Introduksjon
This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your FIELDMANN FDW 201602-E High-Pressure Washer. Please read this manual thoroughly before using the appliance and keep it for future reference.
Viktig sikkerhetsinformasjon: Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Ensure the appliance is used only with a suitable power supply and water source. Keep children and pets away from the operating area.
Produkt overview

Image: The FIELDMANN FDW 201602-E High-Pressure Washer, featuring its compact design, hose, and nozzle. This image illustrates the overall appearance of the product.
The FIELDMANN FDW 201602-E is a powerful electric high-pressure washer designed for various cleaning tasks. It features a robust 1600W motor, delivering a maximum pressure of 130 bar and a flow rate of 420 liters per hour. Key components include a self-priming metal pump, a 5-meter high-pressure hose, a 5-meter power cable, an adjustable nozzle, and integrated wheels for a soap bottle.
Oppsett
- Utpakking: Fjern alle komponenter forsiktig fra emballasjen. Sørg for at alle delene som er oppført i pakkelisten er til stede og uskadet.
- Forsamling:
- Attach the high-pressure hose to the washer's outlet and the spray gun. Ensure connections are secure to prevent leaks.
- Connect the adjustable nozzle to the spray gun.
- If applicable, attach any handles or wheels according to the diagrams in the full manual (not provided here).
- Vannforsyningstilkobling:
- Connect a garden hose (not supplied) to the water inlet of the pressure washer.
- Ensure the water supply hose is free from kinks and has an adequate flow rate. The unit features a self-priming pump, but a steady water supply is crucial.
- Turn on the water supply fully before starting the pressure washer.
- Strømforsyningstilkobling:
- Plug the 5-meter power cable into a grounded electrical outlet (220-240V, 50/60Hz).
- Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
Bruksanvisning
- Starte enheten:
- With the water supply on and the unit connected to power, press the ON/OFF switch to the 'ON' position.
- Squeeze the trigger on the spray gun to release air from the system and allow water to flow through until a steady stream is achieved.
- Adjusting Pressure and Nozzle:
- The FDW 201602-E features an adjustable nozzle. Rotate the nozzle head to change the spray pattern from a concentrated jet to a wider fan spray.
- Test alltid sprøytemønsteret på et lite synlig område først for å unngå å skade overflaten.
- Using Detergent (Soap Bottle Wheels):
- Fill the integrated soap bottle with an appropriate pressure washer detergent.
- Attach the soap bottle to the designated inlet on the pressure washer (refer to product diagrams for exact location).
- Engage the detergent function (usually by selecting a low-pressure nozzle setting or a specific detergent nozzle, if provided).
- Apply detergent to the surface, allow it to soak, then rinse with high-pressure water.
- Slår av:
- Vri PÅ/AV-bryteren til «AV»-posisjonen.
- Slå av vanntilførselen.
- Trykk på avtrekkeren på sprøytepistolen for å slippe ut eventuelt gjenværende trykk i systemet.
- Disconnect the power cable and water hose.
Vedlikehold
- Rengjøring: Tørk av utsiden av høytrykksspyleren med en ren rengjøringsmiddel etter hver bruk.amp cloth. Ensure no dirt or debris is blocking the air vents.
- Rengjøring av dyse: If the nozzle becomes clogged, use the provided nozzle cleaning tool (if included) or a thin wire to clear any obstructions.
- Vanninntaksfilter: Sjekk og rengjør vanninntaksfilteret regelmessig for å forhindre at det kommer rusk inn i pumpen.
- Lagring:
- Tøm alt vann fra pumpen, slangen og sprøytepistolen før oppbevaring.
- Oppbevar høytrykksvaskeren i et tørt, frostfritt miljø.
- Rull høytrykksslangen og strømkabelen pent opp.
- Vinterisering: In cold climates, it is crucial to protect the unit from freezing. Use a pump protector or antifreeze solution designed for pressure washers to prevent internal damage.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Enheten starter ikke | No power supply; ON/OFF switch is off; GFCI tripped. | Check power connection; Ensure switch is ON; Reset GFCI. |
| Lavt eller intet trykk | Utilstrekkelig vanntilførsel; Tett dyse; Luft i pumpen; Bøyd slange. | Ensure water supply is fully open; Clean nozzle; Squeeze trigger to purge air; Straighten hose. |
| Vannlekkasjer | Løse forbindelser; Skadede O-ringer eller tetninger. | Stram til alle tilkoblinger; inspiser og skift ut skadede O-ringer/tetninger. |
| Motoren stopper under drift | Overheating; Voltage drop; Thermal overload activated. | Allow unit to cool down; Check power supply; Reduce usage time. |
Spesifikasjoner
- Modell: FDW 201602-E
- Voltage/Frekvens: 220-240 V, 50/60 Hz
- Maks effekt: 1600 W
- Maks trykk: 130 bar
- Strømningshastighet: 420 liter i timen
- Pumpe Type: Metal, Self-priming
- Strømkabellengde: 5 meter
- Høytrykksslangelengde: 5 meter
- Dysetype: Regulerbar
- Dimensjoner (L x B x H): 35.3 x 32.2 x 50.7 cm
- Vekt: 8.46 kg
- Kompatible spesifikasjoner: CE, CSA
Garanti og støtte
For warranty information, technical support, or to inquire about replacement parts, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
Produsent: FIELDMANN
For further assistance, visit the official Fieldmann webnettstedet eller kontakt deres kundeserviceavdeling. www.fieldmann.com