1. Introduksjon og overview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
Nøkkelfunksjoner inkluderer:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- Mobile Power Supply: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- LED-lysfunksjoner: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
2. Oppsett og første gangs bruk
2.1 Lading av enheten
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. Bruksanvisning
3.1 Hoppstart av et kjøretøy
- Sørg for at startmotoren er fulladet.
- Koble til smartbatteriet clamp to the jump starter.
- Fest den røde (+) clamp til den positive polen på kjøretøyets batteri.
- Fest den svarte (-) clamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Start kjøretøyets motor.
- Når kjøretøyet starter, fjern umiddelbart dekselet.amps from the vehicle battery, then disconnect the smart battery clamp fra startmotoren.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
3.2 Bruk av luftkompressoren
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
3.3 Bruk som powerbank
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- USB-utgang 1: 5V=3A, 9V=2A, 12V=1.5A
- USB-utgang 2: 5V=2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
3.4 LED Light Functions
The device includes multiple LED light modes:
- Stabilt lys: For generell belysning.
- SOS-modus: For nødsignalering.
- Strobe lys: For attracting attention.
Press the light button to cycle through the different modes.
4. Vedlikehold
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- Vanlig lading: Recharge the device every 3-6 months, even if not in use, to maintain battery health.
- Lagring: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- Rengjøring: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive materials.
- Kabelinspeksjon: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
5. Feilsøking
Se tabellen nedenfor for vanlige problemer og løsningene på dem:
| Feilmelding | Forårsake | Løsning |
|---|---|---|
| FEIL | Jumper cables connected with reversed polarity to the car battery. | Koble til batteri clamps to the correct positive and negative terminals. |
| LAV | Riktig tilkoblet bilbatteri, men batterivoltage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| UT INN | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| START | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| START | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. Spesifikasjoner
Detailed technical specifications for the Enthuze ENT-TD6000:
| Parameter | Verdi |
|---|---|
| Produktnavn | Jumpstarter med luftkompressor |
| Modell | ENT-TD6000 |
| Størrelse | 193 x 110 x 53 mm |
| Inflasjonstrykkområde | 0.2-8bar / 3-120psi |
| Driftstemperatur | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| Lagringstemperatur | -10°C~50°C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| Batterikapasitet | 41.44Wh (14.8V, 2.8Ah) |
| Arbeidsstøy | Mindre enn 80dB unna 1 meter |
| Ladeinngang | 5V=3A |
| Ladetid | Ca 3.5 timer |
| USB-utgang 1 | 5V=3A, 9V=2A, 12V=1.5A |
| USB-utgang 2 | 5V=2.1A |
| Air Pressure Sensor Accuracy | ± 1 psi |
| Start Car Voltage | 12V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. Viktige sikkerhetsadvarsler
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- Lad det interne batteriet kun i et godt ventilert område.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- Risiko for personskade. Ikke bruk dette produktet hvis strømledningen eller batterikablene er skadet på noen måte.
- Denne enheten er ikke beregnet for bruk i et kommersielt reparasjonsanlegg.
- Denne enheten er ment å oppbevares innendørs når den ikke er i bruk. Denne enheten skal ikke lagres eller etterlates utendørs når den ikke er i bruk.
- Denne enheten er beregnet for midlertidig bruk utendørs, og rimelig forsiktighet bør utvises når du bruker denne enheten under våte forhold.
8. Garanti og støtte
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.