Technics SL-1200MK7

Technics SL-1200MK7 direktedrevet platespiller brukerhåndbok

Model: SL-1200MK7

Introduksjon

This manual provides essential instructions for the proper setup, operation, and maintenance of your Technics SL-1200MK7 Direct Drive Turntable. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. Keep this manual for future reference.

Technics SL-1200MK7 Direct Drive Turntable

Image: A black Technics SL-1200MK7 direct drive turntable, featuring a slipmat with the Technics logo, a tonearm, and pitch control faders. This image illustrates the overall design of the turntable.

Sikkerhetsinstruksjoner

To prevent electric shock, fire, damage, or injury, please observe the following safety precautions:

  • Ikke utsett denne enheten for regn eller fuktighet.
  • Ikke fjern dekselet. Service må kun utføres av kvalifisert personell.
  • Ensure the unit is placed on a stable, level surface to prevent vibrations and ensure proper operation.
  • Connect the unit to a grounded power outlet. Proper grounding is essential to prevent humming and ensure sound quality.
  • Unngå å plassere enheten i nærheten av varmekilder eller i direkte sollys.
  • Oppbevares utilgjengelig for barn.

Hva er i esken

Verify that all the following components are included with your Technics SL-1200MK7 turntable:

  • Platespillerenhet
  • Slipmatte
  • Slipsheet
  • Støvdeksel
  • EP-plateadapter
  • Balansevekt
  • Hodeskall
  • Screw set for cartridge
  • PHONO kabel
  • PHONO jordledning
  • Strømledning
  • Brukerhåndbok (dette dokumentet)

Oppsett

Follow these steps to properly set up your turntable:

  1. Utpakking og plassering: Carefully remove all components from the packaging. Place the turntable on a firm, level surface, away from speakers to minimize vibration feedback.
  2. Stylus/Cartridge Installation: Attach your chosen cartridge to the head shell using the provided screw set. Note: A stylus is not included with the turntable and must be purchased separately.
  3. Tonearm Balance and Tracking Force:
    • Attach the head shell with the cartridge to the tonearm.
    • Mount the balance weight onto the rear of the tonearm.
    • Adjust the balance weight until the tonearm is perfectly level (floating freely).
    • Set the tracking force ring to "0" while the tonearm is balanced.
    • Rotate the balance weight to apply the recommended tracking force for your cartridge (typically 0-4g, as per the turntable's adjustment range).
  4. Anti-skøytejustering: Set the anti-skating dial to match the tracking force you applied. This helps prevent the stylus from skipping inwards.
  5. Arm-Height Adjustment: The tonearm height can be adjusted from 0 to 6 mm to ensure the tonearm is parallel to the record surface when playing. Use the tonearm height adjustment ring at the base of the tonearm.
  6. Koble til kabler:
    • Connect the PHONO cable from the turntable's output to the PHONO input on your amplifier eller mottaker.
    • Connect the PHONO earth lead (ground wire) from the turntable to the ground terminal on your amplivligere. Proper grounding is crucial to eliminate hum.
    • Connect the AC power supply cord to the turntable and then to a wall outlet.
  7. Støvdeksel: Place the dust cover on the turntable to protect it when not in use.

Bruksanvisning

Once set up, operating your SL-1200MK7 is straightforward:

  1. Strøm på: Slå på platespilleren med strømbryteren.
  2. Velg hastighet: Choose the appropriate speed (33-1/3, 45, or 78 rpm) using the speed selector buttons. For 78 rpm, ensure the switch is engaged.
  3. Stedsrekord: Carefully place a record on the platter. If playing an EP record, use the provided adaptor.
  4. Start avspilling:
    • Løft tonearmen ved hjelp av signalspaken.
    • Trykk på START/STOPP button to begin platter rotation. The platter will reach the selected speed quickly due to the direct drive system (approx. 0.7 seconds to 33 1/3 rpm).
    • Carefully position the stylus over the desired groove on the record.
    • Senk tonearmen forsiktig ved hjelp av signalspaken.
  5. Juster tonehøyde: Use the pitch control fader to fine-tune the playback speed if desired.
  6. Stopp avspilling: At the end of the record, or when you wish to stop, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the START/STOPP button to halt platter rotation.

Vedlikehold

Regular maintenance ensures the longevity and optimal performance of your turntable:

  • Rengjøring av støvdekselet: Use a soft, dry cloth to wipe the dust cover. For stubborn marks, use a slightly damp klut og tørk umiddelbart. Unngå slipende rengjøringsmidler.
  • Cleaning the Platter and Chassis: Wipe the metal platter and turntable chassis with a soft, dry cloth. Do not use solvents or harsh chemicals.
  • Styluspleie: Regularly clean your stylus with a dedicated stylus brush or cleaner to remove dust and debris, which can affect sound quality and record wear.
  • Opptakspleie: Keep your records clean and stored properly to prevent dust accumulation and scratches.
  • Unngå væsker: Do not spill liquids on the turntable. If liquid enters the unit, disconnect power immediately and consult a qualified technician.

Feilsøking

Hvis du støter på problemer med platespilleren, kan du se følgende vanlige problemer og løsninger:

ProblemMulig årsakLøsning
No sound or humming noiseImproper grounding; PHONO cable not connected; Stylus not installed correctly.Ensure the PHONO earth lead is securely connected to your amplifier's ground terminal. Verify PHONO cable connections. Check stylus installation and cartridge wiring.
Start/Stop button feels stiff or sticksButton pressed incorrectly (e.g., from the edge); Internal mechanism issue.Press the START/STOP button firmly and directly in the center. If the issue persists, contact customer support.
Lyden er forvrengt eller hopperIncorrect tracking force or anti-skating; Dirty stylus; Damaged record.Re-adjust tracking force and anti-skating. Clean the stylus. Inspect the record for damage.
One channel is quieter than the otherLoose cartridge wiring; Damaged stylus; Imbalance in ampinnstillinger for kjøler.Check the wiring between the cartridge and head shell. Inspect the stylus for damage. Verify ampinnstillinger for forsikringssaldo.
Feedback or vibration noiseTurntable placed on an unstable surface; Too close to speakers.Ensure the turntable is on a solid, level, and isolated surface. Move the turntable further away from speakers.

Spesifikasjoner

Key technical specifications for the Technics SL-1200MK7 Direct Drive Turntable:

  • Type: Direct Drive Manual Turntable
  • Dreieskivehastigheter: 33-1/3, 45 rpm (with switch 78 rpm)
  • Startmoment: 0.18 N·m / 1.8 kg·cm
  • Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
  • Wow Og Flutter: 0.025 % WRMS
  • Tallerkendiameter: 332 mm (13-5/64 tommer)
  • Tonearm Effective Length: 230 mm (9-1/16")
  • Tonearm Overhang: 15 mm (19/32")
  • Tonearm Offset Angle: 22°
  • Sporingsfeilvinkel: Within 2° 32’ (at the outer groove of 30 cm (12") record) / Within 0° 32' (at the inner groove of 30 cm (12") record)
  • Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
  • Arm-height Adjustment Range: 0–6 mm
  • Head Shell Weight: Ca. 7.6 g
  • Strømforsyning: AC 110-240 V, 60 Hz
  • Strømforbruk: 8 W
  • Dimensjoner (B x H x D): 453 x 169 x 353 mm (17.8 x 6.7 x 13.9 tommer)
  • Vekt: Ca. 9.6 kg / 21.2 lbs
  • Materiale: Metal (Chassis)
  • Farge: Svart

Garanti og støtte

For garantiinformasjon og kundestøtte, se garantikortet som følger med produktet, eller besøk den offisielle Technics-siden. webnettstedet.

Nettressurser:

© 2023 Technics. Alle rettigheter forbeholdt.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.