Brukerhåndbok for PROVISION ISR 2MP IP PoE-kamera

1. Produktet er overview

The PROVISION ISR 2MP IP PoE Camera is a high-resolution security camera designed for both indoor and outdoor surveillance. It features 2-megapixel video capture, Power over Ethernet (PoE) support for simplified installation, and robust IP67 waterproof protection, making it suitable for various environmental conditions. The camera includes infrared (IR) night vision up to 60 meters, a built-in microphone, and supports H.265+ compression for efficient storage. It integrates seamlessly with NVR systems and offers remote access capabilities via mobile devices and PCs.

Nøkkelfunksjoner:

• Høyoppløselig bildebehandling: 2MP sensor for clear and detailed video footage.
• Power over Ethernet (PoE): Forenkler installasjonen ved å gi strøm og data over én enkelt Ethernet-kabel.
• Avansert nattsyn: Infrared (IR) illumination up to 60 meters for clear imaging in low-light or no-light conditions.
• Værbestandig design: IP67 rated for protection against dust and water, suitable for outdoor use.
• Innebygd mikrofon: Tar opp lyd sammen med video for omfattende overvåking.
• Smart Motion Detection: AI-based human movement detection for accurate alerts.
• Effektiv lagring: H.265+ video compression reduces storage requirements without compromising video quality.
• Fjerntilgang: View Lev footage and manage settings via web interface, mobile devices, and PCs.

Figur 1.1: Viktige funksjoner overview

2. Pakkens innhold

Please check the package contents carefully upon unboxing. If any items are missing or damaged, contact your vendor immediately.

• PROVISION ISR 2MP IP PoE Camera Body
• Bruksanvisning
• Monteringsskruer og veggplugger

Figure 2.1: PROVISION ISR 2MP IP PoE Camera

Figur 2.2: Side View av kameraet

3. Fysisk beskrivelse og forbindelser

Familiarize yourself with the camera's physical components and connection ports before installation.

Figure 3.1: Camera Dimensions and Cable Connections

Kabeltilkoblinger:

• Strøm inn: For DC12V power supply if not using PoE.
• RJ-45 (+PoE): Ethernet port for network connection and Power over Ethernet.
• Lyd ut: For connecting an external audio output device.
• Lyd inn: For connecting an external microphone (camera has a built-in mic).
• Video ut: Analog video output for local monitoring during setup.
• COM, Alarm Out, Alarm In, GND: For alarm integration with external devices.

Figure 3.2: Internal Components (SD Card, Reset Button, Lens Controls)

Interne komponenter:

• SD-kortspor: For local video storage. Supports microSD cards.
• MVF Lens Controls: Manual controls for adjusting the motorized varifocal lens.
• Technician Port: For advanced configuration and diagnostics.
• Tilbakestill-knapp: Brukes til å gjenopprette fabrikkinnstillinger.

4. Oppsett og installasjon

4.1 Montering av kameraet

The camera is designed for ceiling mount installation. Ensure the mounting surface is strong enough to support the camera's weight.

1. Velg et passende sted for optimal overvåkingsdekning.
2. Use the provided mounting template (if applicable) or the camera base to mark the drill holes on the ceiling.
3. Bor pilothull og sett inn veggplugger om nødvendig.
4. Fest kamerabasen til monteringsoverflaten med de medfølgende skruene.
5. Adjust the camera angle for desired viewing.

4.2 Strøm- og nettverkstilkobling

The camera supports Power over Ethernet (PoE) for simplified wiring.

1. Connect an Ethernet cable from a PoE-enabled switch or NVR to the camera's RJ-45 port. This will provide both power and network connectivity.
2. Alternatively, if PoE is not available, connect a DC12V power adapter (not included) to the camera's 'Power In' port and an Ethernet cable to the RJ-45 port for network connection.
3. Sørg for at alle kabeltilkoblinger er sikre og beskyttet mot miljøfaktorer.

4.3 Innledende konfigurasjon

After physical installation and power-up, the camera needs initial network configuration.

1. Koble datamaskinen til samme nettverk som kameraet.
2. Use the PROVISION ISR IP Camera Search Tool (available on the manufacturer's website) to discover the camera's IP address.
3. Åpne a web nettleseren og skriv inn kameraets IP-adresse for å få tilgang til den web grensesnitt.
4. Log in using the default credentials (refer to the camera's quick start guide or manufacturer's documentation for default username and password).
5. Endre standardpassordet umiddelbart av sikkerhetshensyn.
6. Configure network settings (IP address, subnet mask, gateway, DNS) as required by your network environment.
7. Set up date and time, and time zone.

5. Betjening av kameraet

5.1 Live View og opptak

Access live video streams and manage recording settings through the web interface or compatible NVR/mobile applications.

• Web Grensesnitt: Log in to the camera's web grensesnitt til view live video, adjust image settings (brightness, contrast, saturation), and configure recording schedules.
• NVR System: Add the camera to your Network Video Recorder (NVR) system for centralized management, recording, and playback. Refer to your NVR's manual for camera addition procedures.
• Mobilapplikasjon: Download the official PROVISION ISR mobile application (available for iOS and Android) to view live feeds, receive alerts, and access recorded footage eksternt.
• SD-kortopptak: If an SD card is installed, configure recording settings (continuous, motion-triggered, scheduled) via the web grensesnitt.

5.2 Bevegelsesdeteksjon og varsler

The camera features smart motion detection to trigger alerts and recordings.

1. Navigate to the 'Event' or 'Alarm' settings in the camera's web grensesnitt eller NVR.
2. Enable motion detection and define detection zones within the camera's field of view.
3. Juster følsomhetsnivåene for å minimere falske alarmer.
4. Configure alert actions, such as sending email notifications, pushing notifications to the mobile app, or triggering NVR recording.

5.3 Nattsynsdrift

The camera automatically switches to infrared (IR) mode in low-light conditions.

• The built-in IR LEDs provide illumination for clear black-and-white video up to 60 meters in complete darkness.
• Ensure there are no obstructions directly in front of the IR LEDs that could cause reflection and degrade night vision quality.

6. Vedlikehold

Regelmessig vedlikehold sikrer kameraets levetid og optimale ytelse.

• Rengjøring av linse: Gently wipe the camera lens with a soft, clean cloth. For stubborn dirt, use a lens cleaning solution designed for optical surfaces. Do not use abrasive cleaners.
• Rengjøring av bolig: Rengjør kamerahuset med annonseamp klut. Unngå bruk av sterke vaskemidler eller løsemidler.
• Fastvareoppdateringer: Periodically check the PROVISION ISR official website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the provided instructions carefully when performing updates.
• Kabelinspeksjon: Regularly inspect all cables for signs of wear, damage, or corrosion, especially for outdoor installations.
• Miljøsjekk: Ensure the camera's mounting remains secure and that its IP67 rating is not compromised by physical damage or improper sealing.

7. Feilsøking

Denne delen tar for seg vanlige problemer du kan støte på.

7.1 No Power / Camera Not Turning On

• Sjekk PoE-tilkoblingen: Ensure the Ethernet cable is securely connected to a PoE-enabled switch/NVR and that the PoE port is active.
• Sjekk strømadapteren: If using a separate power adapter, verify it is correctly connected and providing the correct voltage (DC12V). Test the power outlet.
• Kabelintegritet: Inspect the Ethernet cable for any damage or breaks. Try a different cable.

7.2 No Video / Offline Camera

• Nettverkstilkobling: Verify the camera has a valid IP address and can be pinged from your network. Check network cable connections.
• IP-adressekonflikt: Ensure no other device on your network is using the same IP address as the camera.
• NVR/Software Configuration: Confirm the camera is correctly added and configured in your NVR or surveillance software.
• Brannmurinnstillinger: Check if any firewall on your network or computer is blocking communication with the camera.
• Start på nytt: Power cycle the camera and the network device (switch/router/NVR) it is connected to.

7.3 Dårlig bildekvalitet

• Ren linse: Ensure the camera lens is clean and free from dust, smudges, or water droplets.
• Lysforhold: Verify adequate lighting in the surveillance area. For night vision, ensure no strong light sources are directly facing the camera.
• Nettverksbåndbredde: Insufficient network bandwidth can cause choppy or low-quality video. Check your network speed.
• Oppløsningsinnstillinger: Confirm the camera's resolution settings are configured to 2MP (1920x1080) in the web grensesnitt eller NVR.

7.4 Motion Detection Not Working / False Alarms

• Aktiver deteksjon: Ensure motion detection is enabled in the camera's settings.
• Deteksjonssone: Verify the detection zone covers the desired area.
• Følsomhet: Adjust the motion detection sensitivity. Lower sensitivity for fewer false alarms, higher for more precise detection.
• Miljøfaktorer: Moving trees, shadows, or sudden changes in light can trigger false alarms. Adjust detection zones or sensitivity accordingly.

8. Spesifikasjoner

9. Garanti og støtte

For warranty information, please refer to the warranty card included with your product or visit the official PROVISION ISR webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis.

For technical support, troubleshooting assistance, or further inquiries, please contact PROVISION ISR customer support through their official webnettstedet eller kontaktinformasjonen som er oppgitt på produktemballasjen.

Nettressurser:

• Besøk PROVISION ISR Store on Amazon for produktinformasjon og oppdateringer.
• Check the official PROVISION ISR website for the latest firmware, software tools, and detailed support documentation.