Optex 990047 Indoor/Outdoor Wireless Digital Thermometer User Manual

Introduksjon

Thank you for choosing the Optex 990047 Indoor/Outdoor Wireless Digital Thermometer. This device provides accurate temperature readings for both your indoor environment and an outdoor location via a wireless sensor. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your thermometer.

Pakkeinnhold

• 1 x Optex 990047 Main Display Unit
• 1 x trådløs utendørssensor
• 1 x brukerhåndbok
• (Batteries not included, typically requires AAA or AA batteries for both units)

Produkt overview

Familiarize yourself with the components of your Optex thermometer.

Main Display Unit (Front)

Bilde: Front view of the Optex 990047 main display unit. The digital screen shows indoor and outdoor temperatures, along with high/low records and trend indicators. Below the screen are three buttons: 'CH', '°C/°F', and 'CLEAR'.

• Digital skjerm: Shows indoor temperature (top) and outdoor temperature (bottom), along with HI/LO records and temperature trend arrows.
• CH-knapp: Selects the wireless channel (if multiple sensors are used) or initiates sensor search.
• °C/°F-knapp: Veksler mellom temperaturenhetene Celsius og Fahrenheit.
• CLEAR-knapp: Clears the recorded HI/LO temperatures.

Main Display Unit (Back)

Bilde: Tilbake view of the Optex 990047 main display unit. It features a battery compartment cover and an integrated kickstand for tabletop placement, as well as a hanging hole.

• Batterirom: Houses the batteries for the main unit.
• Støtte: Lar enheten stå oppreist på en flat overflate.
• Hull for veggmontering: For hanging the unit on a wall.

Trådløs utendørs sensor

Bilde: Front view of the Optex wireless outdoor temperature sensor. It has a small digital display showing the current temperature and channel, along with a red indicator light and a battery compartment on the back.

• Temperatursensor: Measures the outdoor temperature.
• Overføringsindikator: A small LED light that flashes when data is transmitted.
• Batterirom: Houses the batteries for the outdoor sensor.
• Kanalbytte: (Typically inside the battery compartment) Allows selection of a specific channel (1, 2, or 3) if using multiple sensors.

Oppsett

1. Install Batteries in the Outdoor Sensor:
   • Åpne batterirommet på baksiden av den trådløse sensoren.
   • Insert 2 x AAA batteries (not included) according to the polarity markings (+/-).
   • Lukk batterirommet.
   • Note: If there is a channel switch inside the compartment, ensure it is set to Channel 1 for initial setup.
2. Install Batteries in the Main Display Unit:
   • Åpne batterirommet på baksiden av hovedskjermenheten.
   • Insert 2 x AAA batteries (not included) according to the polarity markings (+/-).
   • Lukk batterirommet.
   • The display will light up and begin searching for the outdoor sensor.
3. Pare sensoren:
   • Place the outdoor sensor and the main display unit close to each other during the initial setup.
   • The main unit should automatically detect and connect to the outdoor sensor within a few minutes. The outdoor temperature will appear on the display.
   • If the outdoor temperature does not appear, press and hold the "CH" button on the main unit for 3 seconds to initiate a manual search for the sensor.
4. Plassering av utesensoren:
   • Choose a shaded location for the outdoor sensor, away from direct sunlight and rain, to ensure accurate readings.
   • Avoid placing it near heat sources (e.g., vents, appliances) or metal objects that could interfere with the wireless signal.
   • The maximum wireless range is approximately 30 meters (100 feet) in open air. Walls and obstacles will reduce this range.

Operasjon

Reading Temperatures

The main display unit shows the indoor temperature at the top and the outdoor temperature (from the wireless sensor) at the bottom. Both displays show the current temperature, along with the recorded high (HI) and low (LO) temperatures for the day, and a trend indicator.

Enheter for veksling av temperatur (°C/°F)

Trykk på ° C / ° F button once to switch between Celsius and Fahrenheit temperature units.

Clearing HI/LO Records

The thermometer automatically records the highest and lowest temperatures since the last reset. To clear these records and start new ones, press the KLAR button once. The HI/LO values will reset to the current temperature.

Channel Selection (for multiple sensors)

If you are using multiple outdoor sensors (sold separately), you can switch between their readings by pressing the CH button. Each press will cycle through the available channels (e.g., CH1, CH2, CH3). Ensure each sensor is set to a unique channel via its internal switch.

Vedlikehold

• Rengjøring: Tørk av enhetene med en myk klutamp klut. Ikke bruk skurende rengjøringsmidler eller løsemidler.
• Batteribytte: Replace batteries in both the main unit and the outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones of the same type.
• Lagring: If storing the thermometer for an extended period, remove all batteries to prevent leakage. Store in a cool, dry place.

Feilsøking

Spesifikasjoner

• Modell: Optex 990047
• Visningstype: Digital LCD
• Innendørs temperaturområde: -10 °C til 50 °C (14 °F til 122 °F) (Estimated, based on typical indoor thermometers)
• Utetemperaturområde: -40 °C til 60 °C (-40 °F til 140 °F) (Estimated, based on typical outdoor sensors)
• Temperaturnøyaktighet: +/- 1 °C (+/- 2 °F) (Estimert)
• Trådløs rekkevidde: Opptil 30 meter (100 fot) i friluft (Estimert)
• Strømkilde (hovedenhet): 2 x AAA 1.5V-batterier (ikke inkludert)
• Strømkilde (utendørs sensor): 2 x AAA 1.5V-batterier (ikke inkludert)
• Materiale: Plast
• Farge: Svart

Sikkerhetsinformasjon

• Ikke utsett hovedenheten eller sensoren for ekstreme temperaturer, direkte sollys eller overdreven fuktighet.
• Do not immerse the units in water. The outdoor sensor is weather-resistant but not waterproof.
• Do not attempt to disassemble or repair the units. This will void the warranty.
• Kast gamle batterier på en ansvarlig måte i henhold til lokale forskrifter.
• Oppbevar batterier utilgjengelig for barn.

Garanti og støtte

Optex products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Optex webnettsted. Ha modellnummeret (990047) klart når du kontakter kundestøtte.