Progress Lighting P500370-31M-30

Progress Lighting Inverse Collection 30-inch LED Pendant Instruction Manual

Model: P500370-31M-30

Brand: Progress Lighting

1. Viktig sikkerhetsinformasjon

Please read and understand all instructions carefully before beginning assembly and installation. Failure to do so could lead to electric shock, fire, or other injuries that could be fatal or cause serious damage.

  • Always disconnect power at the main circuit breaker panel before starting installation.
  • Alle elektriske tilkoblinger må være i samsvar med lokale forskrifter, forordninger og National Electric Code (NEC).
  • Kontakt en kvalifisert elektriker hvis du er usikker på kablingen eller installasjonsprosedyrene.
  • This fixture is designed for indoor use in damp steder.
  • Ikke forsøk å endre armaturen på noen måte.

2. Produktet er overview

The Progress Lighting Inverse Collection LED Pendant features a minimalist design with a matte black halo suspended by cables. It provides indirect illumination from integrated LED light sources, creating a gentle glow. This fixture is suitable for modern, mid-century modern, and contemporary interiors.

Nøkkelfunksjoner:

  • Moderne design: A simple halo design with airy cables, ideal for living rooms, great rooms, and dining rooms.
  • Matt svart finish: Elegant matte black finish that reflects light from its circular silhouette.
  • Integrert LED: Provides indirect illumination with a 27W integrated LED light source (90 CRI, 3000K).
  • Dimbar: This fixture is dimmable when used with a compatible wall dimmer.
  • Sertifiseringer: cCSAus Damp Location Listed.
Progress Lighting Inverse Collection 30-inch LED Pendant in Matte Black
Figure 2.1: The Progress Lighting Inverse Collection 30-inch LED Pendant, showcasing its matte black finish and minimalist halo design.
Progress Lighting Inverse Collection 30-inch LED Pendant installed in a modern living room
Figure 2.2: The pendant light installed in a modern living room, demonstrating its aesthetic appeal and how it complements contemporary interiors.

3. Pakkens innhold

Verify that all parts listed below are included in your package. If any parts are missing or damaged, contact customer service immediately.

Diagram of package contents for Progress Lighting P500369 and P500370 LED Pendants
Figure 3.1: Illustration of the fixture (A) and hardware contents (AA, BB, CC) included in the package for models P500369 and P500370.

Armaturkomponenter:

DelBeskrivelseQuantity (P500370)
AArmatur1

Hardware Contents (not actual size):

DelBeskrivelseMengde
AASkruerAntall: 2
BBWire MuttersAntall: 3
CCMonteringsbrakettAntall: 1

4. Spesifikasjoner

AttributtDetalj
ModellnavnInverse LED
DelenummerP500370-31M-30
MerkeFremdriftsbelysning
FargeMatt svart
MaterialeAluminium
Lysarmatur FormAnheng
RomtypeDining Room, Living Room
Innendørs/utendørs brukInnendørs
StrømkildeElektrisk med ledning
InstallasjonstypeSemi Flush Mount
KontrollmetodeApp (Note: This may refer to smart dimmer compatibility, not direct app control of the fixture itself)
LyskildetypeLED (integrert)
Finish TypeMatt svart
SkyggematerialeMetall
Antall lyskilder1
Voltage120 volt
Lys fargeVarm hvit
Inkluderte komponenterProdukt- og installasjonsark
BelysningsmetodeLED
Spesifikasjon oppfyltCSA
Wattage35 watt
KontrollertypePush Button (likely referring to compatible wall dimmers)
BrytertypeDimmer (compatible)
Lysstyrke2364 lumen
Effektivitet87.56 lumen/watt
MonteringstypeTakfeste
Montering påkrevdJa
Fargetemperatur3000 Kelvin
UPC785247262304
Varevekt7.28 pund
Skjærediameter30 tommer
Sammensatt diameter30 tommer
Dimensions of the Progress Lighting Inverse Collection 30-inch LED Pendant
Figure 4.1: The pendant has a 30-inch diameter and a 2.4-inch height. Overall height with cables is 100 inches.
LED specifications: 90 CRI, 3000K
Figure 4.2: The integrated LED provides 90 CRI (Color Rendering Index) and a color temperature of 3000 Kelvin (warm white light).

5. Oppsett og installasjon

This section provides general guidance for installing your pendant light. Always refer to the detailed installation sheet included with your product for specific instructions and diagrams.

Forhåndsinstallasjon:

  1. Slå av strømmen: Before starting, ensure the power is turned off at the circuit breaker to prevent electrical shock.
  2. Pakk ut innholdet: Carefully unpack all components and check against the 'Package Contents' section to ensure everything is present and undamaged.
  3. Nødvendig verktøy: Samle nødvendige verktøy (f.eks. skrutrekker, avisoleringstang, elektrisk tape, stige).

Montering av armaturet:

  1. Attach the mounting bracket (CC) to the junction box in the ceiling using the provided screws (AA).
  2. Adjust the length of the suspension cables to achieve the desired hanging height.
  3. Make electrical connections: Connect the fixture's wires to the house wires according to local electrical codes, securing with wire nuts (BB).
  4. Stikk alle ledninger forsiktig inn i koblingsboksen.
  5. Secure the fixture canopy to the mounting bracket.

Pendant Placement Guidelines:

Consider the following guidelines for optimal pendant placement over dining tables, kitchen islands, or nightstands.

Pendant spacing guidelines for kitchen islands
Figure 5.1: For kitchen islands, pendants should be spaced approximately 24 inches apart, and the bottom of the pendant should hang 30-36 inches above the counter. Ensure at least 12 inches from the island edge.
Pendant height guideline for bedside tables
Figure 5.2: When installing pendants on either side of a bed, the bottom of the pendant should typically hang 55-60 inches from the floor.
Video 5.1: This video from Progress Lighting discusses modern pendant light trends, including versatile placement options for various rooms and tips for grouping pendants to create custom arrangements or chandeliers.

6. Bruksanvisning

Once installed, your Progress Lighting Inverse Collection LED Pendant is ready for use.

  • Strøm på: Gjenopprett strømmen ved hovedsikringen.
  • Standard drift: The integrated LED light will illuminate when the wall switch is turned on.
  • Dimming funksjonalitet: This fixture is designed to be dimmable. For optimal performance, use with a compatible LED dimmer switch. Refer to the dimmer manufacturer's instructions for proper installation and operation.
Integrated LED and dimming information graphic
Figure 6.1: This graphic indicates that no bulbs are required due to the integrated LED, and the fixture is dimmable with a compatible wall dimmer.

7. Vedlikehold

Proper care and maintenance will ensure the longevity and appearance of your lighting fixture.

  • Rengjøring: Slå alltid av strømmen før rengjøring. Bruk en myk, tørr eller lett fuktet klut.amp cloth to wipe the fixture. Avoid using harsh chemicals, abrasive cleaners, or polishes as they may damage the finish.
  • Ingen pærebytte: Since this fixture uses integrated LED technology, there are no bulbs to replace. The LED light source is designed for long-term use.

8. Feilsøking

Hvis du opplever problemer med pendellampen din, kan du se følgende vanlige feilsøkingstrinn:

  • Lyset slår seg ikke på:
    • Sjekk at strømmen er på ved sikringsbryteren.
    • Sørg for at alle elektriske tilkoblinger er sikre.
    • Verify the wall switch is in the 'ON' position.
  • Lyset flimrer eller dimmes ikke riktig:
    • Ensure you are using a compatible LED dimmer switch. Incompatible dimmers can cause flickering or poor dimming performance.
    • Se etter løse ledningsforbindelser.
  • Synlig skade: If the fixture appears physically damaged, discontinue use and contact customer support.

If these steps do not resolve the issue, contact Progress Lighting customer service for further assistance.

9. Garantiinformasjon

This Progress Lighting fixture is covered by a 5 års begrenset garanti. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use and service. For full terms and conditions, please refer to the warranty documentation included with your product or contact customer support.

10. Kundestøtte

For questions regarding product information, assembly, missing parts, or any other support needs, please contact Progress Lighting customer service:

You can also visit the official Progress Lighting website for additional resources and product information.