OnLyee Projection Alarm Clock Model CR1001F User Manual

1. Produktet er overview

The OnLyee Projection Alarm Clock Model CR1001F is a versatile digital alarm clock designed to enhance your bedroom experience. It features an ultra-clear LED display, dual alarms with snooze, a 180° rotatable time projector, adjustable brightness for both the display and projection, a USB charging port, and battery backup for settings retention.

Image: OnLyee Projection Alarm Clock with time projected and a phone charging.

2. Pakkens innhold

Når du åpner pakken, må du sørge for at alle varene er til stede:

• OnLyee Projection Alarm Clock
• Strømadapter
• Brukerhåndbok (dette dokumentet)

Image: The alarm clock with its power adapter and user manual.

3. Produktdiagram

Familiarize yourself with the buttons and ports on your alarm clock for easy operation.

Image: Back and top view of the alarm clock with labeled buttons and ports.

1. SET TIME / 12/24H Button: Set time, switch 12/24 hour format.
2. TIME-knapp: Adjust hour during time setting.
3. MIN-knapp: Adjust minute during time setting.
4. DIMMER-knapp: Juster skjermens lysstyrke.
5. DST-knapp: Activate/deactivate Daylight Saving Time.
6. SNOOZE OK/* Button: Snooze alarm, confirm settings, adjust projection brightness.
7. ALARM1 / ALARM2 Buttons: Set Alarm 1 and Alarm 2.
8. ALARM ON/PAUSE Button: Turn alarm on/off.
9. PROJECTION ON/OFF Button: Turn projection on/off.
10. PROJECTION DIMMER: Adjust projection brightness.
11. ROTATE CLARITY: Focus ring for projection.
12. USB-ladeport: For lading av eksterne enheter.
13. DC-jack: Strøminngang.
14. Batterirom: For backup batteries.

4. Oppsett

4.1 Strømtilkobling

Connect the provided AC power adapter (100-240V) to the DC Jack on the back of the alarm clock. Plug the adapter into a standard wall outlet. The display will illuminate.

4.2 Batteribackup

Install 2 AAA batteries (not included) into the battery compartment on the bottom of the clock. These batteries serve as a backup for your time and alarm settings during a power outage. The display will go blank during a power outage, but the alarm settings will be retained and the alarm will still sound.

Image: Illustration of battery backup functionality during power loss.

5. Grunnleggende operasjoner

5.1 Setting Time (12/24H Format)

1. Trykk lenge på SET TIME / 12/24H -knappen for å gå inn i tidsinnstillingsmodus. Timetallene vil blinke.
2. Trykk på TIME for å justere timen.
3. Trykk på MIN for å justere minutt.
4. Trykk kort på SET TIME / 12/24H button to switch between 12-hour and 24-hour display formats.
5. Trykk på SET TIME / 12/24H button again to confirm and exit time setting.

5.2 Sommertid (DST)

Trykk kort på DST button to activate or deactivate Daylight Saving Time. The display will adjust by one hour accordingly.

5.3 Display Brightness (5-Level Dimmer)

Trykk kort på MØRKERE button to cycle through 5 levels of display brightness (100%, 75%, 50%, 25%, 5%). Choose the level that suits your preference.

Image: Visual representation of the 5-level adjustable display brightness.

6. Alarmfunksjoner

6.1 Innstilling av doble alarmer

The clock supports two independent alarms (ALARM1 and ALARM2).

1. Langt trykk ALARM1 or ALARM2 button to enter alarm setting mode. The hour digits will flash.
2. Trykk på TIME -knappen for å justere alarmtiden.
3. Trykk på MIN for å justere alarmminuttet.
4. Pressen ALARM1 or ALARM2 again to confirm and exit alarm setting.

6.2 Aktivere/deaktivere alarmer

Trykk kort på ALARM PÅ/PAUSE button to toggle Alarm 1 or Alarm 2 on/off. An alarm icon will appear on the display when active.

6.3 Slumrefunksjon

When an alarm sounds, short press the large SNOOZE OK/* button on top to activate snooze. The alarm will pause for 9 minutes and then sound again.

Image: Using the snooze function for an additional 9 minutes of sleep.

6.4 Alarmvolum

The alarm volume can be adjusted. Refer to the product diagram for the volume control buttons, typically located on the side or back. There are 5 adjustable volume levels.

Video: Demonstrates setting the alarm volume on a similar projection clock.

7. Projection Features

The OnLyee Projection Alarm Clock allows you to project the time onto your ceiling or wall.

7.1 Activating Projection

Trykk kort på PROJEKSJON PÅ/AV button to turn the projection on or off.

7.2 Adjusting Projection Angle

The projector can be rotated 180° to direct the time display to your desired surface (ceiling or wall).

Image: The alarm clock projecting time on a wall, highlighting the 180° flip feature.

7.3 Adjusting Projection Clarity (Focus Ring)

Roter ROTATE CLARITY ring on the projector to achieve a clear and sharp time image on the projection surface. The optimal projection distance is 1.64-11.4 feet (0.5-3 meters).

7.4 Projeksjonslysstyrke

Trykk kort på SNOOZE OK/* button to adjust the projection brightness. There are 5 levels of brightness for the projected time.

Video: Demonstrates the projection feature and how the time is displayed on the wall or ceiling.

8. USB -ladeport

The alarm clock includes a USB charging port (5V/1A) on the back. You can use this port to charge your mobile phone, tablet, or other electronic devices, eliminating the need for an extra wall adapter.

Image: A smartphone connected to the alarm clock's USB port for charging.

9. Vedlikehold og omsorg

• Rengjør klokken med en myk, tørr klut. Ikke bruk slipende rengjøringsmidler eller løsemidler.
• Hold enheten unna vann og høy luftfuktighet.
• Unngå å utsette klokken for direkte sollys eller ekstreme temperaturer.
• Ensure the projector lens is clean for optimal clarity.

10. Feilsøking

No display/Clock not turning on:

Ensure the power adapter is securely connected to the clock and a working power outlet.

Projection is blurry:

Adjust the 'ROTATE CLARITY' focus ring on the projector until the image is sharp.

Alarmen går ikke:

Check if Alarm 1 or Alarm 2 is activated (icon visible on display). Ensure the alarm volume is not set to minimum.

Innstillinger tapt etter strømbruddtage:

Verify that 2 AAA backup batteries are correctly installed in the battery compartment.

11. Spesifikasjoner

Image: Product dimensions of the alarm clock.

12. Garanti og støtte

OnLyee provides a one-year warranty for this product. For any issues or support needs, please refer to the contact information provided in your product packaging or visit the official OnLyee website. We offer 30 days unconditional refund/exchange and 24-hour response for customer inquiries.