DOOMAY Rechargeable Digital Kitchen Timer User Manual

1. Introduksjon

Thank you for choosing the DOOMAY Rechargeable Digital Kitchen Timer. This versatile device combines a large LED display timer with an alarm clock function, designed for various time management needs in the kitchen, classroom, office, and more. Its key features include adjustable brightness and volume, sound activation, and a magnetic back for convenient placement.

Figure 1: DOOMAY Rechargeable Digital Kitchen Timer

Figure 2: Key features of the DOOMAY Digital Timer

2. Oppsett

2.1 Charging the Timer

The DOOMAY Digital Timer comes with a built-in rechargeable battery. Before first use, or when the low power icon appears on the display, charge the device using the provided USB-C cable.

• Connect the USB-C end of the cable to the timer's charging port (DC 5V).
• Connect the USB-A end to a standard USB power adapter (output 5V/1A recommended, not included) or a computer USB port.
• A charging indicator may appear on the screen. The timer is fully charged when the indicator changes or disappears.

Figure 3: Charging the timer and low battery indicator

2.2 Plasseringsalternativer

The timer offers flexible placement options:

• Magnetisk feste: The timer features strong magnets on its back, allowing it to be securely attached to metallic surfaces like refrigerators or whiteboards. Two rubber pads are included to prevent slipping.
• Desktop plassering: The timer can also be placed on any flat surface, such as a kitchen counter, desk, or bedside table.

Figure 4: Magnetic attachment feature

3. Bruksanvisning

3.1 Overview av kontroller

The timer features intuitive buttons on its top surface for easy operation. Refer to Figure 5 for button identification.

Figure 5: Timer controls and display features

• M/+ Button: Increases minutes or digits.
• S/- Button: Decreases seconds or digits.
• CLEAR-knapp: Clears the set time to 00:00.
• MODUS-knapp: Switches between Timer, Clock, and Alarm modes.
• ST/SP Button: Starts or pauses the timer/alarm.

3.2 Timer Function (Countdown/Count Up)

The timer supports both countdown and count-up functions, up to 199 minutes and 59 seconds.

• Setting Countdown Time: In Timer mode, use the M/+ and S/- buttons to set the desired time. Press CLEAR to reset.
• Starting/Pausing: Press ST/SP to start the countdown. Press again to pause.
• Opptellingsfunksjon: When the timer is at 00:00, press ST/SP to start counting up.
• Last Minute Indication: During countdown, all digits will turn red when less than 1 minute remains, providing a clear visual alert.
• Tilbakestilling av alarm: When the alarm rings, press any button to stop it and return to your last set time.

Figure 6: Countdown and Count-up functions

Figure 7: Digits turn red during the last minute of countdown

3.3 Klokke- og alarmfunksjoner

The timer can also function as a digital clock and a single alarm.

• Bytte modus: Press the MODE button to cycle through Timer, Clock, and Alarm modes.
• Stille inn klokketid: In Clock mode, use M/+ and S/- to adjust hours and minutes.
• Stille inn alarm: In Alarm mode, use M/+ and S/- to set the alarm time. Press ST/SP to activate/deactivate the alarm.

Figure 8: Timer used as an alarm clock

3.4 Justering av lysstyrke og volum

Customize the display brightness and alarm volume to suit your environment.

• Lysstyrke: Use the switch on the side of the timer to select between High, Low, or Off display brightness.
• Volum: Use the switch on the side of the timer to select between Loud (80-90dB), Soft (60-70dB), or Mute alarm volume. When set to Mute, the time will flash without an audible alarm.

Figure 9: Three levels of display brightness

Figure 10: Three levels of alarm volume

3.5 Sound-Activated Display (Power Saving)

To conserve battery, the display will automatically go into sleep mode after 30 seconds of quiet when powered by battery. It can be reactivated by sound (e.g., a clap) or by pressing any button.

Note: When the timer is actively running a countdown or count-up, the display will remain on for continuous visibility. If using the device primarily as a clock, it is recommended to keep it plugged in to ensure the display remains continuously active.

Figure 11: Sound-activated display for power saving

3.6 Minnefunksjon

The timer has a memory function that recalls the last set time. If you stop a timer and then press the CLEAR button, it will return to the previously set time, allowing for quick reuse of common intervals.

Figure 12: Memory function for recalling last set time

3.7 Offisiell produktvideo

4. Vedlikehold

4.1 Rengjøring

To clean the timer, gently wipe the surface with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Do not use abrasive cleaners or immerse the device in water.

4.2 Batteristell

To prolong battery life, avoid fully discharging the timer frequently. Charge the device when the low power icon appears. If storing the timer for an extended period, ensure it is fully charged before storage and recharge it every few months.

5. Feilsøking

6. Spesifikasjoner

7. Garanti og støtte

DOOMAY is committed to providing quality products. For any questions, concerns, or support needs regarding your DOOMAY Rechargeable Digital Kitchen Timer, please contact our customer service. You can find contact information and additional resources by visiting the official DOOMAY store on Amazon:

Visit the DOOMAY Store on Amazon

Vennligst ta vare på kjøpskvitteringen av garantihensyn.