Yaheetech Single Metal Bed Frame 90 x 190 cm Instruction Manual

Produkt overview

This manual provides detailed instructions for the assembly, use, and maintenance of your Yaheetech Single Metal Bed Frame. Please read this manual thoroughly before assembly and retain it for future reference.

Image: The Yaheetech Single Metal Bed Frame in black, showcasing its elegant headboard and footboard design.

Sikkerhetsinformasjon

• Sørg for at alle komponenter er til stede og uskadet før monteringen starter. Ikke bruk hvis noen deler mangler eller er ødelagte.
• Assembly should be performed by adults. Two people are recommended for easier and safer assembly.
• Plasser sengerammen på en flat, stabil overflate under montering.
• Tighten all screws and bolts securely, but do not overtighten to avoid stripping threads.
• Sjekk regelmessig alle festemidler for å sikre at de holder seg stramme.
• Ikke stå på sengerammen eller bruk den som stige.
• Ensure the mattress used is compatible with the bed frame dimensions (90 x 190 cm).
• Hold små deler unna barn for å unngå kvelningsfare.
• Maximum weight capacity: 136 kg. Do not exceed this limit.
• Be aware of sharp edges or metal parts during assembly and use to prevent injury.

Pakkeinnhold

Verify that all parts listed below are included in your package. If any parts are missing, please contact customer support.

Image: A diagram illustrating all individual components of the bed frame and hardware, organized for easy identification.

Komponenter:

• Hodegavl- og fotgavlseksjoner
• Sideskinner
• Center support legs
• Metalllameller

Maskinvare:

• Various screws and bolts (A, B, C, D, E, F, G, H, I as per video)
• Allen key / Wrench (provided)

Monteringsveiledning

Follow these steps carefully for proper assembly. It is recommended to assemble the bed frame with another person.

1. Trinn 1: Monter hodegavl og fotgavl

   Attach the decorative top sections to the main vertical posts of both the headboard and footboard using the designated screws and washers. Ensure they are securely fastened.

   

   Bilde: En detaljert view of the headboard, highlighting the decorative scrollwork and connection points.

2. Step 2: Connect Side Rails to Headboard and Footboard

   Attach the side rails to the assembled headboard and footboard posts. Use the appropriate bolts and tighten them with the provided tool. Ensure the connections are firm and stable.

3. Step 3: Install Center Support Legs and Frame

   Assemble the central support structure, including the center support legs. Attach this assembly to the side rails using the specified hardware. This provides crucial stability for the bed frame.

   

   Bilde: Et nærbilde view of the robust metal slats and the central support beam, illustrating the bed's stable structure.

4. Step 4: Insert Metal Slats

   Carefully insert the metal slats into the designated slots on the side rails. Ensure each slat is properly seated and secured. Some designs may require pressing the slats firmly into place.

   

   Image: An illustration demonstrating the correct method to align and press the metal pipes (slats) into the notches on the bed frame for secure fitting.

5. Trinn 5: Endelig stramming og inspeksjon

   Once all parts are assembled, re-check all bolts and screws to ensure they are tight. Do not overtighten. Verify the bed frame is stable and level before placing a mattress on it.

Bruk

• Place a compatible mattress (90 x 190 cm) on the assembled bed frame.
• The bed frame is designed for single occupancy with a maximum weight capacity of 136 kg.
• Utilize the 32.5 cm (12.5 inches) space under the bed for storage of items like shoes or suitcases, helping to maximize room space.

Image: The bed frame in a bedroom setting, demonstrating the ample 32.5 cm under-bed storage space with storage boxes visible.

Vedlikehold

• Rengjøring: Tørk av metallrammen med annonseamp cloth to remove dust and dirt. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Festekontroll: Periodically inspect all bolts and screws to ensure they are tight. Re-tighten as necessary to maintain stability and prevent squeaking.
• Vektfordeling: Distribute weight evenly on the bed to prevent stress on specific areas of the frame or slats.

Feilsøking

• Knirkende lyder: If the bed frame squeaks, check all bolts and screws and tighten them. Ensure all slats are properly seated.
• Ustabilitet: If the bed feels unstable, verify that all connections are secure and that the bed is placed on a level surface. Check if any parts are bent or damaged.
• Madrassgliding: The bed frame includes features to prevent mattress movement. Ensure these are correctly positioned. If sliding persists, consider using a non-slip mat between the mattress and slats.

Image: A close-up of a bed frame corner, illustrating the integrated design feature intended to prevent the mattress from sliding.

Spesifikasjoner

Image: A technical diagram displaying the overall dimensions, applicable mattress size, and maximum weight capacity of the bed frame.

Garanti og støtte

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Yaheetech website. You can also contact Yaheetech customer service directly for assistance.

Besøk Yaheetech Store for flere produkter og informasjon.