Phanteks Eclipse G500A DRGB Mid Tower Case User Manual

1. Produktet er overview

The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.

Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.

Nøkkelfunksjoner:

• Høy luftstrømsdesign: Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
• Integrated D-RGB Lighting: Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
• Forhåndsinstallerte vifter: Includes three high-performance M25-140 D-RGB fans.
• Omfattende kjølestøtte: Supports up to 420mm radiators in the front and 360mm in the top.
• Romslig interiør: Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
• Fleksibel lagring: Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
• Modern Front I/O: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.

2. Oppsett og installasjon

This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.

2.1 Klargjøring av chassiset

Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.

Figure 2: The removable front panel allows for easy installation of fans and radiators.

Figure 3: The removable top mesh panel facilitates fan and radiator installation.

2.2 Hovedkortinstallasjon

The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.

2.3 Installasjon av strømforsyningsenhet (PSU).

Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).

2.4 Installasjon av lagringsenhet

The case offers extensive storage options:

• 2.5" SSD-er: Up to 9 dedicated 2.5" drive bays are included.
• 3.5" harddisker: Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.

Figure 4: Multiple storage options for 2.5" and 3.5" drives.

2.5 Installasjon av grafikkort (GPU)

The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.

2.6 Installasjon av kjølesystem

The chassis supports various fan and radiator configurations:

• Fansstøtte:
  • Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
  • Top: 3x 120mm or 3x 140mm
  • Bak: 1x 120mm eller 1x 140mm
• Støtte for væskekjøleradiator:
  • Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
  • Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
  • Bak: 120mm

Figure 5: High-end cooling compatibility with various fan and radiator sizes.

2.7 Kabelhåndtering

The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.

2.8 Installasjonsvideoer

3. Bruksanvisning

3.1 Frontpanel for I/O

Frontpanelet for I/O gir enkel tilgang til viktige porter og kontroller:

• Strømknapp: For å slå systemet av/på.
• USB 3.0-porter (x2): For tilkobling av USB 3.0-enheter.
• USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
• Mikrofon-/hodetelefonkombinasjonskontakt: For lydinngang og -utgang.
• D-RGB-modusknapp: Cycles through pre-programmed D-RGB lighting effects.
• D-RGB-fargeknapp: Endrer fargen på D-RGB-belysningen.

Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.

3.2 D-RGB Lighting Control

The integrated D-RGB lighting can be controlled in two ways:

• Manuell kontroll: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
• Hovedkortsynkronisering: Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.

Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.

4. Vedlikehold

Regelmessig vedlikehold bidrar til å sikre optimal ytelse og levetid for PC-komponentene dine.

• Dust Filtration: The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
• Innvendig rengjøring: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Utvendig rengjøring: Tørk av de utvendige overflatene med en myk, damp klut. Unngå slipende rengjøringsmidler eller løsemidler.

5. Feilsøking

Denne delen tar for seg vanlige problemer du kan støte på med PC-kabinettet ditt.

5.1 Strømproblemer

• Systemet slår seg ikke på:
  • Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Kontroller at strømforsyningsbryteren er i «PÅ»-posisjon.
  • Check that the front panel power switch cable is correctly connected to the motherboard's F_PANEL header.

5.2 D-RGB Lighting Issues

• D-RGB not lighting up or incorrect colors:
  • Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
  • If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
  • Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
  • Try cycling through modes and colors using the front I/O buttons to rule out software issues.

5.3 Viftestøy eller -feil

• For mye viftestøy:
  • Check for dust buildup on fan blades and clean if necessary.
  • Ensure fans are securely mounted and not vibrating against the chassis.
  • Verify fan speeds are controlled appropriately by the motherboard or fan controller.
• Viften snurrer ikke:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure fan headers are enabled in the BIOS/UEFI settings.

6. Spesifikasjoner

Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.

7. Garanti og støtte

Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks webnettstedet eller kontakt deres kundeservice.

Kontaktinformasjon:

• Webnettsted: www.phanteks.com
• Phanteks Taiwan Inc.: 11F., nr. 150, Jian 1st Rd., Zhonghe Dist. Nye Taipei City 235
• Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
• Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States

Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).