JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

Introduksjon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Pakkeinnhold

Vennligst sjekk at alle varene som er oppført nedenfor er inkludert i pakken din:

JEYI M.2 NVMe SSD Enclosure
Termiske puter
Skrujern
USB-A to USB-C Cable (10Gbps)
USB-C to USB-C Cable (10Gbps)
Snørebånd

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Oppsettinstruksjoner

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Klargjør innkapslingen: Gently slide open the enclosure to reveal the internal PCB.
Påfør termisk pute: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Sikre SSD-en: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Lukk innkapslingen: Carefully slide the enclosure cover back into place until it clicks securely.

eksploderte view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Bruksanvisning

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Koble til enheten: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Strømindikator: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Dataoverføring: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Vedlikehold

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Varmehåndtering: Aluminium casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Rengjøring: Bruk en myk, tørr klut til å rengjøre utsiden av kabinettet. Unngå å bruke flytende rengjøringsmidler eller løsemidler.
Lagring: Når den ikke er i bruk, oppbevar den på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer.
Kabelpleie: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Feilsøking

Problem	Mulig årsak	Løsning
Enclosure not detected by computer.	Løs kabeltilkobling. SSD not properly installed. SSD not initialized/formatted. Feil på USB-port eller -kabel.	Sørg for at kablene er godt tilkoblet. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Prøv en annen USB-port eller kabel.
Lave dataoverføringshastigheter.	Koblet til en tregere USB-port (f.eks. USB 2.0). Thermal throttling due to high temperature. SSD performance limitations.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal drift under tung dataoverføring. Ineffective thermal pad contact.	This is expected as the aluminum casing avgir varme. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Spesifikasjoner

Trekk	Detalj
Modell	I9-Seal
Merke	JEYI
Maskinvaregrensesnitt	USB 3.2 Gen 2 (USB-C)
Dataoverføringshastighet	Opptil 10 Gbps
Kompatibel SSD-type	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Maks lagringskapasitet	4 TB
Brikkesett	JMS583 A3
Funksjoner	UASP Support, TRIM Support, Win to Go (WTG) Support
Materiale	Aluminiumslegering
Farge	Sølv
Produktdimensjoner	4.06 x 1.02 x 0.39 tommer (103 x 26 x 10 mm)
Varevekt	0.317 unser (9 gram)
Kompatible operativsystemer	Windows, macOS, Linux, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Garanti og støtte

For warranty information or technical support, please refer to the official JEYI webnettstedet eller kontakt kundeservicen deres direkte. Detaljer om spesifikke garantiperioder og støttekanaler finner du vanligvis i kjøpsdokumentasjonen eller på produsentens webnettstedet.

Produsent: JEYI

Webnettsted: Visit the JEYI Store on Amazon