Weiser Prescott/Katella Handleset Minus Deadbolt (Model: 9GLA77710-010)

Weiser Prescott/Katella sateng nikkel håndtak (låsebolt ikke inkludert) - bruksanvisning

Modell: 9GLA77710-010

1. Produktet er overview

The Weiser Prescott/Katella Handleset in Satin Nickel offers a blend of modern design and reliable functionality for exterior doors. This handleset is designed for keyed entry and security, but it does not include a deadbolt. It is intended to be paired with a separate Weiser deadbolt, which can be electronic or mechanical, allowing for personalized security solutions.

Weiser Prescott/Katella Satin Nickel Handleset, exterior view

Figur 1: Utvendig view of the Weiser Prescott/Katella Satin Nickel Handleset.

The handleset is reversible, accommodating both left-handed and right-handed door configurations. Its satin nickel finish provides a clean and contemporary aesthetic, complementing various home decors.

2. Hva er i esken

Sørg for at alle komponenter er til stede før installasjonen starter:

  • Door Handle (Exterior)
  • Lever (Interior)
  • Låser
  • streiker
  • Hardware (screws, pins, etc.)
Weiser Prescott/Katella Handleset installed on a wooden door, showing the exterior handle and keyhole

Figure 2: Weiser Prescott/Katella Handleset on a door, ready for a separate deadbolt installation.

3. Installasjon

3.1. Door Specifications & Preparation

Before installation, verify your door meets the following specifications:

  • Dørtykkelse: 1-3/8" to 1-3/4"
  • Latch Backset: 2-3/8" to 2-3/4"
  • Kryssboring: 2-1/8"

This handleset is designed for easy installation with basic tools, typically a screwdriver. No additional holes are required if your door is pre-drilled to standard specifications.

Person using a screwdriver to install a door handle, showing the internal mechanism

Figure 3: Illustrative image of door handle installation using a screwdriver.

3.2. Installasjonstrinn

Follow these general steps for installing your handleset. Refer to the detailed video for visual guidance.

  1. Monter låsen i dørkanten.
  2. Install the exterior handle assembly, ensuring the spindle aligns with the latch.
  3. Install the interior lever, aligning it with the exterior assembly.
  4. Fest alle komponenter med de medfølgende skruene.
  5. Monter sluttstykket på dørkarmen.

Video 1: General Handleset Installation Guide (Tinewa Brand). This video demonstrates the typical steps for installing a handleset, which are applicable to the Weiser Prescott/Katella model.

Interiør view of the Weiser Prescott/Katella Handleset lever on a wooden door

Figur 4: Interiør view of the handleset lever.

4. Drift

The Weiser Prescott/Katella Handleset provides secure entry for your exterior door. To operate:

  • For å åpne fra utsiden: Insert your key into the keyhole and turn to unlock. Depress the thumb latch to retract the bolt and open the door.
  • For å åpne innenfra: Simply depress the interior lever to retract the bolt and open the door.
  • For å låse fra utsiden: Close the door. Ensure the latch is fully extended. If paired with a deadbolt, engage the deadbolt.
  • For å låse fra innsiden: Close the door. Depress the interior lever to ensure the latch is fully extended. If paired with a deadbolt, engage the deadbolt.
Weiser Prescott/Katella Handleset installed on a wooden door, with a separate deadbolt above it

Figure 5: Handleset shown with a separate deadbolt (not included with this product).

5. SmartKey Security Feature

This Weiser handleset is compatible with SmartKey Security technology, allowing you to re-key your lock yourself in seconds. This feature provides convenience and enhanced security, enabling you to match your handleset key to other Weiser SmartKey locks you may own.

5.1. Re-Keying Your Lock

To re-key your lock using SmartKey technology:

  1. Insert your functioning key and turn it 1/4 turn clockwise.
  2. Insert the SmartKey Learn Tool fully and firmly into the SmartKey hole. Remove the SmartKey Learn Tool.
  3. Fjern funksjonstasten.
  4. Insert your new key fully and firmly into the keyhole. Turn it 1/2 turn counter-clockwise.
  5. Your lock is now re-keyed. Test the new key to ensure proper operation.

Video 2: Weiser SmartKey Tutorial - Re-Key Your Lock In Seconds. This official Weiser video demonstrates the quick and easy process of re-keying your SmartKey compatible lock.

Diagram illustrating Weiser SmartKey Security features including bump proof, pick resistant, drill resistant, and re-key technology

Figure 6: Weiser SmartKey Security features.

Step-by-step visual guide for re-keying a SmartKey lock with a functioning key, SmartKey Learn Tool, and new key

Figure 7: Visual steps for re-keying your SmartKey lock.

6. Vedlikehold

To ensure the longevity and optimal performance of your Weiser handleset, follow these maintenance guidelines:

  • Rengjøring: Rengjør håndtaket regelmessig med en myk klutamp klut. Unngå slipende rengjøringsmidler, løsemidler eller sterke kjemikalier, da disse kan skade overflaten.
  • Smøring: Periodically apply a silicone-based lubricant to the latch mechanism and key cylinder to ensure smooth operation. Do not use oil-based lubricants.
  • Stramskruer: Check all mounting screws periodically and tighten them if necessary to prevent looseness.

7. Feilsøking

If you encounter issues with your handleset, consider the following common solutions:

  • Håndtaket er løst: Check and tighten all visible screws on both the interior and exterior components.
  • Latch Not Retracting Smoothly: Apply a silicone-based lubricant to the latch mechanism. Ensure no debris is obstructing the latch.
  • Nøkkelen dreies ikke: Ensure the key is fully inserted. Check for any obstructions in the keyway. If using SmartKey, ensure the re-keying process was completed correctly.
  • Døren låser seg ikke: Verify the strike plate on the door frame is properly aligned with the latch. Adjust the strike plate if needed.

For persistent issues, contact Weiser customer support.

8. Spesifikasjoner

TrekkSpesifikasjon
ProdusentWeiser
Delenummer9GLA77710-010
Produktdimensjoner7.78 x 6.83 x 6.83 cm
Varevekt1.83 kg
StørrelsePrescott/Katella
FargeSatin nikkel
StilHandleset Minus Deadbolt
FullførPolert
MaterialeMetall
InstallasjonsmetodeUtenpåliggende
Antall varepakke1
Antall stykker2
HåndtaksmaterialeMetall
Spesielle funksjonerEnkel å installere
BrukExterior doors
Inkluderte komponenterHardware, Latch, Strike, Passage Door Handle (Deadbolt not included)
Batterier påkrevd?Ingen
OpprinnelseslandKina

9. Garanti og støtte

Your Weiser Prescott/Katella Handleset is backed by a Begrenset levetid for mekanisk og finish-garanti. This warranty covers defects in material and workmanship for the lifetime of the original residential user.

For warranty claims, technical assistance, or further inquiries, please contact Weiser customer support. Refer to the official Weiser webnettstedet for den mest oppdaterte kontaktinformasjonen og detaljerte garantivilkår.

© 2025 Weiser. Alle rettigheter forbeholdt.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.