1. Introduksjon
Thank you for choosing the Luqeeg Digital Wooden Alarm Clock. This device combines functionality with a minimalist design, offering time, date, temperature display, and alarm features. Its LED display and wooden finish make it a suitable addition to various environments such as offices, bedrooms, or bedside tables. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.
Image 1.1: The Luqeeg Digital Wooden Alarm Clock in a home setting.
2. Sikkerhetsinformasjon
- Ikke utsett enheten for vann eller høy luftfuktighet.
- Unngå ekstreme temperaturer og direkte sollys.
- Ikke slipp eller utsett enheten for sterke støt.
- Oppbevares utilgjengelig for barn.
- Bruk kun den medfølgende USB-kabelen til strøm.
- Kast batterier på en ansvarlig måte i henhold til lokale forskrifter.
3. Pakkens innhold
Vennligst sjekk pakken for følgende varer:
- 1 x Luqeeg LED Wooden Clock
- 1 x USB-kabel
- 1 x brukerhåndbok (dette dokumentet)
4. Produktet er overview
Familiarize yourself with the buttons and ports on the back of your alarm clock:
Bilde 4.1: Bak view of the clock with labeled controls.
- Batteri etui: Compartment for 3 AAA batteries (not included) for backup power.
- Power Adapter Jack: Connect the USB cable for primary power.
- RESET-tast: Resets the clock to factory settings.
- DOWN Adjustment Key: Reduserer verdiene under innstilling.
- UP Adjustment Key: Increases values during setting.
- SET-tast: Enters setting mode and confirms selections.
5. Oppsett
5.1 Slå på enheten
The clock can be powered via the included USB cable or by batteries for backup. For continuous operation, it is recommended to use the USB power supply.
- Primær strøm (USB): Connect the small end of the USB cable to the Power Adapter Jack on the back of the clock. Connect the other end to a USB power adapter (not included) or a powered USB port.
- Reserve batteri: Open the Battery Case on the back. Insert 3 AAA batteries (not included) into the compartment, ensuring correct polarity. Additionally, insert 1 CR2032 button cell battery (not included) for memory function, which retains settings during power outages.
Image 5.1: The clock with its USB cable for power connection.
6. Bruksanvisning
6.1 Basic Display Modes
The clock cycles through displaying time, date, and temperature. You can usually switch between display modes by pressing the UP or DOWN button outside of setting mode.
6.2 Stille inn tid og dato
- Trykk på SETT button once to enter time setting mode. The hour digits will flash.
- Bruk UP og NED knapper for å justere timen.
- Pressen SETT again to move to minute setting. Adjust with UP og NED.
- Fortsett å trykke SETT for å bla gjennom innstillinger for år, måned og dag, og justere hver med UP og NED.
- Pressen SETT en siste gang for å avslutte innstillingsmodus.
6.3 Stille inn alarm
The clock supports multiple alarms (e.g., AL1, AL2, AL3). The exact number may vary by model.
- Trykk på SETT button repeatedly until 'AL' appears, indicating alarm setting mode.
- Pressen SETT again to select an alarm (e.g., AL1). The hour digits will flash.
- Bruk UP og NED for å stille inn ønsket alarmtime.
- Pressen SETT to move to minute setting. Adjust with UP og NED.
- Pressen SETT to confirm the alarm time. You may then see an option to enable/disable the alarm (ON/OFF). Use UP/NED å velge.
- Repeat for other alarms if desired. Press SETT for å avslutte alarminnstillingsmodus.
6.4 Justering av lysstyrke
The clock features 3 levels of brightness. To adjust, press the UP button outside of setting mode. Each press will cycle through the brightness levels.
6.5 Voice Control Power Saving Mode
To conserve power, the display can be set to turn off automatically and activate only when sound is detected (e.g., a clap or tap). This mode is typically enabled or disabled by a long press of the NED button or a specific combination of buttons. Refer to the quick start guide for your specific model if this function is not immediately apparent.
Image 6.1: Demonstrating the voice control power saving mode.
7. Vedlikehold
- Rengjøring: Wipe the clock gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Batteribytte: If using battery backup, replace AAA batteries when the display dims or functions become erratic. Replace the CR2032 memory battery periodically (e.g., annually) to ensure settings are retained during power interruptions.
8. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Skjermen er av eller svak. | Power saving mode active, no power, or low batteries. | Tap the clock or make a sound to activate display. Check USB power connection. Replace AAA batteries. |
| Alarmen lyder ikke. | Alarmen er ikke aktivert eller feil innstilt. | Verify alarm settings (ON/OFF) and ensure the alarm time is correct. |
| Feil tid eller dato. | Time/date not set correctly after power loss or initial setup. | Follow instructions in Section 6.2 to reset time and date. Replace CR2032 memory battery if settings are frequently lost. |
| Knappene reagerer ikke. | Midlertidig programvarefeil. | Trykk på TILBAKESTILL key on the back of the clock. |
9. Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modellnummer | Luqeeggxwrao5h2y8620 |
| Materiale | Engineered Wood, PVC |
| Farge | White Log (bûche blanche) |
| Funksjoner | Time, Temperature, Date, Alarm, Memory, Brightness Adjustment |
| Visningstype | Digital LED |
| Lysstyrkenivåer | 3 |
| Strømkilde | Battery Powered (3 AAA, 1 CR2032 for memory) / USB Powered |
| Tilkoblingsteknologi | USB |
| Monteringstype | Bordplate |
| Gjenstandsform | Rektangulær |
| Dimensjoner (pakke) | 9.9 x 8 x 7.5 cm |
| Vekt (pakke) | 157 gram |
| Opprinnelsesland | Kina |
10. Garanti og støtte
This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions regarding the operation of your Luqeeg Digital Wooden Alarm Clock, please contact the retailer or manufacturer's customer service. Please have your model number (Luqeeggxwrao5h2y8620) and purchase information ready when contacting support.