AsperX AX4500 Jump Starter User Manual

1. Produktet er overview

The AsperX AX4500 is a versatile and powerful jump starter designed for emergency vehicle starting and portable power needs. It features a smart chip for improved efficiency and integrates multiple functions including car emergency start, flashlight, mobile device charger, and DC output power supply.

With a 4500A peak current, the AX4500 can start 12V vehicles with up to all gas engines and 10.0L diesel engines. It is capable of providing up to 70 jump starts on a single charge. The device is equipped with a 4-inch LCD display to show operational status and battery level, and offers over 10 types of safety protections for secure use in various temperatures (-4°F to 140°F).

Beyond jump starting, the AX4500 includes a PD30W Type-C input/output and a Quick Charge 3.0 USB port, allowing for rapid charging of mobile phones, tablets, and other electronic devices.

Image: AsperX AX4500 Jump Starter connected to a car battery.

2. Oppsett og første lading

Innledende lading

Before first use, fully charge your AsperX AX4500 Jump Starter. It is recommended to keep the battery level above 30% for optimal performance. If the device is not used for an extended period, charge it every three months to prolong its lifespan.

Hva er i esken

• AX4500 Car Jump Starter (x1)
• Jumper Cable (x1)
• USB Type-C ladekabel (x1)
• USB Type-A Charging Cable (x1)
• Storage Case (x1)
• Cigarette Lighter Adapter (x1)
• Brukerhåndbok (x1)

Image: All items included with the AsperX AX4500 Jump Starter.

3. Bruksanvisning

Hoppstart av et kjøretøy

1. Sett inn: Insert the jump cable into the booster port on the AsperX AX4500.
2. Koble til: Koble til den røde clamp til den positive (+) polen på bilbatteriet og den svarte clamp til den negative (-) terminalen.
3. Ferdig: The LED indicator on the jump cable will show a correct connection.
4. Start: Start bilmotoren din innen 30 sekunder.

Note: Hvis bilbatteriet voltage is extremely low (below 0V), you may need to press the "BOOST" button on the jumper cable to force start the vehicle. This action temporarily bypasses some protection functions.

Image: Steps for jump starting a vehicle.

Lading av mobile enheter

Connect your mobile device to the AX4500 using a compatible USB Type-C or Quick Charge 3.0 USB cable. The device will automatically begin charging. The PD30W Type-C port and QC3.0 USB port provide fast charging capabilities.

Image: AsperX AX4500 charging mobile devices.

Bruke lommelykten

The AX4500 features a built-in flashlight with multiple modes: constant, strobe, and SOS. Press and hold the flashlight button to turn it on. Subsequent presses will cycle through the modes. This feature is useful for roadside emergencies or working in low-light conditions.

Image: AsperX AX4500 flashlight in use.

4. Vedlikehold

• Vanlig lading: To maintain battery health and extend the lifespan of your jump starter, ensure it is charged at least once every three months, especially if not in regular use.
• Lagring: Store the device in its provided storage case in a cool, dry place away from direct sunlight and extreme temperatures.
• Rengjøring: Bruk en myk, tørr klut til å rengjøre utsiden av jumpstarteren. Ikke bruk sterke kjemikalier eller slipende materialer.
• Automatisk avslutning: The jump starter is designed to automatically shut down after use to conserve power.

5. Feilsøking

• Enheten slår seg ikke på: Ensure the device is sufficiently charged. If the battery level is very low, connect it to a power source.
• Kjøretøyet starter ikke:
  • Check that the jumper cables are securely connected to the correct battery terminals (red to positive, black to negative).
  • Sørg for at starthjelpen har minst 30 % ladenivå.
  • If the vehicle battery is completely dead (0V), press the "BOOST" button on the jumper cable to initiate a forced start.
  • Verify that the vehicle is in neutral or park and the handbrake is engaged.
• Sikkerhetsbeskyttelse: The AX4500 includes multiple safety features such as over-charge, short circuit, reverse polarity, low/high temperature, over-voltage, and overload protection. If the device detects an unsafe condition, it may prevent operation. Refer to the LCD display for error codes or indicators.

6. Spesifikasjoner

7. Garanti og støtte

The AsperX AX4500 Jump Starter comes with 2-Years Technical Support. For any after-sales questions or assistance with your starter battery pack, please contact AsperX customer support. Refer to the contact information provided in the included user manual or on the official AsperX webnettstedet.