Introduksjon
Takk for kjøpetasing the SZELAM Digital Alarm Clock. This manual provides detailed instructions for setting up and operating your new alarm clock. Please read it thoroughly to ensure proper use and to maximize the features of your device.
Produkt overview
Nøkkelfunksjoner:
- Large 14cm LED Display: High-resolution display clearly shows time, date, and temperature. HD white LED digits ensure visibility from a distance.
- Justerbar lysstyrke: 6 levels of brightness (5% to 100%) to suit various lighting conditions.
- 8 Alarm Ringtones: Choose from 8 distinct alarm tones.
- Justerbart alarmvolum: 6 volume levels, ranging from 30 to 90 dB.
- Snooze-funksjon: Provides an additional 9 minutes of sleep after the alarm sounds.
- 12/24-timers format: Switch between 12-hour (AM/PM) and 24-hour time displays.
- Date and Temperature Display: Shows current date and indoor temperature.
- USB Powered with Battery Backup: Operates via USB cable; 3 AAA batteries (not included) provide memory function for settings during power outages.
Pakkeinnhold:
- 1 x SZELAM Digital Alarm Clock
- 1 x USB-ladekabel
- 1 x brukerhåndbok
Bilde: Front view of the SZELAM Digital Alarm Clock displaying time, date, and temperature.
Bilde: Graphic illustrating key features: 5.5" LED Display, Alarm Setting, Snooze Mode, 6-Level Brightness, 6-Level Volume, 8 Alarm Ringtones, Calendar Display, Temperature Display, Plug in / Battery operation.
Oppsett
Powering the Clock:
- Koble til USB-strøm: Insert the provided USB cable into the clock's USB port and connect the other end to a USB power adapter (not included) or a powered USB port. The clock will power on and the display will illuminate.
- Installer reservebatterier (valgfritt, men anbefalt): Open the battery compartment on the back of the clock. Insert 3 new AAA batteries (not included), ensuring correct polarity (+/-). These batteries will preserve your time and alarm settings in case of a power outage. Note: The clock display will not remain continuously lit when operating solely on battery power. The display will turn off after 10 seconds to conserve energy; press any button to temporarily illuminate it. For continuous display, USB power is required.
Bilde: Illustration showing the alarm clock powered by a USB cable for continuous display and a note about battery backup for memory function only.
Bruksanvisning
Refer to the back panel diagram for button locations.
Bilde: Bak view of the alarm clock, highlighting the USB port, 6 Levels Volume switch, Alarm/Time Setting buttons, Alarm Sounds Switch, °C/°F switch, and 12/24H switch, and 6 Levels Brightness switch.
1. Stille inn tid og dato:
- Trykk og hold inne "SETT" button (located on the back) until the hour digits flash.
- Bruk "UP" or "DOWN" knapper for å justere timen.
- Pressen "SETT" again to move to minute setting, then use "UP" or "DOWN" for å justere minuttene.
- Fortsett å trykke "SETT" for å bla gjennom innstillinger for år, måned og dag, og justere hver med "UP" or "DOWN".
- Pressen "SETT" one last time or wait a few seconds for the settings to save automatically.
2. Switching 12/24 Hour Format:
- Finn "12/24H" bryteren på baksiden av klokken.
- Slide the switch to select either 12-hour (with AM/PM indicator) or 24-hour format.
3. Stille inn alarmen:
- Trykk på "ALARM" button (located on the back) once. The alarm time will appear, and the hour digits will flash.
- Bruk "UP" or "DOWN" knapper for å justere alarmtiden.
- Pressen "ALARM" again to move to minute setting, then use "UP" or "DOWN" to adjust alarm minutes.
- Pressen "ALARM" one last time or wait a few seconds to save the alarm setting.
- For å aktivere/deaktivere alarmen, trykk på "ALARM" button briefly. An alarm icon (bell symbol) will appear on the display when the alarm is active.
4. Adjusting Alarm Volume:
- Finn "6 Levels Volume" bryteren på baksiden av klokken.
- Slide the switch to your desired volume level (L1 to L6).
Bilde: A family enjoying the alarm clock, illustrating the 8 pleasant alarm bells feature and volume adjustment levels.
5. Selecting Alarm Ringtones:
- Finn "Alarm Sounds Switch" på baksiden av klokken.
- Slide the switch to cycle through the 8 available alarm tones. Select your preferred tone.
6. Using the Snooze Function:
- Når alarmen går, trykker du på den store "SNOOZE" button on the top of the clock.
- The alarm will pause for 9 minutes and then sound again.
- To turn off the alarm completely, press any other button on the back of the clock.
7. Justering av skjermens lysstyrke:
- Finn "6 Levels Brightness" bryteren på baksiden av klokken.
- Slide the switch to cycle through the 6 brightness levels (from 5% to 100%).
- The clock also features an automatic dimming function between 6 PM and 7 AM. You can adjust the brightness during these hours, and the setting will be saved for the night mode.
Bilde: A series of six alarm clock displays showing the different brightness levels from dimmest to brightest.
8. Temperaturdisplay:
- The clock displays the indoor temperature by default.
- To switch between Celsius (°C) and Fahrenheit (°F), locate the "°C/°F" switch on the back of the clock and slide it to your desired unit.
Vedlikehold
- Rengjøring: Tørk av klokken med en myk, tørr klut. Ikke bruk slipende rengjøringsmidler eller løsemidler.
- Batteribytte: If using backup batteries, replace them annually or when the clock fails to retain settings during a power interruption. Ensure correct polarity when inserting new batteries.
- Lagring: Hvis klokken skal oppbevares over lengre tid, må du ta ut AAA-batteriene for å forhindre lekkasje.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Display is off or flickering. | No USB power; loose USB connection; batteries depleted (if running on battery only). | Ensure USB cable is securely connected to a working power source. If using batteries, replace them. Remember, continuous display requires USB power. |
| Clock does not keep correct time. | Incorrect time setting; backup batteries depleted or not installed. | Re-set the time following the "Setting Time and Date" instructions. Ensure fresh AAA batteries are installed for backup. |
| Alarmen lyder ikke. | Alarm ikke aktivert; alarmvolumet er for lavt; feil alarmtid er angitt. | Verify the alarm icon is visible on the display. Adjust alarm volume using the switch. Check and re-set the alarm time. |
| Snooze-funksjonen fungerer ikke. | Snooze button not pressed correctly. | Ensure you press the large "SNOOZE" button on top when the alarm sounds. Pressing other buttons will turn off the alarm. |
| Skjermen er for lys eller for svak. | Lysstyrkenivået må justeres. | Adjust the "6 Levels Brightness" switch on the back of the clock to your preferred level. |
Spesifikasjoner
| Merke: | SZELAM |
| Modell: | Digital vekkerklokke |
| Farge: | Hvit |
| Visningstype: | Digital LED |
| Produktdimensjoner (L x B x H): | 13.31 x 3.81 x 9.3 cm (5.24 x XUMX x 1.5 inches) |
| Varevekt: | 200 gram |
| Strømkilde: | USB Powered (for continuous display), 3x AAA Batteries (for memory backup only, not included) |
| Spesielle funksjoner: | Temperature Display, Alarm, Snooze, Adjustable Brightness, Adjustable Volume, 12/24H Format |
Bilde: Diagram showing the approximate visual dimensions of the SZELAM Digital Alarm Clock, including display size and overall width.
Garanti og støtte
Your SZELAM Digital Alarm Clock comes with a 1 års garanti from the date of purchase. We also offer a 30-day unconditional refund/exchange policy.
If you encounter any issues or have questions regarding your product, please contact our customer support team via email. We aim to provide solutions within 24 hours.
For further assistance, please refer to the contact information provided on the product packaging or the seller's page.
