Innovations Lighting 516-1P-OB-G1215-8

Innovations Lighting Athens Water Glass Mini Pendant (Model: 516-1P-OB-G1215-8) Instruction Manual

Introduksjon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Innovations Lighting Athens Water Glass 1-Light Cord Mini Pendant. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Produktmodell: 516-1P-OB-G1215-8

Finish Farge: Oljegnidd bronse

Sikkerhetsinformasjon

WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the circuit breaker or fuse box before installation, servicing, or changing bulbs. Consult a qualified electrician if you are unsure about wiring procedures.

  • Always follow local electrical codes and ordinances.
  • Bruk kun spesifisert pæretype og hvatage.
  • Ikke overskrid maksimumsverdientage angitt på armaturet.
  • Handle glass components with care.
  • Hold brennbare materialer unna lysarmaturen.
  • Denne lampen er vurdert for damp steder.

Pakkeinnhold

Pakk forsiktig ut armaturen og identifiser alle delene. Ta vare på all emballasje til du er sikker på at alle delene er til stede og i god stand. Hvis noen deler mangler eller er skadet, må du ikke forsøke å montere eller installere armaturen.

  • Mounting Plate/Canopy
  • Fixture Body with Cord
  • Glass Shade (Athens Water Glass)
  • Sokkelring
  • Monteringsutstyr (skruer, trådmuttere)
Innovations Lighting Athens Water Glass Mini Pendant in Oil Rubbed Bronze finish

Image: Innovations Lighting Athens Water Glass Mini Pendant with Oil Rubbed Bronze finish. This image shows the complete pendant light assembly, including the cord, canopy, fixture body, and the distinctive water glass shade.

Oppsett og installasjon

  1. Slå av strømmen: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely.
  2. Forbered montering: Remove the old fixture (if applicable). Attach the mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
  3. Juster ledningslengde: The pendant comes with a 120-inch hanging cord. Adjust the cord length to your desired height by feeding the cord through the canopy and securing it.
  4. Ledningstilkoblinger:
    • Koble den svarte ledningen fra lampen til den svarte (varme) ledningen i huset.
    • Koble armaturens hvite ledning til husets hvite (nøytrale) ledning.
    • Connect the fixture's ground wire to the house's ground wire (bare copper or green).
    • Fest alle tilkoblinger med trådmuttere og pakk inn med elektrisk tape for ekstra sikkerhet.
  5. Mount Canopy: Carefully push the wired connections into the junction box. Secure the fixture canopy to the mounting plate using the provided screws.
  6. Installer glassskjerm:
    Athens Water Glass Shade with dimensions

    Image: Close-up of the Athens Water Glass shade, showing its 8-inch diameter and 7-inch height. This image illustrates the textured glass design.

    Thread the glass shade onto the fixture body and secure it with the socket ring. Do not overtighten.

  7. Installer pære: Insert one medium (E26) base bulb (not included) into the socket. Do not exceed the maximum wattage of 100 watts. Vintage Edison style bulbs are recommended for aesthetic purposes.
  8. Gjenopprett kraften: Når installasjonen er fullført, slå på strømmen igjen ved sikringsbryteren.

Bruksanvisning

This pendant light operates like any standard light fixture. Once properly installed and powered, it can be controlled by a wall switch (not included) connected to the circuit. The fixture is capable of being dimmed when used with a compatible dimmer switch and dimmable bulb.

Vedlikehold

  • Rengjøring: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
  • Bytte av pære: Ensure power is off before replacing the bulb. Allow the old bulb to cool before removing. Replace with a new medium (E26) base bulb, not exceeding 100 watts.
  • Undersøkelse: Sjekk alle tilkoblinger og monteringsutstyr med jevne mellomrom for å sikre at de forblir sikre.

Feilsøking

ProblemMulig årsakLøsning
Lyset tennes ikke.
  • Ingen strøm til armaturet.
  • Løs ledningsforbindelse.
  • Defekt pære.
  • Sjekk effektbryter/sikring.
  • Kontroller at alle ledningsforbindelser er sikre.
  • Skift ut pæren med en som du vet fungerer.
Lette flimmer.
  • Løs pære.
  • Feil pæretype for dimmer.
  • Løs ledningsforbindelse.
  • Stram pæren.
  • Ensure bulb is dimmable if using a dimmer.
  • Sjekk ledningsforbindelsene.

Spesifikasjoner

  • Modellnummer: 516-1P-OB-G1215-8
  • Merke: Innovations Lighting
  • Fixture Dimensions (Overall): 8 inches (Width) x 8 inches (Depth) x 11-1/8 inches (Height)
  • Shade Dimensions (Athens Water Glass): 8 tommer (diameter) x 7 tommer (høyde)
  • Produktvekt: 3 lbs
  • Materiale: Steel, Cast Brass, Glass
  • Fullfør: Oljegnidd bronse
  • Pæresokkel: Middels (E26)
  • Antall pærer: 1
  • Max Wattage: 100 watt (per pære)
  • Voltage: 120 volt
  • Hanging Cord Length: 120 tommer
  • Dimbar: Yes (with compatible dimmer and bulb)
  • Stedsvurdering: Damp
  • UPC: 745684636946

Garanti

This Innovations Lighting fixture is covered by a 2-year finish and electrical manufacturer warranty. Please retain your proof of purchase for warranty claims. For specific warranty details, please contact Innovations Lighting customer support.

Støtte

For technical assistance, missing parts, or warranty inquiries, please contact Innovations Lighting customer support. You can find contact information on the official Innovations Lighting webnettstedet eller gjennom forhandleren din.

Innovations Lighting Webnettsted: Visit the Innovations Store on Amazon