Weiser SmartCode Keypad Electronic Deadbolt Instruction Manual

1. Introduksjon

This manual provides detailed instructions for the installation, operation, and maintenance of your Weiser SmartCode Keypad Electronic Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the security features of your lock. This electronic deadbolt offers keyless entry with a backlit keypad, multiple user codes, and SmartKey re-key technology.

Figure 1: Weiser SmartCode Keypad Electronic Deadbolt (Exterior and Interior Units)

2. Sikkerhetsinformasjon

• Read all instructions completely before installing and operating the lock.
• Do not attempt to disassemble the lock. This may void the warranty.
• Bruk kun den angitte batteritypen (4 AA alkaliske batterier). Ikke bland gamle og nye batterier eller forskjellige typer batterier.
• Keep your user codes and master code confidential.
• Ensure the door frame is secure and the strike plate is properly installed for optimal security.

3. Inkluderte komponenter

Kontroller at alle delene er til stede før installasjonen starter:

Figure 2: Contents of the Box

• Utvendig deadbolt-montering
• Innvendig deadbolt-montering
• Justerbar lås
• Streikeplate
• Snipp
• Monteringsplate
• Installasjonsutstyr (skruer)
• 2 Weiser-nøkler
• SmartKey-verktøy
• Installasjonsveiledning (denne håndboken)

4. Oppsett og installasjon

The Weiser SmartCode Keypad Electronic Deadbolt is designed for easy installation. For detailed, interactive 3D instructions with voice and video guidance, it is recommended to use the free BILT app.

4.1 Dørkompatibilitet

This deadbolt is compatible with standard doors measuring 1-3/8" to 1-3/4" (35mm to 44mm) thick. It features an adjustable backset for both 2-3/8" (60mm) and 2-3/4" (70mm) settings. It is suitable for most exterior and interior residential doors.

4.2 Installasjonstrinn (overview)

1. Klargjør døren: Ensure your door is properly prepped with the correct bore holes and backset.
2. Installer låsen: Insert the adjustable latch into the door edge and secure it with screws. Adjust the backset if necessary.
3. Installer det utvendige tastaturet: Route the cable from the exterior keypad through the door and position the keypad on the exterior side.
4. Installer monteringsplaten: Secure the interior mounting plate to the door, connecting it to the exterior keypad.
5. Installer den indre delen: Connect the cable from the exterior keypad to the interior assembly. Mount the interior assembly onto the mounting plate and secure it.
6. Installer batterier: Insert 4 AA alkaline batteries into the interior assembly.
7. Utfør dørhåndtaksprosessen: This step is crucial for the lock to learn the orientation of your door. Follow the specific instructions in the BILT app or the included quick start guide.

For detailed visual instructions, refer to the BILT app or the comprehensive installation guide included in the packaging.

Figure 3: Suitable Applications for the Deadbolt

5. Bruksanvisning

5.1 Låse døren

• Ett-trykks låsing: Press the Lock button (padlock icon) on the keypad. The deadbolt will extend, securing the door.
• Automatisk låsefunksjon: The lock can be programmed to automatically re-lock after a set period (e.g., 30 seconds) after unlocking. Refer to the programming section for details on enabling/disabling this feature.

Figure 4: One-Touch Auto-Lock in Action

5.2 Låse opp døren

• Bruk av brukerkode: Enter your personalized 4-8 digit user code on the keypad. The deadbolt will retract, unlocking the door.
• Bruk av en nøkkel: Insert the physical key into the keyway and turn to unlock.

Figure 5: Keyless Entry via Keypad

5.3 Keypad Features

• Bakgrunnsbelyst tastatur: The keypad illuminates for increased visibility in low-light conditions and remains lit for 30 seconds after inactivity.

Figure 6: Backlit Keypad for Low Light Conditions

5.4 Programmering av brukerkoder

The lock supports up to 50 unique user access codes and one master code. The master code is used for programming and managing user codes.

Figure 7: Multiple User Access Codes Feature

Refer to the full programming instructions in the included guide for detailed steps on adding, deleting, and modifying user codes and the master code.

5.5 SmartKey Re-Key Technology

SmartKey Security allows you to re-key your lock yourself in seconds, providing flexibility and control over your keys. This is useful in situations such as moving to a new home, losing keys, or managing multiple doors with a single key.

Figur 8: SmartKey-omkodingsprosess

To re-key your lock:

1. Insert your functioning key (the key that currently operates the lock) and turn it 90 degrees clockwise.
2. Sett SmartKey-verktøyet helt inn i SmartKey-hullet.
3. Fjern SmartKey-verktøyet.
4. Fjern funksjonstasten.
5. Insert your new key fully and turn it 180 degrees counter-clockwise.
6. Fjern den nye nøkkelen. Låsen er nå omkodet til den nye nøkkelen.

6. Vedlikehold

6.1 Batteribytte

The deadbolt operates on 4 AA alkaline batteries. When the batteries are low, the lock will provide an audible and/or visual low battery warning. Replace all four batteries simultaneously with new, high-quality alkaline batteries.

Figure 9: Battery Compartment and 12-Month Battery Life

Expected battery life is approximately 12 months under normal usage conditions.

6.2 Rengjøring

Rengjør låsen med en myk klutamp klut. Unngå bruk av slipende rengjøringsmidler eller løsemidler, da disse kan skade overflaten og de elektroniske komponentene.

7. Feilsøking

If you encounter issues with your Weiser SmartCode deadbolt, refer to the following common troubleshooting steps:

• Låsen svarer ikke: Sjekk batterinivået og bytt om nødvendig. Sørg for at batteriene er satt inn med riktig polaritet.
• Tastaturet lyser ikke: Bytt batterier. Kontakt kundestøtte hvis problemet vedvarer.
• Lock not locking/unlocking: Perform the door handing process again. Check for any obstructions in the door frame or latch. Verify user codes are correctly programmed.
• Difficulty re-keying: Ensure the functioning key is fully inserted and turned 90 degrees. Make sure the SmartKey tool is fully inserted into the hole.
• Frequent low battery warnings: Ensure you are using new, high-quality alkaline batteries. Extreme temperatures can affect battery performance.

For more complex issues, consult the full troubleshooting guide available on the Weiser webnettstedet eller kontakt kundestøtte.

8. Spesifikasjoner

Figur 10: Produktdimensjoner

9. Garantiinformasjon

This Weiser SmartCode Keypad Electronic Deadbolt comes with a 1-year warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Weiser webnettstedet.

10. Støtte

For further assistance, technical support, or to purchase replacement parts, please contact Weiser customer service. Contact information can typically be found on the Weiser webnettstedet eller i emballasjematerialene.

Du kan også besøke Weiser-butikken på Amazon for ytterligere produktinformasjon og ressurser.