GAMEMAX Master M905

GAMEMAX Master M905 Full Tower PC Chassis User Manual

Model: Master M905 | Brand: GAMEMAX

Introduksjon

This manual provides detailed instructions for the installation, operation, and maintenance of your GAMEMAX Master M905 Full Tower PC Chassis. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and longevity of your product.

The GAMEMAX Master M905 is a full tower chassis designed for high airflow and extensive hardware compatibility, supporting E-ATX, ATX, and M-ATX motherboards. It features ample storage options, efficient cooling with pre-installed LED fans, and a user-friendly design for system builders.

Pakkeinnhold

Kontroller at alle komponenter er til stede før du fortsetter med installasjonen:

  • GAMEMAX Master M905 Full Tower Chassis
  • 3 x 12cm 32 LEDs Blue Cooling Fans (pre-installed)
  • Accessory Kit (screws, standoffs, cable ties, etc.)
  • Brukerhåndbok (dette dokumentet)

Oppsett og installasjon

Follow these steps for initial setup and component installation:

1. Klargjøring av chassiset

Carefully remove the chassis from its packaging. Place it on a stable, flat surface. Remove the side panels by unscrewing the thumb screws at the rear of the chassis and sliding the panels backward.

GAMEMAX Master M905 PC case with side panel removed, showing internal layout

Bilde: Innvendig view of the GAMEMAX Master M905 chassis with the side panel removed, illustrating the spacious interior and drive bays.

2. Installasjon av hovedkort

Install the I/O shield into the rear opening of the chassis. Align your E-ATX, ATX, or M-ATX motherboard with the pre-installed standoffs. Secure the motherboard using the provided screws from the accessory kit.

Diagram showing motherboard and component compatibility within the chassis

Bilde: Diagram illustrating the internal layout and compatibility for E-ATX/ATX/M-ATX motherboards, maximum VGA card length, and CPU cooler height.

3. Installasjon av strømforsyningsenhet (PSU)

The Master M905 features a bottom-mounted PSU design. Install your power supply into the designated compartment at the bottom rear of the chassis. Secure it with screws from the outside rear of the case.

Diagram showing bottom-mounted PSU design with cable management

Bilde: Illustration of the bottom-mounted PSU design, highlighting the hidden compartment and cable management options for a cleaner build.

4. Installasjon av lagringsstasjon

The chassis supports multiple storage configurations:

  • 5.25" ODDs: Install up to three 5.25" optical disk drives in the front bays.
  • 3.5" HDDs / 2.5" SSDs: Utilize the eight 3.5" HDD bays or eight 2.5" SSD bays. Note: Installing longer VGA cards may require removing the middle HDD bracket.
Diagram showing 10 HDD positions and large storage space

Bilde: Detaljert diagramvisningasing the extensive storage capabilities, including 8 HDD bays and 2 SSD positions, along with cable management features.

5. Grafikkort og utvidelseskort

Install your graphics card and other expansion cards into the appropriate PCIe slots on your motherboard. Ensure they are securely fastened. The chassis supports VGA cards up to 450mm in length.

6. Kabeladministrasjon

Utilize the cable routing options behind the motherboard tray to organize and hide cables. This improves airflow and aesthetics.

7. Connecting Front Panel I/O

Connect the front panel cables (USB 3.0, USB 2.0, audio, power, reset, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Close-up of the top front panel I/O ports and fan controller

Bilde: Et nærbilde view of the top panel, showing the USB 3.0, USB 2.0, audio ports, power button, reset button, and fan controller switches.

Bruksanvisning

Slår på/av

Press the power button located on the top panel to turn your system on or off. A short press typically initiates power on, while a longer press (usually 4-5 seconds) will force a shutdown.

Viftekontroll

The top panel includes a fan controller. Use the switches to adjust the speed of the connected fans, allowing you to balance cooling performance and noise levels according to your preference.

Tilkobling på frontpanelet

Utilize the front panel USB 3.0 and USB 2.0 ports for connecting peripherals and external storage devices. The audio jacks provide convenient access for headphones and microphones.

Vedlikehold

Regular maintenance helps ensure optimal performance and extends the lifespan of your PC chassis.

Rengjøring av støvfilter

The Master M905 features filtered front, top, and base air intakes with pull-out dust filters. Regularly remove and clean these filters to prevent dust buildup inside the chassis, which can impede airflow and component cooling.

Bak view of GAMEMAX Master M905 PC case showing removable dust filters

Bilde: Bak og bunn view of the chassis, highlighting the easily accessible, pull-out dust filters for convenient cleaning.

Innvendig rengjøring

Periodically open the side panels and use compressed air to remove dust from internal components, especially fan blades and heatsinks. Ensure the system is powered off and unplugged before cleaning.

Feilsøking

If you encounter issues with your chassis, refer to the following common problems and solutions:

  • Systemet slår seg ikke på:
    • Ensure the power supply is properly connected to the wall outlet and the motherboard.
    • Verify all front panel power switch cables are correctly connected to the motherboard headers.
    • Check if the power supply unit (PSU) switch is in the "ON" position.
  • Fans are not spinning or LEDs are off:
    • Confirm fan power cables are securely connected to the motherboard or fan controller.
    • Check the fan controller settings on the top panel.
    • Ensure LED power cables are connected if applicable.
  • Front panel USB/Audio ports not working:
    • Verify that the front panel USB and audio cables are correctly connected to the corresponding headers on your motherboard.
    • Check your motherboard's BIOS/UEFI settings to ensure USB/audio ports are enabled.
  • Excessive dust buildup:
    • Regularly clean the pull-out dust filters as described in the Maintenance section.
    • Ensure proper airflow direction with intake and exhaust fans.

Spesifikasjoner

TrekkDetalj
ModellnavnMaster M905
MerkeGAMEMAX
SakstypeFullt tårn
HovedkortkompatibilitetE-ATX, ATX, M-ATX
Dimensjoner (LxBxH)20.16 x 8.26 x 20.75 tommer (512 x 210 x 527 mm)
Varevekt23.4 pund (10.6 kg)
MaterialeLegert stål
FargeSvart
5.25" diskbrønner3
3.5" HDD Bays8
2.5" SSD Bays8
Front I / O-porter2 x USB 3.0, 2 x USB 2.0, HD Audio (Mic/Headphone), Fan Controller
Forhåndsinstallerte vifter3 x 12cm 32 LEDs Blue Fans (Front)
Maks VGA-kortlengde450 mm
Maks CPU-kjølerhøyde170 mm
PSU-monteringstypeRear Mount (Bottom)
KjølemetodeAir, Water (supports 240/280/360mm radiators)
Dimensional drawing of the GAMEMAX Master M905 PC case

Bilde: A diagram illustrating the key dimensions of the GAMEMAX Master M905 chassis.

Garanti og støtte

GAMEMAX products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official GAMEMAX webnettstedet eller kontakt din lokale forhandler.

For ytterligere hjelp, vennligst besøk GAMEMAX Store on Amazon or consult the manufacturer's official support channels.

© 2024 GAMEMAX. Alle rettigheter forbeholdt.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.