Introduksjon
This manual provides detailed instructions for the safe and efficient use of your OHLUX MF18228 LED Floor Lamp. This modern torchiere lamp features 36W/3000LM brightness, 5 adjustable color temperatures, and convenient remote and touch controls. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Sikkerhetsinstruksjoner
- Sørg for at strømforsyningen voltage samsvarer med lamps krav (110V).
- Dette produktet er kun beregnet for innendørs bruk. Må ikke utsettes for vann eller høy luftfuktighet.
- Ikke forsøk å demontere eller modifisere lamp. Det er ingen deler inni som kan repareres av brukeren.
- Behold lamp vekk fra varmekilder og direkte sollys.
- Koble alltid fra lamp fra stikkontakten før rengjøring eller vedlikehold.
- Sørg for at lamp is placed on a stable, level surface to prevent tipping. The weighted base is designed for stability.
- Keep the remote control and its batteries out of reach of children.
Pakkeinnhold
Kontroller at alle komponenter er til stede før montering:
- LED Lamp Hode
- Lamp Stangseksjoner (vanligvis 3–4 seksjoner)
- Vektet base
- Strømadapter/ledning
- Fjernkontroll (AAA-batterier ikke inkludert)
- Brukerhåndbok
Oppsett og montering
Follow these steps to assemble your OHLUX Floor Lamp:
- Fest basen: Carefully screw the lowest pole section into the weighted base until secure.
- Sett sammen stangen: Connect the remaining pole sections by screwing them clockwise. Ensure each section is tightly fastened to prevent wobbling.
- Fest Lamp Hode: Skru på lamp head onto the top pole section. Ensure the power cord passes freely through the pole.
- Koble til strøm: Koble strømledningen til et standarduttak på 110 V.
- Installer eksterne batterier: Open the battery compartment on the back of the remote control and insert two AAA batteries (not included), observing polarity.
Bruksanvisning
Your OHLUX Floor Lamp can be controlled via the included remote control or the touch buttons located on the lamp stang.
Fjernkontrollfunksjoner
- Strømknapp: Snur lamp På eller av.
- Color Temperature Buttons (CCT+ / CCT-): Adjusts the color temperature steplessly from 2700K (warm white) to 6500K (cool white).
- Brightness Buttons (+ / -): Adjusts the brightness steplessly from 10% to 100%.
- Nattlysknapp: Activates a preset low brightness, warm color temperature mode suitable for sleeping environments.
- Magnetisk feste: The remote can be conveniently attached to the lamp pole or any metal surface.
Trykk på kontrollfunksjoner
- On/Off/Short Press: A short press cycles through 4 preset color temperatures (e.g., 2700K, 4000K, 5000K, 6500K).
- Long Touch (Color Temperature): Press and hold to steplessly adjust the color temperature from 2700K to 6500K.
- Short Touch (Brightness): A short press cycles through 4 preset brightness levels (e.g., 25%, 50%, 75%, 100%).
- Long Touch (Brightness): Press and hold to steplessly adjust the brightness from 10% to 100%.
Minnefunksjon
Lamp features a memory function that remembers your last brightness and color temperature settings. These settings are retained even after the lamp is turned off via the wall switch or in case of a power outage, saving you from frequent adjustments.
Nattlysmodus
Activate the dedicated night light mode via the remote control for a soft, low-intensity light, ideal for nighttime use without disturbing sleep.
Vedlikehold
- Rengjøring: Sørg for at lamp is unplugged before cleaning. Use a soft, dry cloth to wipe the lamp's surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
- LED-lyskilde: LED-lyskilden er integrert og kan ikke byttes ut av brukeren. Ikke forsøk å bytte ut LED-lysene.
- Fjernkontroll: Replace AAA batteries in the remote control when its range decreases or it becomes unresponsive.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Lamp slås ikke på. | No power, loose connection, remote batteries dead. | Sjekk om strømledningen er ordentlig koblet til. Sørg for at stikkontakten fungerer. Skift batteriene i fjernkontrollen. |
| Fjernkontrollen reagerer ikke. | Dead batteries, remote too far, interference. | Replace remote batteries. Ensure you are within the 50ft (15m) range. Remove any obstructions between the remote and the lamp. |
| Lamp flimrer eller dimmer uventet. | Unstable power supply, internal issue. | Prøv å koble til lamp into a different outlet. If the problem persists, contact customer support. |
| Kan ikke justere lysstyrke eller fargetemperatur. | Remote issue, touch control issue. | Ensure remote batteries are fresh. Try using the touch controls on the lamp pole. If both fail, contact customer support. |
Spesifikasjoner
| Trekk | Spesifikasjon |
|---|---|
| Modellnummer | MF18228 |
| Merke | OHLUX |
| Strømkilde | Elektrisk med ledning |
| Voltage | 110 volt |
| Wattage | 36 watt |
| Lysstyrke | 3000 lumen |
| Fargetemperatur | 2700K - 6500K (Stepless Adjustable) |
| Fargegjengivelsesindeks (CRI) | 85.00 |
| Kontrollmetode | Fjernkontroll, berør |
| Produktdimensjoner | 24.9 cm D x 24.9 cm B x 175.3 cm H (9.8 cm D x 9.8 cm B x 69 cm H) |
| Varevekt | 7.7 pund (3.5 kilo) |
| Materiale | Powdered Metal Steel |
| Finish Type | Pulverlakkert |
| Lamp Type | LED |
| Innendørs/utendørs bruk | Innendørs |
| Spesielle funksjoner | Extended Cord, Improved Cooling System, Smooth Bright Dimmable, Smooth Color Temperature Dimmable, Super Bright |
Garantiinformasjon
Specific warranty details for the OHLUX MF18228 Floor Lamp are not provided in the product description. For information regarding warranty coverage and terms, please contact OHLUX customer support directly.
Kundestøtte
For technical assistance, service inquiries, or any questions regarding your OHLUX Floor Lamp, please contact OHLUX customer support. The manufacturer aims to reply within 24 hours to ensure customer satisfaction.
Please refer to the official OHLUX website or your purchase documentation for the most current contact methods.