1. Introduksjon
This manual provides essential instructions for the safe and efficient use of your PowerSmart 2A Power Supply, designed specifically for Phylion and Joycube e-bike batteries with a 5-pin Li-Ion connector. Please read this manual thoroughly before using the product and retain it for future reference.
2. Sikkerhetsinstruksjoner
- Les alle instruksjonene: Før du bruker laderen, les alle instruksjoner og advarselsmerker på laderen, batteriet og produktet som bruker batteriet.
- Bare innendørs bruk: This charger is designed for indoor use only. Do not expose it to rain, moisture, or extreme temperatures.
- Riktig voltage: Sørg for at inngangsvoltage (100V-240V) matches your local power supply.
- Unngå kortslutninger: Do not short-circuit the output terminals.
- Use correct connector: Only use with Phylion/Joycube e-bike batteries requiring a 5-pin Li-Ion connector. Using an incompatible connector may damage the charger or battery.
- Ventilasjon: Sørg for tilstrekkelig ventilasjon rundt laderen under bruk. Ikke dekk til laderen.
- Trekk ut støpselet når det ikke er i bruk: Disconnect the charger from the power outlet when not in use or before cleaning.
- Barn og kjæledyr: Hold laderen utilgjengelig for barn og kjæledyr.
- Skadede komponenter: Do not operate the charger if the cord, plug, or housing is damaged. Contact customer support for replacement.
- No user-serviceable parts: Do not attempt to open or repair the charger. This will void the warranty and may cause electric shock.
3. Produktet er overview
The PowerSmart 2A Power Supply is a dedicated charger for specific e-bike batteries. It features a robust design and a specialized 5-pin connector for secure and efficient charging.
Figur 3.1: PowerSmart 2A Power Supply showing the main unit and the specialized 5-pin trapezoid connector for Phylion/Joycube batteries.
3.1 Pakkeinnhold
- 1 x PowerSmart 2A Power Supply (Model: CAA081020E.501_5)
- 1 x AC Power Cord (if not integrated)
3.2 Nøkkelfunksjoner
- Compatible with Phylion/Joycube e-bike batteries.
- Specific 5-pin trapezoid connector (9.5 mm).
- Inngang Voltage: 100V-240V AC.
- Utgang Voltage: 42V DC.
- Output Current: 2.0A.
- Power Rating: 84W.
- Lightweight design (approx. 0.5 kg).
Figur 3.2: Detaljert view of the PowerSmart 2A Power Supply, including the AC power cord and a diagram illustrating the 5-pin connector dimensions (6.5mm x 9.5mm) for 36V batteries (which charge to 42V).
4. Oppsett
- Pakke ut: Carefully remove the power supply and any accessories from the packaging.
- Undersøke: Check the charger and cables for any visible damage. Do not use if damaged.
- Koble til vekselstrøm: Plug the AC power cord into the charger's input port, then plug the other end into a standard wall outlet (100V-240V).
- Klargjør batteri: Ensure your e-bike battery is clean and its 5-pin charging port is free of debris.
5. Bruksanvisning
- Koble til batteri: Carefully align the 5-pin trapezoid connector of the charger with the charging port on your Phylion/Joycube e-bike battery. Insert firmly.
- Ladeindikator: The charger typically has an LED indicator.
- Rød LED: Indikerer at batteriet lades for øyeblikket.
- Grønn LED: Angir at batteriet er fulladet.
- Ladetid: Charging time will vary depending on the battery's capacity and its current charge level. Do not overcharge the battery beyond the green LED indication.
- Frakople: Once the battery is fully charged (Green LED), first disconnect the 5-pin connector from the battery, then unplug the AC power cord from the wall outlet.
Viktig: Always connect the charger to the battery first, then to the wall outlet. When disconnecting, always unplug from the battery first, then from the wall outlet.
6. Vedlikehold
- Rengjøring: Koble laderen fra alle strømkilder før rengjøring. Bruk en myk, tørr klut til å tørke av utsiden. Ikke bruk flytende rengjøringsmidler eller løsemidler.
- Lagring: Oppbevar laderen på et kjølig og tørt sted, unna direkte sollys og fuktighet når den ikke er i bruk.
- Kabelpleie: Avoid bending or crimping the power cords excessively. Do not wrap the cords tightly around the charger.
7. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Laderens LED-lampe lyser ikke. | No power from outlet; loose connection; damaged charger. | Check wall outlet with another device; ensure all connections are secure; if still no power, charger may be faulty. |
| Battery not charging (Red LED not on). | Incorrect battery connection; incompatible battery; battery fault. | Ensure 5-pin connector is fully inserted and correctly aligned; verify battery compatibility; consult e-bike battery manual. |
| Laderen blir for varm. | Poor ventilation; faulty charger/battery. | Ensure charger is in a well-ventilated area; discontinue use if overheating persists and contact support. |
If troubleshooting steps do not resolve the issue, please contact PowerSmart customer support.
8. Spesifikasjoner
| Modellnummer | CAA081020E.501_5 |
| Kompatible delenumre | SSLC084V42M |
| Inngang Voltage | 100V-240V AC |
| Utgang Voltage | 42V DC |
| Utgangsstrøm | 2.0A |
| Effektvurdering | 84W |
| Koblingstype | 5-pin Trapezoid (9.5 mm) |
| Anbefalt bruk | Phylion/Joycube E-bike Batteries |
| Vekt | Ca. 0.5 kg (500 gram) |
9. Garanti og støtte
Specific warranty information is not provided in the product details. Please refer to your purchase documentation or contact the seller, Batterie Center, for details regarding warranty coverage and customer support.
For technical assistance or inquiries, please contact PowerSmart customer service or the retailer from whom you purchased the product.
Selger: Batterie Center