FLYLINKTECH CF700

FLYLINKTECH 2500A Peak 24000mAh Car Jump Starter with Air Compressor (Model CF700) Instruction Manual

Modell: CF700

Introduksjon

Thank you for choosing the FLYLINKTECH Car Jump Starter with Air Compressor. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and LED light source. Please read this manual thoroughly before use to ensure safe and optimal operation.

Produkt overview

The FLYLINKTECH CF700 is a multi-functional device combining a powerful jump starter, a 150 PSI air compressor, a 24000mAh power bank, and an emergency LED light. It is suitable for all gas engines and diesel engines up to 8.0L.

FLYLINKTECH Jump Starter with Air Compressor and accessories in a carrying case

Figure 1: What's in the Box - The jump starter unit, smart jumper cables, air hose with various nozzles, USB charging cable, and carrying case.

Nøkkelfunksjoner

  • Battery Starter: 2500A peak current, 1200A starting current, capable of starting all gas and 8.0L diesel engines.
  • Power Bank: 24000mAh capacity with 2 USB outputs (one Quick Charge) and a DC 12-16.8V / 10A port for charging various devices and car accessories.
  • Tire Compressor: Powerful 150 PSI inflator with a digital display for setting desired pressure and automatic shut-off. Includes pins for inflating balls, rubber boats, and mats.
  • Nødlys med LED: 5W bright LED light with multiple modes (stable, SOS, strobe) for emergency situations, night breakdowns, or repairs.
  • 12V stikkontakt: Connects various car accessories such as additional USB chargers or car fans.
  • Smart beskyttelsessystem: Features short circuit protection, high/low temperature protection, reverse connection protection, surge voltage beskyttelse, høy voltage protection, and over discharge protection.
FLYLINKTECH Portable Jump Starter with icons for Battery Starter, 150PSI, Power Bank, LED Light, Preset, Tire Compressor

Figur 2: Overview of the multi-functional features of the device.

Sikkerhetsinformasjon

Always follow these safety guidelines to prevent injury or damage to the device and vehicle:

  • Les alle instruksjonene før du bruker produktet.
  • Ikke senk produktet i vann.
  • Ikke bruk produktet i eksplosive atmosfærer, for eksempel i nærvær av brennbare væsker, gasser eller støv.
  • Oppbevares utilgjengelig for barn.
  • Ensure proper polarity connection when jump-starting to avoid sparks and damage. The smart clamp provides protection against reverse connection.
  • Do not touch the air hose connector immediately after prolonged inflation, as it may be hot.
FLYLINKTECH Jump Starter Smart Protection System with icons for Short Circuit, High Temperature, Reverse Connection, Low Temperature, Surge Voltage, høy voltage, Over Discharge Protection

Figure 3: The device incorporates multiple safety protections for user and vehicle safety.

Oppsett

Lader enheten

Before first use, fully charge the jump starter. Use the provided USB-C charging cable to connect the device to a compatible USB power adapter (not included). The digital display will indicate the charging status. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.

Bruksanvisning

1. Hoppstart av et kjøretøy

  1. Ensure the jump starter is sufficiently charged.
  2. Connect the smart jumper cables to the jump starter's jumping port.
  3. Fest den røde clamp til den positive (+) polen på kjøretøyets batteri.
  4. Fest den svarte clamp to the negative (-) terminal of the vehicle's battery. The smart clamp will indicate a safe connection (e.g., green light).
  5. Start kjøretøyets motor.
  6. Når motoren starter, fjern umiddelbart klampen.amps from the battery, then disconnect the smart jumper cables from the jump starter.
FLYLINKTECH Jump Starter connected to a car battery with jumper cables, showing 'Jump Start Your Car in Seconds'

Figure 4: Proper connection for jump starting a vehicle.

Video 1: Demonstration of jump starting a vehicle using a similar device. The video shows connecting the clamps to the battery and starting the car.

2. Dekkfylling

  1. Screw the air hose into the designated port on the jump starter.
  2. Attach the air hose nozzle securely to the tire valve stem.
  3. Turn on the device and select the desired pressure unit (PSI, BAR, KPA).
  4. Bruk knappene '+' og '-' for å stille inn ønsket dekktrykk.
  5. Trykk på startknappen for å starte oppblåsingen. Kompressoren stopper automatisk når det forhåndsinnstilte trykket er nådd.
  6. Disconnect the air hose from the tire valve and then from the jump starter.
FLYLINKTECH Jump Starter inflating a car tire, showing '150PSI Powerful Tire Inflator'

Figure 5: The device connected to a car tire for inflation.

Video 2: A seller demonstration of the car jump starter's air compressor function, showing how to connect and inflate a tire.

3. Bruk som powerbank

Connect your electronic devices (phones, tablets, etc.) to the USB output ports or car accessories to the DC 12-16.8V / 10A port for charging.

FLYLINKTECH Jump Starter charging a laptop and phone, showing '24000mAh Portable Power Bank'

Figure 6: The device being used to charge multiple electronic devices.

4. Bruk av LED-lyset

Press and hold the light button to turn on the LED light. Short presses will cycle through different modes: stable light, SOS signal, and strobe light. Press and hold again to turn off.

FLYLINKTECH Jump Starter with bright emergency LED light, showing 'Emergency Light'

Figure 7: The device's LED light providing illumination in a dark setting.

Vedlikehold

  • Hold enheten ren og tørr.
  • Oppbevares kjølig og tørt, unna direkte sollys og høye temperaturer.
  • Recharge the device at least once every 3-6 months to prevent deep discharge and prolong battery life.
  • Inspiser kabler og tilbehør for skader før hver bruk.

Feilsøking

ProblemMulig årsakLøsning
Device does not turn on/chargeBattery completely depleted or charging cable/adapter faulty.Ensure charging cable and adapter are working. Try a different charging source. Allow sufficient time for initial charge.
Vehicle does not jump startFeil clamp connection, insufficient device charge, or vehicle battery severely damaged.Sjekk klamp polarity and ensure secure connection. Fully charge the jump starter. Consult a mechanic if vehicle battery is beyond jump-starting.
Luftkompressoren blåser seg ikke oppAir hose not securely attached, incorrect pressure setting, or device not powered on.Ensure air hose is tightly screwed in and nozzle is secure on valve. Verify pressure setting and device power.
Air compressor stops prematurelyPreset pressure reached (automatic shut-off).This is normal operation. Check the current tire pressure.

Spesifikasjoner

  • Merke: FLYLINKTECH
  • Modell: CF700
  • Toppstrøm: 2500A
  • Startstrøm: 1200A
  • Batterikapasitet: 24000mAh
  • Type kjøretøyservice: Passenger Car (All Gas or 8.0L Diesel)
  • Air Compressor Pressure: 150 PSI
  • USB-utgang: 2 ports (one Quick Charge)
  • DC-utgang: 12-16.8V / 10A
  • Varevekt: 5.74 pund
  • Produktdimensjoner: 8.66 x 6.69 x 3.35 tommer
  • Battericellesammensetning: Litiumion
  • Voltage: 12 volt

Garanti og støtte

Dette produktet kommer med en 24-Months Global Warranty. FLYLINKTECH is committed to providing Life Time After-sale Service & Technical Support. For any inquiries or assistance, please contact FLYLINKTECH customer service.

© 2026 FLYLINKTECH. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.