Hama 00118498

Hama 00118498 Monitor Desk Mount Instruction Manual

Modell: 00118498

Introduksjon

This manual provides detailed instructions for the installation, operation, and maintenance of your Hama 00118498 Monitor Desk Mount. Designed to enhance your ergonomic workspace, this monitor arm allows for flexible positioning of your display, promoting a comfortable and productive environment. Please read these instructions carefully before beginning installation.

Oppsettinstruksjoner

Follow these steps to correctly install your Hama 00118498 Monitor Desk Mount.

1. Feste skrivebordsklemmenamp

  1. Plasser skrivebordet clamp assembly onto the edge of your desk. Ensure the desk surface is sturdy and can support the weight of the mount and your monitor.
  2. Stram til clamp screw firmly until the mount is securely fastened to the desk. Do not overtighten.
Close-up of the Hama monitor arm desk clamp mekanisme

Image: The desk clamp mechanism, showing how it attaches to the desk edge for secure mounting.

2. Feste skjermen

  1. Ensure your monitor is VESA compatible (100x100mm or 75x75mm).
  2. Carefully attach the VESA plate from the monitor arm to the back of your monitor using the provided screws. Make sure the screws are tightened securely.
  3. Slide the monitor (with the attached VESA plate) onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanism provided.
Hama monitor arm showing the VESA plate and adjustable joint

Image: The monitor arm's VESA plate and adjustable joint, ready for monitor attachment.

Side view of the Hama monitor arm with cable management and VESA mount

Bilde: En side view of the assembled monitor arm, highlighting the VESA mount and integrated cable management channels.

3. Kabeladministrasjon

Utilize the integrated cable management system to route your monitor cables neatly along the arm. This helps maintain a tidy workspace and prevents cable clutter.

Bruksanvisning

The Hama 00118498 Monitor Desk Mount offers various adjustment options for optimal viewkomfort.

  • Høydejustering: The integrated pneumatic spring allows for smooth and effortless vertical height adjustment. Gently push or pull the monitor to your desired height.
  • Sving: The arm can swivel horizontally, allowing you to rotate your monitor to share your screen or change your viewing vinkel.
  • Tilt: Adjust the monitor's tilt angle (up or down) to reduce glare and find the most comfortable viewing stilling.
  • Rotasjon: Rotate your monitor from landscape to portrait orientation as needed for different tasks.

Adjustments should be smooth. If the monitor does not hold its position, refer to the troubleshooting section for tension adjustments.

Vedlikehold

Regelmessig vedlikehold sikrer levetiden og optimal ytelse for skjermarmen din.

  • Rengjøring: Tørk av overflaten på skjermarmen med en myk klutamp klut. Unngå å bruke slipende rengjøringsmidler eller løsemidler.
  • Sjekk tilkoblinger: Kontroller alle skruer og tilkoblinger med jevne mellomrom for å sikre at de er stramme og sikre. Stram til om nødvendig.
  • Smøring: The pneumatic spring is maintenance-free. Do not attempt to lubricate internal components.

Feilsøking

If you encounter issues with your Hama 00118498 Monitor Desk Mount, refer to the following common problems and solutions:

  • Overvåking av synker eller holder ikke posisjon: The tension of the pneumatic spring may need adjustment. Locate the tension adjustment screw (usually found on the arm joint) and turn it clockwise to increase tension for heavier monitors, or counter-clockwise for lighter monitors. Adjust gradually until the monitor holds its position.
  • Skjermen er vanskelig å flytte: If the arm is too stiff, the tension may be too high. Turn the tension adjustment screw counter-clockwise to decrease tension.
  • Arm Feels Loose on Desk: Sørg for at skrivebordet klamp is fully tightened. If the desk surface is too thin or fragile, consider adding a protective pad between the clamp and the desk.
  • Skjermsvingler: Check all mounting screws on the VESA plate and the arm joints to ensure they are securely fastened.

Spesifikasjoner

Trekk Detalj
Modellnummer 00118498
Monteringstype Skrivebord Clamp
Bevegelsestype Rotating, Swivel, Tilt, Height Adjustable (Pneumatic Spring)
Merke Hama
Materiale Aluminium
Farge Svart
Kompatible enheter Følge
Minimum kompatibel størrelse 10 tommer
Maksimal kompatibel størrelse 32 tommer
Varevekt 2.2 kilo
Opprinnelsesland Kina

Garanti og støtte

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Hama website. You can typically find support contact details, FAQs, and additional resources there.

Offisiell Hama Webnettsted: www.hama.com

© 2023 Hama. Alle rettigheter forbeholdt.