BERTSCHAT PRO Single Heating Heated Mittens User Manual

Introduksjon

Thank you for choosing BERTSCHAT PRO Single Heating Heated Mittens. These mittens are designed to provide warmth and comfort in cold environments, making them ideal for various outdoor activities. Equipped with advanced insulation and heating technology, they ensure your hands stay warm, dry, and protected.

Sikkerhetsadvarsler

ADVARSEL:

Read all safety warnings and instructions carefully before using this product. Failure to follow these warnings and instructions may result in electric shock, fire, or serious injury.

• Do not disassemble the product. Unauthorized modifications can lead to injury or malfunction.
• Ensure batteries are charged using only the provided USB charger.
• Keep the mittens and batteries away from water and extreme heat.
• If you experience discomfort, excessive heat, or any unusual sensation, immediately turn off the mittens and remove them.
• This product is intended for warming the body in cold environments. Do not use for medical purposes or on individuals unable to perceive heat.

Produkt overview

The BERTSCHAT PRO Single Heating Heated Mittens feature a robust design with multiple layers for optimal performance.

Nøkkelfunksjoner:

• Avansert isolasjon: Equipped with HIPORA and 3M Thinsulate for superior warmth, dryness, and wind protection.
• Extensive Heating Surface: Heating elements cover the entire back of the hand and extend to the finger area.
• Justerbare varmeinnstillinger: Three distinct heat levels (low, medium, high) allow for personalized temperature control.
• Powerful Batteries: Powered by two 4000 mAh lithium-polymer rechargeable batteries.
• Long Heat Duration: Provides 2 to 11 hours of heat, depending on the selected heat setting and ambient temperature.
• USB oppladbar: Convenient charging via the included USB cable.
• Kompatibel med berøringsskjerm: Special fingertips allow for use with touchscreen devices without removing the mittens.
• Slitesterk konstruksjon: Features a waterproof shell and a soft polar fleece liner for comfort and protection.

Komponenter inkludert:

• 1 pair of BERTSCHAT PRO Single Heating Heated Mittens
• 2 rechargeable lithium-polymer batteries (4000 mAh each)
• 1 USB-ladekabel

This image displays the product packaging, highlighting the technical fabric layers including a waterproof shell, 3M Thinsulate cotton, heating layer, advanced technology, and a softer polar fleece liner. It also shows icons for various activities like cycling, fishing, boating, motorcycling, hunting, skiing, and hiking, indicating the mittens' versatility. Key features like HIPORA, Waterproof, Windproof, Thinsulate insulation, and touchscreen compatibility are also visible. Note that while the packaging indicates 'up to 8 hours' of heat, the actual duration with the included 4000mAh batteries ranges from 2 to 11 hours depending on the heat setting and environmental conditions.

Oppsett

1. Lading av batteriene

1. Locate the two lithium-polymer batteries and the USB charger cable.
2. Connect the batteries to the USB charger cable.
3. Plug the USB charger cable into a compatible USB power source (e.g., wall adapter, computer USB port, power bank).
4. Allow the batteries to fully charge before first use. The charging indicator light on the battery or charger will change color or turn off when charging is complete.

2. Sette inn batterier

1. Locate the battery pocket inside each mitten, usually near the cuff.
2. Carefully insert one fully charged battery into each pocket.
3. Connect the battery cable from the mitten to the battery. Ensure a secure connection.
4. Close the battery pocket securely, typically with a zipper or hook-and-loop fastener.

Bruksanvisning

1. Slå på/av

• To turn on the mittens, press and hold the power button located on the cuff for approximately 3-5 seconds until an indicator light illuminates.
• To turn off the mittens, press and hold the power button again for 3-5 seconds until the indicator light turns off.

2. Justering av varmenivåer

Once powered on, the mittens will typically start at a default heat setting. To cycle through the heat levels:

• Press the power button briefly (less than 1 second) to change the heat setting.
• The indicator light will change color to show the current heat level:
  • Høy: (e.g., Red light) - Provides maximum heat.
  • Medium: (e.g., White/Orange light) - Provides moderate heat.
  • Lav: (e.g., Blue light) - Provides gentle heat and extends battery life.
• Continue pressing the button to cycle through the settings until you reach your desired warmth.

3. Berøringsskjermfunksjonalitet

The fingertips of these mittens are designed to be touchscreen compatible. This allows you to operate most touchscreen devices without exposing your hands to the cold. Ensure a firm and direct contact between the special fingertip material and the screen for best results.

Vedlikehold

1. Rengjøring

• Fjern alltid batteriene før rengjøring.
• Hand wash the mittens gently with mild soap and cold water. Do not machine wash, tumble dry, or wring.
• Allow the mittens to air dry completely before reinserting batteries or storing. Do not use external heat sources to dry.
• Do not dry clean or iron the mittens.

2. Batteripleie og oppbevaring

• Oppbevar batteriene på et kjølig, tørt sted vekk fra direkte sollys og ekstreme temperaturer.
• For long-term storage, charge batteries to approximately 50-70% capacity every 3-6 months to maintain battery health.
• Do not store batteries connected to the mittens.
• Dispose of old or damaged batteries according to local regulations.

Feilsøking

• Mittens not heating:
  • Ensure batteries are fully charged and correctly inserted into the pockets.
  • Verify that the battery cables are securely connected to the mittens.
  • Press and hold the power button for 3-5 seconds to ensure the mittens are turned on.
  • Check if the indicator light is on. If not, the battery might be depleted or not connected.
• Kort batterilevetid:
  • Battery life varies significantly with the heat setting. High heat consumes more power.
  • Extreme cold environments can also reduce battery efficiency.
  • Sørg for at batteriene er fulladet før hver bruk.
  • Over time, battery capacity may decrease. Consider replacing old batteries if performance significantly degrades.
• Mittens feel too hot or not warm enough:
  • Adjust the heat setting using the power button to cycle through low, medium, and high.
  • Allow a few minutes for the heating elements to reach the desired temperature.
• Berøringsskjermen svarer ikke:
  • Ensure direct and firm contact between the special fingertip material and the screen.
  • Some screen protectors or device settings may affect touchscreen sensitivity.

Spesifikasjoner

Garanti og støtte

For warranty information, technical support, or any questions regarding your BERTSCHAT PRO Single Heating Heated Mittens, please contact BERTSCHAT customer service through their official website or the retailer where the product was purchased. Please have your purchase receipt and product model information ready when contacting support.

Du finner mer informasjon på www.bertschat.eu.