iTOMA CKS213 Digital Alarm Clock User Manual

Introduksjon

Thank you for choosing the iTOMA CKS213 Digital Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and to maximize your user experience.

Sikkerhetsinformasjon

• Ikke utsett enheten for ekstreme temperaturer, direkte sollys, støv eller fuktighet.
• Ensure the power adapter is connected to an easily accessible outlet.
• Bruk kun den medfølgende strømadapteren. Bruk av uautoriserte adaptere kan skade enheten og ugyldiggjøre garantien.
• Hold enheten unna vann eller andre væsker.
• Do not attempt to disassemble or modify the unit. This may cause damage or injury.
• The backup battery is for memory retention only; the clock requires main power for full operation.

Pakkeinnhold

Vennligst sjekk pakken for følgende varer:

• iTOMA CKS213 Digital Alarm Clock
• Power Adapter (60-inch cable)
• CR2032 Backup Battery (pre-installed or included)
• Brukerhåndbok (dette dokumentet)

Produkt overview

Familiarize yourself with the various features and controls of your iTOMA CKS213 Digital Alarm Clock.

Oppsett

1. Strømtilkobling

Connect the provided power adapter to the DC input port on the back of the alarm clock, then plug the adapter into a standard wall outlet. The clock display will illuminate.

2. Installing Backup Battery

The clock includes a pre-installed CR2032 battery for backup. This battery preserves time and alarm settings during a power outage. The clock will not operate on battery power alone; it requires main power for the display and alarm functions.

3. Innstilling av starttidspunkt

Upon initial power connection, the clock may automatically set the time. If manual adjustment is needed, press and hold the 'CLOCK' button located on the top of the unit. Use the 'SETTING+' and 'SETTING-' buttons to adjust the hour and minute. Press 'CLOCK' again to confirm.

4. 12/24-timers format

To switch between 12-hour and 24-hour time formats, press the '12/24H' button (often integrated with 'CLOCK' or 'SETTING' buttons, refer to the top panel diagram on your device). In 12-hour format, 'AM' or 'PM' indicators will be displayed.

Bruksanvisning

1. Setting Dual Alarms (AL1 & AL2)

The iTOMA CKS213 features two independent alarms. Follow these steps to set an alarm:

1. Press and hold the 'AL1' or 'AL2' button to enter alarm setting mode. The hour display will flash.
2. Use the 'SETTING+' and 'SETTING-' buttons to adjust the desired alarm hour.
3. Press 'AL1' or 'AL2' again to confirm the hour and move to minute adjustment. The minute display will flash.
4. Use the 'SETTING+' and 'SETTING-' buttons to adjust the desired alarm minute.
5. Press 'AL1' or 'AL2' again to confirm the minute and select the alarm mode.
6. Use 'SETTING+' or 'SETTING-' to cycle through the 4 alarm modes:
• ALL-7-DAY: Alarmen lyder hver dag.
• UKEDAG: Alarmen går mandag til fredag.
• WEEKEND: Alarmen går lørdag og søndag.
• SINGLE DAY: Alarm sounds only on the selected day.
7. Press 'AL1' or 'AL2' one last time to save the alarm settings and activate the alarm. An alarm icon will appear on the display.

2. Snooze-funksjon

When an alarm sounds, press the large 'SNOOZE' button on the top of the clock to temporarily silence the alarm for 9 minutes. You can repeat this up to 6 times. To turn off the alarm completely, press the 'AL1 OFF' or 'AL2 OFF' button.

3. Display Brightness and Automatic Dimmer

The clock features a 0.9-inch orange LED display with adjustable brightness. You can manually set the brightness or enable the automatic dimmer function.

• Manuell lysstyrke: Press the 'DIMMER' button repeatedly to cycle through 3 brightness levels (High, Medium, Low).
• Automatisk dimmer: The built-in sensor automatically adjusts the display brightness based on ambient light conditions in the room. This feature ensures the display is not too bright in a dark room or too dim in a well-lit environment.

4. Nattlysdrift

The clock includes a 2-level orange night light. To activate or adjust the night light, locate the 'NIGHT LED' button (or similar) on the top panel and press it to cycle through the brightness levels or turn it off.

5. USB -ladeport

A USB-A charging port is located on the back of the unit. You can use this port to charge your smartphone or other mobile devices. Connect your device's USB charging cable to this port. The output is typically 1A.

Vedlikehold

• Rengjøring: Tørk av klokken med en myk, tørr klut. Ikke bruk slipende rengjøringsmidler eller løsemidler.
• Batteribytte: If the backup battery needs replacement, open the battery compartment on the bottom of the unit and replace the CR2032 battery with a new one, observing polarity.

Feilsøking

Spesifikasjoner

Garanti og støtte

iTOMA products are designed for reliability and performance. For any questions, concerns, or technical support regarding your CKS213 Digital Alarm Clock, please refer to the contact information provided with your purchase or visit the official iTOMA webnettstedet. Vennligst ta vare på kjøpsbeviset for garantikrav.