included hardware: wire nuts, plastic anchors, and wall mounting screws, indicating quantities for each.

Table 3.1: Package Contents List
DelBeskrivelseMengde
AArmatur1
BBase (Back Plate)1

Hardware Contents (Refer to Figure 3.1 for visual reference)

  • Wire Nuts: Used for securing electrical connections. (Quantity: 3)
  • Plastic Anchors: For securing the fixture to drywall if a stud is not available. (Quantity: 4)
  • Wall Mounting Screws: Used with plastic anchors or directly into studs for mounting. (Quantity: 4)

Note: The hardware images in Figure 3.1 are illustrative and not to scale.

4. Produktspesifikasjoner

AttributtDetalj
ModellnummerP810032-028-30
MerkeFremdriftsbelysning
Dimensjoner (L x B x H)23.75 cm x 11.93 cm x 1.25 cm
LyskildeIntegrert LED
Wattage21W (Integrated LED)
Fargetemperatur3000K
CRI90
Lumen utgang1587 delivered lumens
Voltage120 volt
DimbarJa
MaterialeAluminum, Glass (Shade)
FullførSatin Hvit
InstallasjonstypeFlush Mount
Innendørs/utendørs brukInnendørs
Diagram showing the dimensions of the linear panel light: 23.75 inches in length and 1.242 inches in height.

Figur 4.1: Product Dimensions. This image illustrates the length (23.75 inches) and height (1.242 inches) of the linear panel light.

5. Oppsett og installasjon

Before you begin, ensure the power is turned off at the circuit breaker. It is recommended to have two people for installation.

Nødvendig verktøy (ikke inkludert):

  • Stjerneskrutrekker
  • Wire strippere
  • Elektrisk tape
  • Vernebriller
  • Stige

Installasjonstrinn:

  1. Slå av strømmen: Finn sikringen som styrer plasseringen av lysarmaturen og slå den AV. Kontroller at strømmen er av med en volumbryter.tage tester.
  2. Klargjør monteringsoverflaten: Hvis du bytter ut en eksisterende armatur, fjern den forsiktig. Sørg for at koblingsboksen er forsvarlig montert og kan bære armaturens vekt.
  3. Fest monteringsplate: Secure the fixture's base (Part B) to the junction box using the provided screws. Ensure it is flush and stable.
  4. Lag elektriske tilkoblinger:
    • Koble til svart ledningen fra armaturen til svart (varm) ledning fra koblingsboksen ved hjelp av en trådmutter.
    • Koble til hvit ledningen fra armaturen til hvit (nøytral) ledningen fra koblingsboksen ved hjelp av en trådmutter.
    • Koble til bakke ledningen fra armaturen til bakke wire from the junction box (or to the bare copper wire from the junction box) using a wire nut.
    • Stikk alle ledninger forsiktig inn i koblingsboksen.
  5. Sikker armatur: Align the fixture (Part A) with the base plate (Part B) and secure it using the provided screws. Ensure the fixture is flush against the ceiling/wall and no gaps are visible.
  6. Gjenopprett kraften: Turn the power back ON at the circuit breaker. Test the light fixture to ensure it functions correctly.
Progress Lighting 24-Inch Satin Modern LED Linear Panel Light installed on a ceiling.

Figur 5.1: Installed Linear Panel Light. This image shows the sleek, low-profile appearance of the light fixture once installed.

6. Bruksanvisning

The Everlume Collection LED Linear Panel Light is designed for simple operation.

Slå på/av:

Operate the light fixture using a standard wall switch connected to the circuit. Flip the switch to the 'ON' position to illuminate the light and to the 'OFF' position to turn it off.

Dimming funksjonalitet:

This fixture is dimmable. To utilize the dimming feature, ensure you have installed a compatible LED dimmer switch (sold separately) in place of a standard wall switch. Follow the dimmer switch manufacturer's instructions for operation.

Note: Not all dimmer switches are compatible with LED fixtures. Refer to the dimmer switch manufacturer's specifications for compatibility.

7. Vedlikehold

Regelmessig vedlikehold vil bidra til å bevare utseendet og funksjonaliteten til lampen din.

  • Rengjøring: Før rengjøring, sørg for at strømmen til armaturen er slått av. Bruk en myk, tørr eller lett fuktet klut.amp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
  • LED-lyskilde: The LED light source is integrated and not user-replaceable. If the LED fails, the entire fixture may need to be replaced. Refer to the warranty information for details.
  • Undersøkelse: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician or contact customer support.

8. Feilsøking

Hvis du opplever problemer med lysarmaturen din, kan du se følgende vanlige problemer og løsninger:

ProblemMulig årsakLøsning
Lyset tennes ikke.
  • Ingen strøm til armaturet.
  • Løse ledningsforbindelser.
  • Defekt veggbryter.
  • Sjekk sikringsbryteren og sørg for at den er PÅ.
  • Verify all wire connections are secure (ensure power is OFF first).
  • Test veggbryteren eller skift den ut om nødvendig.
Lyset flimrer eller dimmes ujevnt.
  • Inkompatibel dimmerbryter.
  • Løse ledningsforbindelser.
  • Ensure dimmer switch is compatible with LED fixtures. Replace if necessary.
  • Check all wire connections (ensure power is OFF first).
Summende lyd fra armaturet.
  • Inkompatibel dimmerbryter.
  • Replace dimmer switch with a high-quality, LED-compatible dimmer.

Hvis problemet vedvarer etter at du har prøvd disse løsningene, kan du kontakte kundestøtte.

9. Garanti og kundestøtte

Garantiinformasjon:

This Progress Lighting product is covered by a 5 års begrenset garanti. This warranty guarantees your complete satisfaction with your purchase and covers defects in materials and workmanship under normal use. It does not cover damage due to improper installation, misuse, abuse, or acts of nature.

For full warranty terms and conditions, please refer to the official Progress Lighting webnettstedet eller kontakt kundestøtte.

Kundestøtte:

If you have any questions, require technical assistance, or need to report a missing part, please contact Progress Lighting Customer Service:

Please have your model number (P810032-028-30) and date of purchase ready when contacting support.

© 2024 Progress Lighting. Alle rettigheter forbeholdt.

For mer informasjon, besøk www.progresslighting.com