BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Introduksjon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Produktfunksjoner

• Integrert bevegelsessensor: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Tre driftsmoduser:
  • AUTO-modus: Light activates when motion is detected in dark conditions.
  • PÅ-modus: Light remains constantly on.
  • G-modus: Light activates when motion is detected in both daytime and nighttime conditions.
• Tre fargetemperaturer: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Ultratynn design: Lavprofffile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Allsidig installasjon: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Pakkeinnhold

Kontroller at alle komponenter er til stede før installasjonen starter:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x bruksanvisning (dette dokumentet)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Sikkerhetsinformasjon

ADVARSEL: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• Denne armaturen er designet for 120 V AC strømforsyning.
• Ikke forsøk å modifisere armaturen.
• Hold barn unna installasjonsområdet.

Oppsett og installasjon

Følg disse trinnene for riktig installasjon:

1. Forbered for installasjon:
   • Slå av strømmen ved sikringen før du starter.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Installer monteringsbrakett:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Ledningstilkoblinger:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Monter lysarmaturen:
   • Stikk alle ledninger forsiktig inn i koblingsboksen.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Gjenopprett kraften: Slå på strømmen igjen ved strømbryteren.

Figur 4: Visuell veiledning for installasjonsprosessen.

Bruksanvisning

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Velge driftsmodus:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • BIL: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • PÅ: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 sekunder
   • 120S: 120 sekunder (2 minutter)
   • 180S: 180 sekunder (3 minutter)

Figure 5: Switches for adjusting hold time and operating modes.

Vedlikehold

Regelmessig vedlikehold sikrer optimal ytelse og levetid for LED-taklampen din.

• Rengjøring: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• LED levetid: Den integrerte LED-lyskilden har en gjennomsnittlig levetid på 20 000 timer og kan ikke byttes ut av brukeren.
• Undersøkelse: Sjekk armaturen regelmessig for tegn på skade eller løse forbindelser. Hvis det oppdages problemer, koble fra strømmen og kontakt en kvalifisert elektriker.

Feilsøking

Hvis du støter på problemer med lysarmaturen din, kan du se følgende vanlige problemer og løsninger:

Spesifikasjoner

Garanti og støtte

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis.