GEEKVAPE Wenax M startpakke brukerhåndbok

1. Introduksjon

The GEEKVAPE Wenax M Starter Kit is a comprehensive vaping solution designed for convenience and portability. It harmoniously integrates the Wenax M Powerbank with a 2500mAh battery capacity and the Wenax M1 Mini Kit with a 400mAh battery capacity. This kit is engineered for extended use, offering up to 7 days of operation on a single charge of the power bank.

The device features a satin aluminum alloy casing complemented by a premium pebbled leather finish, ensuring both aesthetic appeal and a comfortable grip. It supports multi-device charging and utilizes magnetic charging for ease of use. The Wenax M1 Mini Pod has a 2ml capacity and supports 0.8Ω/1.2Ω resistance pods, providing versatile vaping experiences.

2. Hva er i esken

Vennligst sjekk innholdet i pakken din for å sikre at alle varene er til stede:

• 1x Wenax M1 Mini Device
• 1x Wenax M Powerbank
• 2x Refillable Pods (0.8Ω and 1.2Ω)
• 1x USB Type-C til Type-C-kabel
• 10x Geekvape Filter Drip Tips
• 1x brukerveiledning

3. Oppsett

3.1. Charging the Powerbank and Device

Before first use, fully charge both the Wenax M Powerbank and the Wenax M1 Mini Device.

• Powerbank Charging: Connect the Wenax M Powerbank to a power source using the provided USB Type-C to Type-C cable. The power bank has a 2500mAh capacity and supports Type-C 5V 2A charging.
• Enhetslading: The Wenax M1 Mini Device (400mAh) can be charged by magnetically attaching it to the Wenax M Powerbank. A gentle vibration will indicate that magnetic charging has begun.

3.2. Assembling the Wenax M1 Mini Device

• Sett inn pod: Select either the 0.8Ω or 1.2Ω refillable pod. Insert the pod firmly into the top of the Wenax M1 Mini Device until it clicks into place.
• Attach Drip Tip: Place one of the Geekvape Filter Drip Tips onto the mouthpiece of the pod.

3.3. Filling the Pod

• Remove the pod from the device.
• Locate the silicone stopper on the side of the pod. Open the stopper.
• Carefully fill the pod with your desired e-liquid through the filling port. Do not overfill.
• Lukk silikonproppen godt.
• Reinsert the filled pod into the device.
• Viktig: After filling a new pod, wait at least 5-10 minutes before vaping to allow the coil to become fully saturated with e-liquid. This prevents dry hits and extends coil life.

4. Bruksanvisning

4.1. Slå på/av

The Wenax M1 Mini Device is draw-activated, meaning there are no buttons to press for power on/off. Simply inhale from the mouthpiece to activate the device.

4.2. Vaping

Once the pod is filled and properly installed, and the device is charged, simply draw on the mouthpiece as you would with a traditional cigarette. The device will automatically produce vapor.

4.3. Smart Prompt (LED & Vibration)

The Wenax M Powerbank features smart prompts via LED indicators and vibration to communicate its status, such as charging progress or low battery. Refer to the LED indicator guide in the full manual for detailed information.

5. Vedlikehold

5.1. Rengjøring

• Regularly clean the contact points between the pod and the device with a dry cotton swab to ensure optimal connection.
• Wipe down the exterior of both the Wenax M Powerbank and the Wenax M1 Mini Device with a soft, dry cloth.
• If any e-liquid leaks, clean it immediately to prevent damage to the device.

5.2. Pod Replacement

Pods are consumable parts and should be replaced when you notice a burnt taste, reduced vapor production, or a change in flavor. To replace a pod:

• Pull the old pod out of the device.
• Kast den gamle poden på en ansvarlig måte.
• Insert a new, filled pod into the device.

6. Feilsøking

This section addresses common issues you might encounter with your Wenax M Starter Kit.

7. Spesifikasjoner

7.1. Wenax M Powerbank

• Batterikapasitet: 2500mAh
• Smart melding: LED & Vibration
• Ladespesifikasjon: Type-C 5V 2A
• Utgangsspesifikasjon: Type-C 5V 1A
• Dimensjoner: 93.5 mm (H) x 34 mm (B) x 22 mm (D)
• Vekt: Omtrent 230g

7.2. Wenax M1 Mini Device

• Pod-kapasitet: 2 ml
• Batterikapasitet: 400mAh
• Pod-motstand støttes: 0.8Ω / 1.2Ω
• Utgang Voltage: 3.2-4.2V
• Utgangseffekt: 16W Maks
• Dimensjoner: Φ16mm (Diameter) x 78mm (Length, Pod Excluded)

8. Sikkerhetsinformasjon

Vennligst les og forstå alle sikkerhetsadvarsler før du bruker dette produktet for å unngå skade eller materielle skader.

• Dette produktet er beregnet for external use only.
• Oppbevares utilgjengelig for barn og kjæledyr.
• Ikke utsett enheten for ekstreme temperaturer, direkte sollys eller vann.
• Use only the charging cable provided with the kit.
• Ikke demonter eller modifiser enheten.
• If the device shows signs of damage, overheating, or unusual behavior, discontinue use immediately.
• Kast elektronisk avfall på en ansvarlig måte i henhold til lokale forskrifter.

9. Garanti og støtte

For warranty information, technical support, or service inquiries, please contact GEEKVAPE customer service or the authorized retailer from whom you purchased the product. Please retain your proof of purchase for warranty claims.