AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery User Manual

1. Introduksjon

Thank you for choosing the AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery. This battery is designed to provide reliable power for your compatible AUTDER 21V tools, specifically the AD380 21V Tire Inflator and AUTDER 21V Chainsaw. This manual provides essential information for the safe and efficient use, maintenance, and storage of your battery.

Image 1.1: The AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery. This image displays the battery unit with its branding, voltage, and capacity markings, along with a charging port.

2. Viktige sikkerhetsinstruksjoner

Read all safety warnings and instructions before using the battery. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Lader: Only use the AUTDER 21V compatible charger to charge this battery. Using an incompatible charger may cause fire or damage to the battery.
• Temperatur: Do not charge or store the battery in temperatures below 0°C (32°F) or above 45°C (113°F). Avoid direct sunlight and extreme heat.
• Skader: Ikke bruk et skadet eller modifisert batteri. Skadede batterier kan oppføre seg uforutsigbart og føre til brann, eksplosjon eller risiko for skade.
• Vanneksponering: Do not expose the battery to water or rain. Water entering a battery may increase the risk of electric shock or fire.
• Kortslutning: Do not short-circuit the battery terminals. Keep the battery away from metal objects that could make a connection between the terminals.
• Avhending: Dispose of batteries properly according to local regulations. Do not dispose of batteries in household waste or by incineration.
• Barn: Oppbevar batteriet utilgjengelig for barn.

3. Pakkens innhold

Kontroller at alle varene er til stede når du åpner pakken:

• 1 x AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery (Model NC2030AM-UK)

Note: The compatible charger and tools are sold separately.

4. Oppsett

4.1 Lading av batteriet

1. Connect the AUTDER 21V compatible charger to a standard power outlet.
2. Align the battery with the charger and slide it into place until it clicks securely.
3. Observe the charging indicator lights on the battery or charger. Typically, a red light indicates charging, and a green light indicates a full charge.
4. Når batteriet er fulladet, kobler du det fra laderen og kobler laderen fra stikkontakten.

Første bruk: It is recommended to fully charge the battery before its first use to ensure optimal performance and battery life.

4.2 Installing the Battery into a Tool

1. Ensure the tool is turned off before installing or removing the battery.
2. Align the battery with the battery slot on your compatible AUTDER 21V tool (e.g., AD380 Tire Inflator or 21V Chainsaw).
3. Slide the battery into the slot until it clicks firmly into place. Ensure it is fully seated and does not wobble.
4. To remove the battery, press the release button (if present) and slide the battery out of the tool.

Bilde 4.1: En annen view of the AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery. This image highlights the battery's design and the charging indicator lights, which are crucial for understanding its status.

5. Bruksanvisning

Once the battery is fully charged and securely installed in your compatible AUTDER 21V tool, you can begin operation.

5.1 Using with AUTDER AD380 Tire Inflator

1. Ensure the battery is fully charged and properly installed in the AD380 tire inflator.
2. Connect the inflator hose to the tire valve.
3. Set the desired pressure on the inflator's display.
4. Press the power button on the inflator to start inflation. The battery will provide power until the set pressure is reached or the inflator is turned off.
5. Monitor the battery level indicator on the battery or tool during extended use.

5.2 Using with AUTDER 21V Chainsaw

1. Ensure the battery is fully charged and properly installed in the 21V chainsaw.
2. Follow the chainsaw's specific operating instructions for starting, cutting, and safety.
3. The battery provides consistent power for cutting tasks.
4. Always check the battery level before starting a task to avoid interruptions.

6. Vedlikehold og lagring

6.1 Retningslinjer for lading

• Do not overcharge the battery. Disconnect it once fully charged.
• Avoid completely draining the battery before recharging, as this can reduce its lifespan. Recharge when the power is low.
• Allow the battery to cool down before charging if it has been used extensively.

6.2 Oppbevaringsanbefalinger

• Oppbevar batteriet på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer.
• Ved langtidslagring, lad batteriet til omtrent 50–60 % kapasitet.
• Ta ut batteriet fra verktøyet når det ikke er i bruk over lengre tid.

6.3 Rengjøring

• Use a clean, dry cloth to wipe the battery casing and terminals.
• Ikke bruk løsemidler eller skurende rengjøringsmidler.
• Ensure terminals are free from dirt and debris for optimal connection.

7. Feilsøking

8. Tekniske spesifikasjoner

9. Garanti og kundestøtte

AUTDER products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your original purchase or visit the official AUTDER webnettstedet.

If you encounter any issues or have questions about your AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery, please contact AUTDER customer support through the contact information provided on our official website or your purchase platform. Please have your model number (NC2030AM-UK) and purchase details ready when contacting support.