PRORECK PR-122M Dual 12-inch Car Subwoofer System

1. Introduksjon

Thank you for choosing the PRORECK PR-122M Complete Car Subwoofer System. This system is designed to provide powerful and clear bass for your vehicle's audio setup. It includes a dual 12-inch subwoofer in a loaded enclosure, a mono block amplifier, and a complete wiring installation kit. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new car audio system.

2. Sikkerhetsinformasjon

Les alle instruksjonene nøye før installasjon og bruk. Unnlatelse av å følge disse retningslinjene kan føre til skade på produktet, kjøretøyet eller personskade.

• Profesjonell installasjon anbefalt: If you are unsure about any aspect of installation, consult a qualified car audio technician.
• Koble fra batteriet: Koble alltid fra bilens negative batteripol før du starter elektrisk arbeid for å unngå kortslutning.
• Riktig ledning: Ensure all wiring is correctly routed, secured, and insulated to prevent damage from pinching, abrasion, or heat. Use appropriate gauge wires as specified.
• Ventilasjon: Monter amplifier in a location that allows for adequate airflow to prevent overheating.
• Sikker montering: Securely mount the subwoofer enclosure and amplifier to prevent them from shifting during vehicle movement, which could cause injury or damage.
• Volumnivåer: Langvarig eksponering for høyt volum kan forårsake hørselsskade. Juster volumet på en ansvarlig måte.

3. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• PRORECK PR-1500.1M Mono Block Ampforsterker (1)
• Dual 12-inch Car Subwoofer in Loaded Enclosure (1)
• Fullstendig Amplifier Installation Wire Kit (1)

The wiring kit includes:

• High Grade Twisted Pair 100% Copper RCA Cables
• Blue Super Flex Power Cable
• Svart jordledning
• Black Remote Cable and Remote Control
• Black Split Tube
• Høyttalerledning
• Gold Plated ANL Heat Resistant Fuse Holder
• 30 Amp ANL Gold Plated Fuse
• Accessories: Wire ties, ring terminals, butt connectors, spades, and grommet

Image: All components included in the PRORECK wiring installation kit.

4. Oppsett og installasjon

Proper installation is critical for optimal performance and safety. Follow these steps carefully.

4.1 Subwoofer Enclosure Placement

Place the dual 12-inch subwoofer enclosure in a secure location within your vehicle, typically the trunk or cargo area. Ensure it is firmly anchored to prevent movement during driving. The enclosure features a 15% angle for optimal vehicle bass alignment.

Bilde: Foran view of the PRORECK PR-122M dual 12-inch subwoofer enclosure.

Bilde: Bak view of the PRORECK PR-122M subwoofer enclosure, showing the speaker terminals.

4.2 Amplivligere montering

Mount the PRORECK PR-1500.1M amplifier in a dry, well-ventilated area, away from direct sunlight or heat sources. Ensure there is sufficient space around the amplifier for proper heat dissipation. Secure it firmly to a solid surface using appropriate hardware.

Bilde: Topp view of the PRORECK PR-1500.1M amplifier, showing the control panel.

Bilde: Side view of the PRORECK PR-1500.1M amplifier, showing the power and speaker terminals.

4.3 Kablingstilkoblinger

Refer to the diagram below for detailed connection points on the PRORECK PR-1500.1M amplifier. Use the provided wiring kit for all connections.

Image: Detailed diagram of the PRORECK PR-1500.1M amplifier's input, output, and control connections.

1. Power Connections (GND, REM, +12V):
   • GND (bakke): Connect the black ground wire from the wiring kit to a clean, unpainted metal surface on the vehicle chassis. Ensure a solid, low-resistance connection.
   • REM (fjernstyrt påslåing): Connect the black remote cable from the wiring kit to the remote turn-on output of your head unit. This wire turns the amplifier on and off with your car's stereo.
   • +12V (strøm): Connect the blue super flex power cable from the wiring kit to the positive terminal of your car battery. Install the 30 Amp ANL fuse holder and fuse as close to the battery as possible (within 18 inches) for protection.
2. Speaker Output (4 ohm): Connect the speaker wire from the subwoofer enclosure to the speaker output terminals on the amplifier. Ensure correct polarity (+ to + and - to -). The subwoofer system is designed for a 4-ohm mono-block connection.
3. RCA linjeinngang: Connect the RCA cables from your head unit's RCA pre-outs to the RCA Line Input on the amplivligere.
4. Høynivåinngang: If your head unit does not have RCA pre-outs, you can use the High Level Input by connecting it directly to your head unit's speaker outputs.
5. Full-Range RCA Output: This output can be used to daisy-chain the audio signal to another amplivligere.
6. Dashboard Bass Remote Control Interface: Connect the remote control cable to this port.
7. FUSE (30A): De amplifier has a built-in 30A fuse for protection.

5. Bruksanvisning

Når den er installert, juster ampLifier-innstillinger for optimal lydytelse.

5.1 Amplivligere kontroller

The PRORECK PR-1500.1M amplifier features several controls to fine-tune your bass output:

• Input Gain Control: Adjust this to match the output voltage of your head unit. Start with the gain at minimum and slowly increase it until you achieve clear, undistorted bass. Avoid setting it too high, as this can cause distortion.
• Bass EQ (5-12dB Narrow Bass Equalizer): Use this control to boost the bass frequencies. Adjust carefully to avoid over-emphasizing bass, which can lead to distortion.
• Fully Adjustable Low Pass Crossover (LPF): This filter allows only frequencies below the set point to pass through to the subwoofer. Adjust the LPF (e.g., 50Hz-250Hz) to blend the subwoofer's output seamlessly with your main speakers.
• Fully Adjustable Subsonic Filter: This filter removes extremely low frequencies that are inaudible and can cause the subwoofer to waste power and potentially damage itself. Set it slightly below your LPF setting, typically between 15Hz-50Hz.
• Mute & Delay Turn On Circuitry: This feature prevents turn-on thumps or pops.
• Power & Diagnostic LED Indicators: Disse LED-lampene indikerer amplifier's status. A green light typically indicates power, while a red light may indicate a protection mode or fault.

5.2 Dashboard Bass Remote Control

The included dashboard remote allows you to conveniently adjust the bass level from your driver's seat without needing to access the ampkjøler direkte.

6. Vedlikehold

To ensure the longevity and performance of your PRORECK subwoofer system, follow these simple maintenance guidelines:

• Rengjøring: Tørk av med jevne mellomrom amplifier and subwoofer enclosure with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Sjekk tilkoblinger: Regularly inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
• Ventilasjon: Sørg for at amplifier's ventilation fins remain clear of obstructions to prevent overheating.
• Unngå fuktighet: Keep the system dry and away from excessive moisture.

7. Feilsøking

If you experience issues with your PRORECK subwoofer system, refer to the following common problems and solutions:

8. Spesifikasjoner

Detailed specifications for the PRORECK PR-122M Subwoofer System:

• Produkttype: Complete Car Subwoofer System
• Modell: PR-122M
• Subwoofer størrelse: Dobbel 12-tommers
• Toppkraft: 1500 watt
• RMS Power (Amplivligere): 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N
• Dynamic Power (Amplivligere): 400 watt @ 2 ohm
• Frekvensrespons: 15Hz–20kHz
• Amplivligere klasse: Class A/B Mono-Block
• Innkapslingsmateriale: High quality aviation grade tweed carpet with embroidery
• Enclosure Angle: 15% (for vehicle bass alignment)
• Talespoler: High power 1.5" aluminum 4-layer voice coils
• Tilkoblingsteknologi: RCA
• Lydutgangsmodus: Mono
• Amplifier Dimensions (L x W x H): 11 x 9.1 x 1.9 tommer
• Subwooferens mål (L x B x H): 28.7 x 14.2 x 15.7 tommer

9. Garanti og støtte

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official PRORECK webnettstedet. Ta vare på kjøpsbeviset for eventuelle garantikrav.