Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner User Manual

1. Introduksjon

Thank you for choosing the Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before use and retain them for future reference.

Image: The Vacmaster VK1638SWC vacuum cleaner actively cleaning a workshop floor, demonstrating its industrial application.

2. Sikkerhetsinformasjon

Følg alltid grunnleggende sikkerhetsregler når du bruker dette apparatet for å redusere risikoen for brann, elektrisk støt eller skade.

• Read all instructions before operating the vacuum cleaner.
• Ikke la apparatet være uten tilsyn når det er koblet til. Trekk ut støpselet når det ikke er i bruk og før service.
• Do not pick up hot ashes, coals, or flammable/combustible liquids.
• Ikke bruk i nærheten av eksplosive væsker eller damper.
• Ensure all filters are correctly installed for the intended operation (wet or dry).
• Hold hår, løse klær, fingre og alle deler av kroppen unna åpninger og bevegelige deler.
• Bruk kun som beskrevet i denne håndboken. Bruk kun produsentens anbefalte tilbehør.
• Ikke bruk med skadet ledning eller støpsel. Hvis apparatet ikke fungerer som det skal, har blitt mistet, skadet, forlatt utendørs eller falt i vann, returner det til et servicesenter.
• Ikke trekk eller bær i ledningen, bruk ledningen som håndtak, lukk en dør på ledningen, eller trekk ledningen rundt skarpe kanter eller hjørner. Ikke kjør apparatet over ledningen. Hold ledningen unna oppvarmede overflater.
• Ikke koble fra ved å trekke i ledningen. For å koble fra, ta tak i støpselet, ikke ledningen.
• Ikke håndter støpselet eller apparatet med våte hender.
• Slå av alle kontroller før du trekker ut støpselet.
• Vær ekstra forsiktig ved rengjøring i trapper.
• Ikke bruk til å plukke opp brennbare eller brennbare væsker, for eksempel bensin, eller bruk i områder der de kan være tilstede.
• Ikke plukk opp noe som brenner eller ryker, for eksempel sigaretter, fyrstikker eller varm aske.
• Ikke bruk uten filtre på plass.
• Dette apparatet er ikke beregnet for bruk av personer (inkludert barn) med reduserte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og kunnskap, med mindre de har fått tilsyn eller instruksjoner om bruk av apparatet av en person som er ansvarlig for deres sikkerhet.
• Barn bør overvåkes for å sikre at de ikke leker med apparatet.

3. Pakkens innhold

Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, contact Vacmaster customer support.

• 1 x Dust Extractor Unit
• 1 x HEPA 13 Cartridge Filter
• 1 x HEPA Exhaust Filter
• 1 x Pre-filter (washable)
• 1 x skumfilter
• 2 x forlengelsesrør
• 1 x Handle with Air Flow Control
• 1 x Universal Floor Head
• 1 x Dual Mode Floor Head
• 1 x Anti-crush Hose
• 1 x Round Dusting Tool
• 1 x Extra-large Crevice Tool
• 1 x Universal Power Tool Adaptor
• 1 x tilbehørsveske
• 1 x 38L Hygiene Seal Dust Bag

Image: The Vacmaster VK1638SWC unit displayed with its full range of included accessories.

4. Oppsett

4.1 Montering av støvsugeren

1. Fest hjul: Insert the casters into the designated slots on the base of the vacuum until they click securely into place.
2. Fest håndtak: Secure the handle to the top of the unit using the provided hardware.
3. Koble til slange: Insert the anti-crush hose into the suction inlet on the front of the tank. Ensure it is firmly seated.
4. Installer filtre: Refer to section 4.2 for specific filter installation based on your intended use (wet or dry).

Bilde: Et nærbilde view of the yellow latch, indicating how to secure or release the motor head from the tank.

4.2 Filterinstallasjon

The VK1638SWC uses different filters for wet and dry applications. Always ensure the correct filter is installed before operation.

• For tørrstøvsuging: Install the HEPA 13 Cartridge Filter and the washable Pre-filter. Ensure the HEPA Exhaust Filter is also in place. The 38L hygiene seal dust bag can be used for improved dust collection and disposal.
• For våtstøvsuging: Remove the HEPA 13 Cartridge Filter and Pre-filter. Install the Foam Filter over the filter cage. Do NOT use the dust bag for wet vacuuming.

Image: A person demonstrating the process of accessing and handling the filter inside the vacuum cleaner's tank.

5. Bruksanvisning

5.1 Tørrstøvsuging

1. Ensure the HEPA 13 Cartridge Filter and Pre-filter are correctly installed.
2. Connect the desired extension tubes and floor head (universal or dual mode) or other accessory to the hose.
3. Koble strømledningen til en passende stikkontakt (240 volt).
4. Turn the vacuum cleaner ON using the power switch.
5. Begin vacuuming the dry debris.
6. Når du er ferdig, slå AV støvsugeren og trekk ut støpselet.

Image: The Vacmaster VK1638SWC vacuum cleaner fully assembled with its hose, extension tubes, and floor head.

5.2 Våtstøvsuging

1. Ensure the Foam Filter is correctly installed and the HEPA 13 Cartridge Filter and Pre-filter are removed.
2. Connect the desired floor head or accessory suitable for wet pickup to the hose.
3. Koble strømledningen til en passende stikkontakt.
4. Turn the vacuum cleaner ON.
5. Begin vacuuming liquids. The vacuum has an automatic shut-off feature that will stop suction when the tank is full.
6. When finished or when the tank is full, turn the vacuum OFF and unplug it. Empty the tank as described in the Maintenance section.

Image: The Vacmaster VK1638SWC vacuum cleaner demonstrating its liquid draining capability from the tank's outlet.

5.3 Viftefunksjon

The VK1638SWC can also function as a powerful blower.

1. Ensure the tank is empty and clean, and the appropriate filter is installed (HEPA for dry blowing, no filter or foam filter for wet blowing).
2. Fjern slangen fra sugeinntaket.
3. Insert the hose into the blower port located on the motor head.
4. Plug in and turn ON the vacuum to use the blower function.

5.4 Power Tool Connection

The included universal power tool adaptor allows for direct dust extraction when working with power tools.

1. Ensure the vacuum is set up for dry vacuuming with the HEPA 13 filter.
2. Connect the universal power tool adaptor to the end of the vacuum hose.
3. Attach the other end of the adaptor to the dust extraction port on your power tool.
4. Plug the power tool into the integrated power socket on the vacuum cleaner (if available and compatible). This allows the vacuum to start automatically when the power tool is activated.
5. Turn on the vacuum cleaner and then your power tool to begin dust extraction.

Image: The Vacmaster VK1638SWC vacuum cleaner connected to a sanding machine, demonstrating its dust extraction capability.

5.5 Using the Wheel Brake

To secure the vacuum cleaner in place, engage the wheel brake by pressing down on the lever located on one of the casters. To release, lift the lever.

Image: A person's foot pressing down on the yellow lever to engage the wheel brake on the vacuum cleaner.

6. Vedlikehold

Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner. Always unplug the unit before performing any maintenance.

6.1 Rengjøring og utskifting av filter

• HEPA 13 Cartridge Filter & Pre-filter: For dry use, these filters should be cleaned regularly by tapping them gently to dislodge dust or by using a soft brush. The pre-filter is washable; rinse with water and allow to air dry completely before reinstallation. Replace the HEPA cartridge filter when suction power significantly decreases or if it becomes damaged.
• Skumfilter: For wet use, the foam filter should be rinsed with water after each use and allowed to air dry completely before storage or next use.
• HEPA Exhaust Filter: Check periodically and replace if visibly dirty or if air quality issues are noted.

6.2 Tank Cleaning and Emptying

• Tørt avfall: Unlatch the motor head and carefully lift it off. Remove the dust bag (if used) and dispose of contents. Empty any remaining debris from the stainless steel tank.
• Væsker: For liquid disposal, the tank can be emptied by tilting the unit or by using the drain plug located at the bottom of the tank. After emptying, rinse the tank with water and wipe dry to prevent odors and corrosion.

6.3 Oppbevaring av tilbehør

The VK1638SWC features integrated storage for its accessories, keeping them organized and readily accessible.

Image: The Vacmaster VK1638SWC vacuum cleaner showcasing its onboard storage for hose, power cord, and various attachments.

7. Feilsøking

Før du kontakter kundestøtte, se følgende tabell for vanlige problemer og løsninger på dem.

8. Spesifikasjoner

9. Garanti og støtte

9.1 Garantiinformasjon

The Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner comes with a 2 års garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized repairs, or lack of maintenance.

9.2 Kundestøtte

For technical assistance, warranty claims, or to order replacement parts, please contact Vacmaster customer support. Refer to the contact information provided with your purchase documentation or visit the official Vacmaster webnettstedet.