AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Produktet er overview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Nøkkelfunksjoner:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Spesifikasjoner

3. Oppsettveiledning

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Utpakking

1. Ta PC-kabinettet forsiktig ut av emballasjen.
2. Remove any protective films or internal packaging materials.
3. Plasser etuiet på en stabil, flat overflate.

3.2 Hovedkortinstallasjon

1. Fjern sidepanelet i herdet glass ved å skru ut tommelskruene.
2. Installer I/O-skjoldet (hvis det ikke er forhåndsinstallert på hovedkortet) i den bakre åpningen på kabinettet.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Fest hovedkortet med de medfølgende skruene.

3.3 Installasjon av strømforsyning

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Fest strømforsyningen med skruer fra baksiden av kabinettet.

3.4 Installasjon av lagringsstasjon

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Fjern de nødvendige dekslene til utvidelsessporene fra baksiden av kabinettet.
2. Sett grafikkortet eller andre utvidelseskort inn i PCIe-sporene på hovedkortet.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Kjølesystem

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Kabelhåndtering

Bruk utsparingene for kabelføring og festepunkter bak hovedkortbrettet for å organisere kablene. Dette forbedrer luftstrømmen og estetikken.

4. Bruksanvisning

4.1 Slå på/av

• To power on your PC, press the Makt knappen som ligger på topppanelet.
• To power off, either shut down through your operating system or press and hold the Makt knappen i noen sekunder.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• USB 3.0-port (x1): For høyhastighets dataoverføring.
• USB 2.0-porter (x2): For tilkobling av periferiutstyr.
• Mikrofonkontakt: For lydinngang.
• HD Audio Jack: For audio output (headphones/speakers).
• Tilbakestill-knapp: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Vedlikehold

Regelmessig vedlikehold bidrar til å sikre optimal ytelse og levetid for PC-komponentene dine.

5.1 Rengjøring av støvfilter

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Generell rengjøring

• Tørk av utsiden av dekselet med en myk klutamp klut. Unngå skurende rengjøringsmidler.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Feilsøking

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Ingen strøm: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Viftene spinner ikke/RGB fungerer ikke: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Overoppheting: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Frontpanelporter fungerer ikke: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Garanti og støtte

7.1 Garantiinformasjon

The AeroCool HEXFORMBKV2 PC case comes with a 2 års garanti for parts. Please retain your proof of purchase for warranty claims.

7.2 Teknisk støtte

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webnettstedet eller i produktemballasjen.

• AeroCool Official Webnettsted: www.aerocool.io
• E-post til kundestøtte: support@aerocool.io (Eksample, please verify on official webstedet)