Sharp XL-BH250 Limited Edition 5-Disc Bluetooth Speaker System

Introduksjon

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sharp XL-BH250 Limited Edition 5-Disc Bluetooth Speaker System. This micro system offers a versatile audio experience with its 5-CD changer, digital player, AM/FM radio, USB input, and Bluetooth connectivity, all housed in a distinctive Champagne Gold and Carbon Fiber finish.

Please read this manual thoroughly before using the system to ensure proper operation and to maximize your listening enjoyment.

1. Oppsett

Follow these steps to set up your new audio system.

1.1 Utpakking

Fjern alle komponentene forsiktig fra emballasjen. Sørg for at alle elementene som er oppført nedenfor er til stede:

• Hovedenhet (mikrokomponentsystem)
• Venstre høyttaler
• Høyre høyttaler
• Fjernkontroll
• AM sløyfeantenne
• FM Wire-antenne
• Strømledning
• Brukerhåndbok (dette dokumentet)

Retain the original packaging for future transport or service needs.

1.2 Høyttalertilkobling

Connect the speaker wires from the main unit to the corresponding terminals on the back of each speaker. Ensure correct polarity (+ to + and - to -) for optimal sound quality.

The Sharp XL-BH250 system, showing the central unit with its 5-disc changer and control panel, flanked by two carbon fiber finish speakers. The main unit features a display showing "BLUETOOTH" and various control buttons and a volume knob.

1.3 Antennetilkobling

For AM reception, connect the supplied AM loop antenna to the AM antenna terminals on the rear of the main unit. For FM reception, connect the supplied FM wire antenna to the FM antenna terminal. Extend the FM wire antenna fully for best reception.

1.4 Strømtilkobling

Plug the power cord into the AC inlet on the rear of the main unit, then plug the other end into a standard AC wall outlet (120V AC, 60Hz).

1.5 Første gangs strøm på

Trykk på PÅ VENT button on the front panel or the remote control to turn on the system. The display will illuminate.

2. Bruksanvisning

2.1 Strøm på/av

Trykk på PÅ VENT button to toggle the system between On and Standby modes. In Standby mode, the system consumes minimal power.

2.2 Kildevalg

Trykk på FUNKSJON button on the front panel or remote control repeatedly to cycle through available input sources: CD, Bluetooth, USB, AM, FM, and AUDIO IN.

Detail of the Sharp XL-BH250's central control panel, highlighting the display, disc indicators, and primary function buttons for source selection and playback.

2.3 CD-avspilling

1. Trykk på FUNKSJON -knappen for å velge CD-kilde.
2. Trykk på ÅPNE/LUKK button (if available, or refer to disc slot) to open the CD tray.
3. Place up to five CDs into the disc slots. Ensure the discs are placed correctly with the label side facing up.
4. Pressen SPILL AV/PAUSE (►/‖) for å starte avspillingen.
5. Bruk SKIP (◀◀/►►) knapper for å navigere mellom spor.
6. Pressen STOPP (■) for å stoppe avspillingen.

The system supports CD-RW, CD-R, WMA, and MP3 playback formats.

2.4 Bluetooth-tilkobling

The system allows wireless audio streaming from Bluetooth-enabled devices.

1. Trykk på FUNKSJON button to select the Bluetooth source. The display will show "BLUETOOTH" and begin searching for devices.
2. Aktiver Bluetooth på Bluetooth-enheten din (smarttelefon, nettbrett osv.) og søk etter tilgjengelige enheter.
3. Select "SHARP XL-BH250" from the list of found devices.
4. Once paired, the system will confirm the connection, and you can begin streaming audio.
5. For devices with NFC, simply tap the device to the NFC touchpoint on the system to initiate pairing.

2.5 USB-avspilling

Connect a USB flash drive containing MP3 or WMA audio files to the USB port on the front of the main unit. Select the USB source using the FUNKSJON button. Playback will begin automatically or can be controlled using the playback buttons.

2.6 AM/FM-radio

1. Trykk på FUNKSJON button to select AM or FM radio.
2. Bruk TUNING buttons (often combined with skip buttons) to manually tune to a station.
3. To auto-scan and store presets, refer to the detailed instructions in the full manual (not provided here, but common functionality). The system supports 40 presets.

2.7 Audio In / Headphone Out

• LYD INN: Connect external audio devices (e.g., turntable with pre-amp, MP3 player) to the AUDIO IN jacks on the front panel using a 3.5mm stereo cable. Select the AUDIO IN source.
• TELEFON: Connect headphones to the PHONES jack on the front panel for private listening. Speaker output will be muted automatically.

2.8 Volumkontroll

Roter VOLUM knotten på frontpanelet eller bruk VOLUM +/- knappene på fjernkontrollen for å justere lydnivået.

3. Vedlikehold

Proper care ensures the longevity and performance of your audio system.

3.1 Rengjøring av enheten

Wipe the main unit and speakers with a soft, dry cloth. For stubborn stains, dampen the cloth slightly with water or a mild, non-abrasive cleaner. Do not use strong solvents like alcohol, benzene, or thinner, as they may damage the finish.

3.2 Stell av CD-linser

Avoid touching the CD lens inside the disc tray. If the lens becomes dirty, use a commercially available CD lens cleaner disc. Do not attempt to clean the lens manually.

3.3 Speaker Care

Keep the speaker grilles free from dust. Do not press on the speaker cones, as this can cause damage.

4. Feilsøking

Hvis du støter på problemer med systemet ditt, kan du se følgende vanlige problemer og løsninger.

Hvis problemet vedvarer etter at du har prøvd disse løsningene, kan du kontakte Sharps kundestøtte.

5. Spesifikasjoner

Key technical specifications for the Sharp XL-BH250 Micro Component System.

• Modellnummer: XL-BH250(GL)
• Produktdimensjoner (B x D x H): 6.9 x 12.4 x 9.5 tommer (hovedenhet)
• Varevekt: 15.73 pund
• Tilkoblingsteknologi: Bluetooth, USB, NFC
• Høyttalertype: Stereo
• CD-veksler: 5-plate
• Støttede avspillingsformater: CD-RW, CD-R, WMA, MP3
• Tuner: Digital AM/FM med 40 forhåndsinnstillinger
• Innganger: Audio Line-in, USB
• Utganger: Hodetelefoner

6. Garanti og støtte

Sharp products are designed for reliability and performance. This product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharp webnettstedet.

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Sharp customer support. Contact information can typically be found on the Sharp webnettstedet eller i produktemballasjen.

Du kan også besøke Sharp-butikken på Amazon for ytterligere produktinformasjon og støtteressurser.