Millennium Lighting 9332-SN Traditional Vanity Light Instruction Manual

Introduksjon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Millennium Lighting 9332-SN Traditional Vanity Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Millennium Lighting 9332-SN is a two-light vanity fixture designed for indoor use, featuring a satin nickel finish and metal construction. It is suitable for damp locations and is UL listed for safety.

Image: The Millennium Lighting 9332-SN Traditional Vanity Light, showcasing its satin nickel finish and two frosted glass shades.

Viktige sikkerhetsinstruksjoner

ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringsskapet eller sikringsbryteren før installasjon eller service.

• Alle elektriske tilkoblinger må være i samsvar med lokale forskrifter, forordninger eller National Electric Code (NEC). Kontakt en kvalifisert elektriker hvis du ikke er kjent med riktig elektrisk tilkobling.
• Bruk kun UL- eller ETL-listede ledningskontakter.
• Dette produktet er kun beregnet for innendørs bruk.
• Ikke overskrid maksimumsverdientage specified for the light bulbs.
• Advarsel for forslag 65: Dette produktet kan inneholde kjemikalier som er kjent for staten California for å forårsake kreft, fødselsskader eller andre reproduksjonsskader. Vask hendene etter håndtering.

Pakkeinnhold

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture.

• Lysarmaturmontering (1)
• Glassskjermer (2)
• Mounting Hardware Kit (includes mounting strap, outlet box screws, wire connectors, ground screw) (1)

Oppsett og installasjon

Nødvendig verktøy (ikke inkludert)

• Phillips skrutrekker
• Flat skrutrekker
• Trådstrippere
• Tang
• Elektrisk tape

Trinn-for-trinn installasjon

1. Slå av strømmen: Before starting installation, ensure the power to the electrical outlet box is turned off at the circuit breaker or fuse box.
2. Prepare Mounting Strap: Attach the mounting strap to the outlet box using the provided outlet box screws. Ensure the strap is securely fastened.
3. Lag elektriske tilkoblinger:
   • Connect the bare copper ground wire from the fixture to the ground wire from the outlet box (usually bare copper or green) using a wire connector. Secure the ground wire to the mounting strap with the green ground screw.
   • Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire connector.
   • Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire connector.
   • Wrap all wire connections with electrical tape for added security.
4. Festefeste: Carefully tuck all wires into the outlet box. Align the fixture's backplate with the mounting strap and secure it with the provided mounting screws.
5. Installer lyspærer: Insert the recommended light bulbs (not included) into the sockets. Do not exceed 100 watts per bulb.
6. Fest glassskjermer: Secure the glass shades to the fixture according to the specific design (e.g., by threading a ring or using set screws). Ensure they are snug but do not overtighten.
7. Gjenopprett kraften: Når installasjonen er fullført, gjenoppretter du strømmen til sikringsskapet eller strømbryteren.

Bruksanvisning

The Millennium Lighting 9332-SN vanity light operates via a standard wall switch (not included). Once installed and power is restored, use the wall switch to turn the light fixture on or off.

• Pæretype: This fixture requires two incandescent or compatible LED bulbs.
• Wattage: Each bulb socket supports a maximum of 100 watts. Do not exceed this limit to prevent overheating and potential damage.

Vedlikehold

Pleie og rengjøring

• Koble alltid fra strømmen før rengjøring.
• For å rengjøre armaturen, tørk den av med en myk, tørr klut.
• Ikke bruk slipende rengjøringsmidler, løsemidler eller poleringsmidler, da disse kan skade overflaten.
• Clean glass shades with a mild glass cleaner and a soft cloth.

Bytte av pære

• Ensure power is off at the circuit breaker before replacing bulbs.
• La pærene avkjøles helt før du berører dem.
• Unscrew the old bulb and screw in a new bulb of the same type and wattage (maks. 100 W).

Feilsøkingsveiledning

Produktspesifikasjoner

Garanti og støtte

Garantiinformasjon

This Millennium Lighting product is covered by a manufacturer's warranty. Please refer to the warranty documentation included with your purchase or contact Millennium Lighting directly for specific terms and conditions.

Kundestøtte

For technical assistance, missing parts, or warranty claims, please contact Millennium Lighting customer support. Contact information can typically be found on the product packaging or the manufacturer's official webnettstedet.