Neakhmer Portable Tire Inflator

Introduksjon

Thank you for choosing the Neakhmer Portable Tire Inflator. This compact and powerful cordless air compressor is designed for convenient inflation of various items, including car, bicycle, and motorcycle tires, as well as sports balls and inflatable toys. Featuring a built-in rechargeable battery, digital pressure gauge, and automatic shut-off, it provides efficient and precise inflation wherever you are.

Image: The Neakhmer Portable Tire Inflator shown with its various accessories, including the air hose, different nozzles, and charging cables.

Sikkerhetsinformasjon

• Les alle instruksjonene før bruk.
• Oppbevares utilgjengelig for barn.
• Ikke bruk pumpen i våte forhold eller i nærheten av brennbare væsker eller gasser.
• Ensure the correct pressure setting for the item being inflated to avoid over-inflation and potential damage or injury.
• Ikke la pumpeenheten være uten tilsyn under bruk.
• Allow the device to cool down if it becomes hot during prolonged use.
• Use only the provided charging cables and adapters.

Pakkeinnhold

Vennligst sjekk pakken for følgende varer:

• Neakhmer Portable Tire Inflator (Model CZCQ-101)
• Luftslange med Schrader-ventilkobling
• Presta ventiladapter
• Ballnåladapter
• Svømmeringdyse
• USB Type-C ladekabel
• 12V Car Cigarette Lighter Power Cable
• Oppbevaringspose
• Brukerhåndbok (dette dokumentet)

Oppsett og lading

Lader enheten

The Neakhmer Portable Tire Inflator features a built-in 6000mAh rechargeable battery. Before first use, fully charge the device.

• Using USB Type-C: Connect the provided USB Type-C charging cable to the inflator's Type-C port and the other end to a 5.0V 2.0A USB charger (not included) or a compatible USB power source. A full charge takes approximately 4 hours.
• Using 12V Car Power: For charging on the go or for direct power when the battery is low, connect the 12V car cigarette lighter power cable to the inflator and your vehicle's 12V outlet. Ensure your car engine is running for optimal charging and direct power supply.

Image: The inflator being charged using both the DC 12V car cigarette lighter cable and a standard AC 110V wall adapter with a USB Type-C cable.

Image: Illustration of the two power supply methods: direct DC 12V from a car and cordless operation using the built-in 6000mAh battery.

Bruksanvisning

Slår på/av

Trykk og hold inne strømknappen (●) for a few seconds to turn the inflator on or off. The LCD screen will illuminate.

Selecting Units and Modes

The inflator supports four pressure units: PSI, BAR, KPA, and Kg/cm².

• To select unit: HOLDE the "Loop button" (often indicated by a circular arrow or 'M' for Mode) to cycle through the available pressure units.
• To select mode: KLIKK the "Loop button" to switch between preset inflation modes (e.g., car, motorcycle, bicycle, ball). Each mode may have a default pressure value.

Image: The inflator's digital display, illustrating the ability to switch between PSI, BAR, KPA, and Kg/cm² units. Various inflation nozzles are also shown.

Stille inn måltrykk

Once the desired unit and mode are selected, use the '+' and '-' buttons to adjust the target pressure value. The display will show the current pressure and the set target pressure.

Connecting to Item for Inflation

• Screw the air hose securely onto the inflator's air outlet.
• Select the appropriate nozzle adapter for your item (e.g., Presta valve adapter for certain bike tires, ball needle for sports balls, swimming ring nozzle for inflatables).
• Attach the air hose with the selected adapter firmly to the valve stem of the item you wish to inflate. Ensure a tight seal to prevent air leakage.

Image: The portable tire inflator connected to a bicycle tire, demonstrating its use for bike inflation.

Starting and Stopping Inflation

• After setting the target pressure and connecting the hose, press the power button (●) briefly to start inflation.
• The inflator will automatically stop when the preset target pressure is reached.
• To manually stop inflation at any time, press the power button (●) igjen.
• Carefully disconnect the air hose from the valve stem.

Minnefunksjon

The built-in memory chip will automatically save your last preset pressure value for the next time you inflate the same product, simplifying repeated tasks.

Brukes som en Power Bank

The inflator can function as a power bank to charge your mobile devices in emergencies.

• Locate the USB-A output port on the inflator.
• Connect your device's charging cable to this USB-A port and your device.
• The inflator will begin charging your device.

Image: The inflator demonstrating its power bank capability by charging a smartphone, and also showing its integrated emergency lighting and SOS functions.

Emergency Lighting and SOS Function

The inflator is equipped with a bright LED light for illumination and an SOS flashing mode for emergencies.

• To turn on/off LED light: Press the SOS button (often indicated by a light bulb icon or "SOS") briefly.
• Slik aktiverer du SOS-modus: Press and hold the SOS button to cycle through different light modes, including a flashing SOS signal.

Vedlikehold

• Rengjøring: Tørk av utsiden av pumpeenheten med en myk, tørr klutamp klut. Ikke bruk sterke kjemikalier eller slipende rengjøringsmidler. Sørg for at enheten er slått av og koblet fra strømmen før rengjøring.
• Lagring: Oppbevar pumpen og tilbehøret i den medfølgende oppbevaringsposen på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer.
• Batteripleie: For optimal battery life, charge the device at least once every three months if not in regular use. Avoid fully discharging the battery frequently.

Feilsøking

Spesifikasjoner

Garanti og støtte

Neakhmer products are designed for reliability and performance. For any questions, concerns, or warranty claims, please contact our customer support team.

If you find any missing accessories or have issues with your product, please email us via your order details page "contact seller". We aim to reply within 24 hours.

Vennligst ta vare på kjøpsbeviset av garantihensyn.