Sirman Ektor 37

Bruksanvisning for SIRMAN Ektor 37 Professional Juicer

Model: Ektor 37

Introduksjon

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your SIRMAN Ektor 37 Professional Juicer. Please read this manual thoroughly before using the appliance and retain it for future reference.

Sikkerhetsinstruksjoner

Sørg alltid for at apparatet er koblet fra støpselet før montering, demontering eller rengjøring.
Ikke senk motorbasen i vann eller andre væsker.
Hold hender og redskaper unna bevegelige deler under drift.
Ensure all parts are correctly assembled before operating the juicer.
This appliance is for professional use.
Ikke bruk juiceren hvis strømledningen eller støpselet er skadet.

Produktkomponenter

The SIRMAN Ektor 37 Professional Juicer consists of several key components:

Motorbase: Inneholder en 400W motor.
Fôringsrenne: For introducing fruits and vegetables.
Pusher: To guide produce into the feeding chute.
Juice Bowl: Samler opp den ekstraherte saften.
Beholder for masse: Samler opp den kasserte massen.
Juicebeholder: For collecting the finished juice.
Auger/Squeezing Screw: Extracts juice from produce.
Filter/Strainer: Separerer juice fra fruktkjøtt.
Rengjøringsbørste: For vedlikehold.

eksploderte view of SIRMAN Ektor 37 juicer components — **Figur 1:** eksploderte view of the SIRMAN Ektor 37 juicer showing all detachable components including the motor base, feeding chute, juice bowl, pulp container, juice container, auger, filter, and cleaning brush. This image helps in identifying each part for assembly and cleaning.

Oppsett og montering

Pakke ut: Fjern forsiktig alle komponenter fra emballasjen.
Rengjøre: Wash all detachable parts (juice bowl, auger, filter, containers, pusher) with warm, soapy water. Rinse thoroughly and dry. The motor base should only be wiped with a damp klut.
Samle:
- Place the juice bowl onto the motor base, ensuring it is securely seated.
- Insert the filter into the juice bowl, aligning it properly.
- Place the auger into the center of the filter, twisting gently until it drops into place.
- Attach the feeding chute assembly onto the juice bowl, ensuring it locks into position.
- Position the pulp container under the pulp outlet and the juice container under the juice outlet.

Assembled SIRMAN Ektor 37 juicer with juice and pulp containers — **Figur 2:** The SIRMAN Ektor 37 juicer fully assembled, showing the main unit with the juice and pulp collection containers placed correctly for operation. This illustrates the final setup before juicing.

Bruksanvisning

Tilbered produkter: Wash fruits and vegetables thoroughly. Cut larger items into pieces that fit comfortably into the feeding chute. Remove hard pits, large seeds, and thick peels (e.g., citrus, pineapple).
Strøm på: Plug the juicer into a suitable power outlet. Press the power button to start the motor.
Fôrprodukter: Slowly feed the prepared produce into the feeding chute. Use the pusher to gently guide the produce down. Do not force produce into the chute, as this can damage the motor or auger.
Juicingprosess: The juicer will extract juice into the juice container and separate pulp into the pulp container.
Kontinuerlig drift: The juicer is designed for continuous professional use. However, if processing very hard ingredients, allow brief pauses to prevent overheating.
Slå av: Once juicing is complete, press the power button to turn off the appliance and unplug it from the power outlet.

Person feeding celery into the juicer — **Figur 3:** A hand gently pushing celery into the feeding chute of the SIRMAN Ektor 37 juicer. This demonstrates the correct method for introducing produce during operation.

SIRMAN Ektor 37 juicer in operation with juice and pulp containers — **Figur 4:** The SIRMAN Ektor 37 juicer actively extracting juice, with the juice flowing into the collection container. This image shows the appliance during its primary function.

Vedlikehold og rengjøring

Regular cleaning and maintenance ensure the longevity and optimal performance of your juicer.

Koble fra strømmen: Trekk alltid støpselet til juiceren ut av stikkontakten før rengjøring.
Demonter: Disassemble the juicer in reverse order of assembly.
Skylle: Skyll alle avtakbare deler under rennende vann umiddelbart etter bruk for å forhindre at fruktkjøttet tørker og setter seg fast.
Vaske: Wash the juice bowl, auger, filter, containers, and pusher with warm, soapy water. Use the provided cleaning brush to remove stubborn pulp from the filter mesh.
Rengjør motorbasen: Tørk av motorbasen med adamp klut. Senk den aldri i vann.
Tørk og oppbevar: Sørg for at alle delene er helt tørre før du monterer dem sammen igjen eller oppbevarer dem. Oppbevar juiceren på et rent og tørt sted.

Cleaning brush and juicer filters — **Figur 5:** The cleaning brush provided with the SIRMAN Ektor 37 juicer, alongside the two different filters. This highlights the tools and components essential for thorough cleaning.

Feilsøking

Problem	Mulig årsak	Løsning
Juiceren slår seg ikke på.	Ikke koblet til; strømbryteren er av; delene er ikke riktig montert.	Ensure plug is securely in outlet; turn power switch on; reassemble all parts correctly, ensuring they are locked.
Motoren stopper under drift.	Overload protection activated; too much produce fed too quickly.	Turn off and unplug. Remove excess produce. Wait 15-20 minutes for motor to cool before restarting. Feed produce slowly.
For mye fruktkjøtt i juicen.	Filter clogged; soft produce being juiced.	Clean the filter thoroughly. For very soft produce, some pulp is normal.
Høy lyd eller vibrasjon.	Parts not assembled correctly; foreign object in juicer.	Disassemble and reassemble carefully. Check for any foreign objects and remove them.

Spesifikasjoner

Trekk	Detalj
Merke	Sirman
Modell	Ektor 37
Makt	400 watt
Materiale	Stainless Steel (exterior structure), Plastic (internal components)
Dimensjoner (B x H x D)	150 mm x 450 mm x 240 mm (approximate)
Feeding Chute Dimensions	78 x 88 mm / 43 x 35 mm
Finish Type	Børstet
ASIN	B09299H2WM

Technical drawing with dimensions of the SIRMAN Ektor 37 juicer — **Figur 6:** Technical drawing illustrating the dimensions of the SIRMAN Ektor 37 juicer. This provides precise measurements for width, height, and depth, useful for placement and installation planning.

Garanti og støtte

For warranty information or technical support, please contact your local SIRMAN distributor or refer to the official SIRMAN webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis.

SIRMAN has been manufacturing quality equipment for professionals for over 50 years, ensuring reliability and performance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.