tectake Outdoor Wicker Garden Chairs (Set of 2)

Introduksjon

Thank you for choosing the tectake Outdoor Wicker Garden Chairs. This manual provides essential information for the safe assembly, use, and maintenance of your new chairs. Please read these instructions carefully before assembly and retain them for future reference.

These chairs are designed for outdoor use, offering a comfortable seating solution for your garden, patio, or balcony. They feature a durable alloy steel frame and weather-resistant synthetic rattan, complemented by removable cushion covers for easy care.

Sikkerhetsinstruksjoner

• Vektgrense: Do not exceed the maximum recommended weight of 120 kg (264 lbs) per chair.
• Forsamling: Ensure all components are correctly assembled and all screws are tightened before use. Periodically check and retighten screws as needed.
• Plassering: Place chairs on a stable, level surface to prevent tipping.
• Værforhold: While weather-resistant, it is recommended to store cushions indoors during heavy rain or prolonged periods of non-use to extend their lifespan.
• Barn: Keep children away from the assembly area. Do not allow children to climb or play on the chairs unsupervised.
• Skarpe gjenstander: Avoid contact with sharp objects that could damage the rattan or cushions.

Pakkeinnhold

Kontroller at alle deler er til stede før monteringen starter. Hvis noen deler mangler eller er skadet, vennligst kontakt kundestøtte.

• 2 x Synthetic Rattan Garden Chairs
• 2 x sitteputer
• 4 x Cushion Covers (2 sets: Grey and White)
• 1 x Monteringshåndbok
• 1 x Mounting Hardware Kit (screws, tools if applicable)

Image: Two tectake outdoor wicker garden chairs with light cushions, as received in the package.

Oppsett (montering)

Assembly is required for these chairs. It is recommended to have two people for easier and safer assembly. Please follow the steps below:

1. Pakk ut komponenter: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all components against the 'Package Contents' list.
2. Fest ben: Identify the chair frame and the legs. Securely attach each leg to the designated points on the chair frame using the provided screws and tools. Do not fully tighten screws until all parts are loosely assembled.
3. Assemble Backrest and Seat: Connect the backrest and seat sections if they are separate, ensuring proper alignment.
4. Stram til alle skruer: Once all parts are in place, gradually tighten all screws evenly until secure. Avoid over-tightening.
5. Attach Anti-Slip Feet: Ensure the anti-slip feet are securely attached to the bottom of each leg to protect your floor and provide stability.
6. Plasser puter: Insert the seat cushions into your preferred color covers (grey or white) and place them on the chairs.

Image: Diagram illustrating the dimensions of the tectake garden chair, including overall height, width, depth, seat dimensions, cushion thickness, and armrest height.

Bilde: Nærbilde view of the chair's details, highlighting the woven rattan, the comfortable cushion, and the protective anti-slip feet on the legs.

Drift (bruk)

Your tectake garden chairs are designed for comfortable outdoor seating. Here are some guidelines for optimal use:

• Tiltenkt bruk: These chairs are suitable for relaxation, dining, and general outdoor seating on patios, balconies, and gardens.
• Putetrekk: The chairs come with two sets of cushion covers (grey and white), allowing you to change the aesthetic to match your preference or occasion. Simply unzip and replace.
• Komfort: The soft, removable cushions provide optimal seating comfort. Adjust them as needed for your preferred position.

Image: Two tectake garden chairs with grey cushions positioned on a balcony next to a small table, demonstrating typical outdoor use.

Image: Two tectake garden chairs with white cushions placed beside a swimming pool, illustrating their use in a leisure setting.

Vedlikehold

Proper care will ensure the longevity and appearance of your tectake garden chairs.

• Putetrekk: The cushion covers are removable and washable. Follow the care instructions on the label, typically machine wash cold with similar colors and tumble dry low.
• Rattan and Frame: Clean the synthetic rattan and alloy steel frame with a soft cloth, mild soap, and water. Avoid abrasive cleaners or harsh chemicals that could damage the materials. Rinse thoroughly and dry completely.
• Værbeskyttelse: Although the chairs are UV and weather-resistant, prolonged exposure to extreme weather conditions (e.g., heavy snow, intense sun, or strong winds) can reduce their lifespan. Consider using outdoor furniture covers or storing the chairs in a sheltered area during off-seasons.
• Skruekontroll: Sjekk alle skruer og tilkoblinger med jevne mellomrom for å sikre at de sitter godt fast. Stram til etter behov.

Image: Visual representation of the chairs' weather-resistant properties, showing water repellency and durability against sun, rain, and snow.

Feilsøking

Hvis du støter på problemer med stolene dine, kan du se følgende vanlige løsninger:

• vinglete stol: Ensure all screws are fully tightened. Check that the chair is placed on a flat, even surface. Adjust the anti-slip feet if they are uneven.
• Manglende deler: If you find any parts missing upon unpacking, please refer to the 'Package Contents' section and contact tectake customer support with your purchase details.
• Vanskeligheter med å montere: Review the 'Setup (Assembly)' section carefully. Ensure you are using the correct screws for each part and that components are aligned properly before tightening. Do not force parts together.
• Cushion Covers Not Fitting: Ensure you are using the correct covers for the cushions. The covers are designed to fit snugly.

Spesifikasjoner

Garanti og støtte

tectake products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official tectake webnettstedet.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact tectake customer support. Have your model number (404552) and purchase details ready for faster service.

Kontaktinformasjon: Please refer to your purchase receipt or the tectake official webnettstedet for den mest oppdaterte kontaktinformasjonen for kundeservice.