Bruksanvisning for Fortis Scala 842080C veggmontert baderomskran

Introduksjon

This manual provides detailed instructions for the installation, operation, and maintenance of your Fortis Scala 842080C Wall Mounted Widespread Bathroom Faucet. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and care will ensure optimal performance and longevity of your faucet.

Sikkerhetsinformasjon

• Always turn off the main water supply before beginning any installation or repair work.
• Bruk passende personlig verneutstyr, som vernebriller og hansker, under installasjon.
• Hvis du er usikker på noen del av installasjonsprosessen, bør du kontakte en kvalifisert rørlegger.
• Sørg for at alle tilkoblinger er sikre for å forhindre lekkasjer.
• This product is designed for use with potable water only.

Pakkeinnhold

Kontroller at alle komponenter er til stede før installasjonen starter:

• Faucet Spout Assembly
• Handle Assembly (Single Lever)
• Monteringsutstyr
• Bruksanvisning (dette dokumentet)

Image: Fortis Scala 842080C Wall Mounted Widespread Bathroom Faucet, showing the spout and single lever handle in a brushed black finish. This image illustrates the main components included in the package.

Spesifikasjoner

Oppsett og installasjon

Profesjonell installasjon anbefales.

Nødvendige verktøy og materialer (ikke inkludert):

• Justerbar skiftenøkkel
• Phillips skrutrekker
• Rørleggerens kitt eller silikonforsegling
• Gjengeteip (teflontape)
• Vernebriller
• Hansker

Trinn før installasjon:

1. Slå av vanntilførselen: Locate the main water shut-off valve and turn off the water supply to the bathroom. Open nearby faucets to drain any remaining water from the lines.
2. Tøm arbeidsområdet: Sørg for at installasjonsområdet er rent og fritt for hindringer.
3. Inspiser komponenter: Unpack all parts and inspect them for any damage. Contact customer support if any parts are missing or damaged.

Installasjonsprosedyre:

1. Prepare Wall Openings: Ensure the wall openings for the spout and handle are correctly spaced at 8 inches center-to-center.
2. Install Valve Body (Rough-in): Follow the rough-in instructions provided with the valve body (if separate) to install it within the wall. Ensure it is level and securely fastened.
3. Koble til vannledninger: Connect the hot and cold water supply lines to the appropriate inlets on the valve body. Use thread seal tape on all threaded connections and tighten securely with a wrench.
4. Install Spout Assembly: Insert the spout assembly into its designated wall opening. Apply a bead of silicone sealant around the base of the escutcheon plate before securing it to the wall. Connect the spout to the valve body outlet.
5. Install Handle Assembly: Insert the handle assembly into its designated wall opening. Secure the escutcheon plate to the wall, applying sealant as needed. Attach the handle lever to the valve stem according to the specific design.
6. Test for lekkasjer: Slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, turn off the water, tighten the connections, and re-test.
7. Spylingskran: Once installation is complete and no leaks are present, remove the aerator from the spout. Turn on the faucet to full hot and full cold for one minute each to flush out any debris from the water lines. Turn off the faucet, re-install the aerator.

Operasjon

The Fortis Scala 842080C faucet features a single lever handle for controlling both water flow and temperature.

• Slå på/av: Lift the handle to turn on the water. Push the handle down to turn off the water.
• Justering av vannstrømmen: Jo lenger du løfter håndtaket, desto større blir vannstrømmen.
• Justering av vanntemperatur: Move the handle to the left for hot water and to the right for cold water. The center position provides a mix of hot and cold water.

Vedlikehold

Rengjøring:

• Clean the faucet regularly with a soft cloth and mild soap and water.
• Unngå å bruke slipende rengjøringsmidler, sterke kjemikalier eller skuresvamper, da disse kan skade overflaten.
• Skyll grundig etter rengjøring og tørk med en myk klut for å unngå vannflekker.

Vedlikehold av luftelufter:

• Hvis vannstrømmen avtar eller blir uregelmessig, kan luftblanderen være tett.
• Skru av luftblanderen fra enden av tuten.
• Rinse the aerator under running water to remove any debris. Use a soft brush if necessary.
• Re-install the aerator, ensuring it is securely tightened.

Feilsøking

Garanti og støtte

The Fortis Scala 842080C Faucet is covered under Fortis's limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Fortis webnettstedet.

For technical assistance, replacement parts, or warranty claims, please contact Fortis Customer Support:

• Webnettsted: www.fortisfaucet.com
• Telefon: [Insert Fortis Customer Service Phone Number Here]
• E-post: [Insert Fortis Customer Service Email Here]

When contacting support, please have your model number (842080C) and date of purchase available.