Okin JLDQ-12 & JLDQ.12.133.226M Power Recliner Motor Actuator Replacement Instruction Manual

1. Introduksjon

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of the Okin JLDQ-12 and JLDQ.12.133.226M power recliner and bed motor actuator replacement. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

2. Produktet er overview og komponenter

The Okin JLDQ.12.133.226M is an electric linear actuator designed for power recliners and adjustable beds. It is specifically engineered as a direct replacement for the original Okin JLDQ.12.133.226M model.

2.1 Nøkkelkomponenter

• Aktuatormotor: The main unit responsible for linear movement.
• Koblinger:
  • 5-pinners rundplugg: For tilkobling til håndkontrollen med bryter.
  • 2-pinners firkantplugg: For tilkobling til strømforsyning.

Figure 1: Okin JLDQ.12.133.226M motor actuator with attached cables.

Figur 2: Detaljert view of the 5-pin round plug for the recliner switch and the 2-pin square plug for the power supply.

3. Spesifikasjoner

Figure 3: Product label displaying technical data and model information, including serial number Q21061699 00271 og modell JLDQ.12.133.226M. For patent information, visit www.dewertokin.de/patents.

4. Oppsett og installasjon

Viktig kompatibilitetsmerknad: This motor is specifically designed to replace the OKIN model JLDQ.12.133.226M. Different actuator/motors are generally not compatible due to strict requirements for minimum installation dimensions, stroke, and plug types. Always verify your existing motor's brand and model before attempting replacement.

4.1 Kontroller før installasjon

1. Bekreft modell: Confirm that your existing motor is an Okin JLDQ.12.133.226M.
2. Strømfrakobling: Ensure the power supply to the recliner or bed is completely disconnected before starting any installation work.
3. Inspiser komponenter: Check the new motor and cables for any visible damage.

4.2 Installasjonstrinn

1. Fjern gammel motor: Carefully detach the old motor from the recliner or bed frame. Note how it was connected to ensure correct installation of the new unit.
2. Plassering av ny motor: Align the new Okin JLDQ.12.133.226M motor with the mounting points on the frame.
3. Sikker motor: Fasten the motor securely to the frame using appropriate hardware (not included, typically reused from the old motor or provided with the furniture).
4. Koble til kabler:
   • Koble til 5-pins rund plugg to the hand control switch.
   • Koble til 2-pin square plug to the power supply unit.
5. Kabeladministrasjon: Ensure all cables are routed safely, away from moving parts, and secured to prevent pinching or damage.

Figur 4: Eksample of the motor actuator mounted, showing its extended position.

5. Bruksanvisning

Once the motor is correctly installed and all connections are secure, reconnect the main power supply to your recliner or adjustable bed.

1. Strøm på: Plug the recliner/bed into a suitable power outlet.
2. Håndkontroll: Use the hand control unit to operate the recliner or bed. Press and hold the appropriate buttons to extend or retract the actuator, adjusting the position as desired.
3. Driftssyklus: Adhere to the specified operation frequency: På 1 minutt / Av 8 minutter. Continuous operation beyond 1 minute can lead to overheating and damage to the motor. Allow the motor to cool down for at least 8 minutes after 1 minute of continuous use.

6. Vedlikehold

Regular maintenance ensures the longevity and reliable operation of your Okin motor actuator.

• Rengjøring: Wipe clean the exterior of the motor and cables with a dry or slightly damp klut. Ikke bruk slipende rengjøringsmidler eller senk enheten i vann.
• Kabelinspeksjon: Periodically check all cables and connections for wear, fraying, or loose plugs. Ensure they are securely attached and not pinched.
• Bevegelige deler: Ensure the linear shaft moves freely and is not obstructed by debris or fabric.
• Smøring: The motor is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by Okin support.

7. Feilsøking

If your recliner or adjustable bed is not functioning correctly, follow these troubleshooting steps:

1. Ingen bevegelse:
   • Check if the power cord is securely plugged into the wall outlet and the power supply unit.
   • Verify that the 2-pin square plug from the motor is firmly connected to the power supply.
   • Ensure the 5-pin round plug from the motor is properly connected to the hand control.
   • Test the wall outlet with another appliance to confirm it has power.
2. Intermittent Movement:
   • Inspiser alle kabeltilkoblinger for løse eller skadede deler.
   • Ensure the motor is not overheating. Allow it to cool down if it has been operated continuously.
3. Uvanlige lyder:
   • Check for any obstructions around the motor or the linear shaft.
   • Ensure the motor is securely mounted and not vibrating against the frame.
4. Motor Does Not Extend/Retract Fully:
   • Verify that there are no physical obstructions preventing full movement.
   • Ensure the motor is correctly installed with the specified minimum and maximum installation sizes.

If issues persist after following these steps, contact Okin customer support or a qualified technician.

8. Viktig sikkerhetsinformasjon

• Always disconnect power before performing any installation, maintenance, or cleaning.
• Dette produktet er kun beregnet for innendørs bruk.
• Do not allow children or pets to play near the moving parts of the recliner or bed.
• Ensure proper cable routing to prevent tripping hazards or damage to the cables.
• Do not attempt to modify the motor or its components. Unauthorized modifications can lead to malfunction and void the warranty.
• Only use this motor as a replacement for the specified Okin JLDQ.12.133.226M model. Using incompatible parts can cause damage to the furniture and the motor.

9. Garanti og støtte

For warranty information, technical support, or further assistance, please refer to the official Okin website or contact your product retailer. Keep your purchase receipt as proof of purchase for warranty claims.

You can visit the Okin store for more products and information: Okin-butikken på Amazon.