Brukerhåndbok for AURA Livac 114R sugemaskin

1. Introduksjon

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your AURA Livac 114R Suction Machine. Please read this manual thoroughly before using the appliance and retain it for future reference.

The AURA Livac 114R is a versatile cleaning appliance designed for dust and water suction, carpet washing, and blower functions, offering powerful cleaning capabilities for various household and commercial needs.

2. Sikkerhetsinstruksjoner

WARNING: To reduce the risk of fire, electric shock, or injury, read and follow all instructions carefully.

• Always disconnect the power cord from the electrical outlet before servicing.
• Do not use the appliance on wet surfaces when operating in dry mode.
• Ikke plukk opp brennbare eller brennbare væsker, for eksempel bensin, eller bruk i områder der de kan være tilstede.
• Ikke plukk opp noe som brenner eller ryker, for eksempel sigaretter, fyrstikker eller varm aske.
• Hold hår, løse klær, fingre og alle deler av kroppen unna åpninger og bevegelige deler.
• Bruk kun som beskrevet i denne håndboken. Bruk kun produsentens anbefalte tilbehør.
• Ikke bruk med skadet ledning eller støpsel. Hvis apparatet ikke fungerer som det skal, har blitt mistet i bakken, skadet, etterlatt utendørs eller mistet i vann, må det returneres til et servicesenter.
• Ikke trekk eller bær i ledningen, bruk ledningen som håndtak, lukk en dør på ledningen, eller trekk ledningen rundt skarpe kanter eller hjørner. Ikke kjør apparatet over ledningen. Hold ledningen unna oppvarmede overflater.
• Ikke koble fra ved å trekke i ledningen. For å koble fra, ta tak i støpselet, ikke ledningen.
• Ikke håndter støpselet eller apparatet med våte hender.
• Slå av alle kontroller før du trekker ut støpselet.

3. Produktkomponenter

The AURA Livac 114R Suction Machine includes the following main components:

• Main Unit (Motor housing, dust/water container)
• Fleksibel slange
• Forlengelsestav
• Teppevaskdyse
• Støvfilter
• Water Tank (for carpet washing solution)
• Strømledning

Figur 1: Overview of the AURA Livac 114R Suction Machine, showing the main unit, flexible hose, and carpet washing nozzle attachment.

4. Oppsett og montering

4.1 Utpakking

Carefully remove all components from the packaging. Check for any damage during transit. Ensure all parts listed in Section 3 are present.

4.2 Attaching the Flexible Hose

1. Locate the suction inlet on the main unit.
2. Insert the flexible hose connector firmly into the inlet until it clicks into place.

4.3 Attaching Extension Wands and Nozzles

1. Connect the desired number of extension wands to the end of the flexible hose.
2. Attach the appropriate nozzle (e.g., carpet washing nozzle, crevice tool, brush) to the end of the extension wand.

4.4 Preparing for Carpet Washing

1. Open the extra basin (3.5 L capacity) for the cleaning solution.
2. Fyll b-enasin with water and a suitable carpet cleaning solution according to the solution manufacturer's instructions. Do not overfill.
3. Ensure the pump connection is secure.

5. Bruksanvisning

5.1 Dry Vacuuming (Dust Suction)

1. Ensure the dust filter is correctly installed in the 5 L dust container.
2. Connect the flexible hose and appropriate dry vacuuming nozzle.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the power button (usually green or marked with 'I') to start the motor.
5. Flytt munnstykket over overflaten som skal rengjøres.
6. After use, press the power button to turn off the machine and unplug it.

5.2 Wet Vacuuming (Water Suction)

CAUTION: Remove the dust filter before wet vacuuming to prevent damage.

1. Fjern støvfilteret.
2. Ensure the 6 L waste basin is empty and properly secured.
3. Connect the flexible hose and a suitable wet vacuuming nozzle.
4. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
5. Trykk på strømknappen for å starte motoren.
6. Vacuum up spilled liquids. Do not exceed the maximum fill line of the waste basin.
7. After use, press the power button to turn off the machine and unplug it. Empty and clean the waste basin øyeblikkelig.

5.3 Carpet Washing Function

1. Prepare the cleaning solution in the 3.5 L extra basin som beskrevet i avsnitt 4.4.
2. Attach the carpet washing nozzle and ensure the spray hose is connected.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the main power button (for suction) and the pump power button (for spraying solution).
5. Spray the cleaning solution onto the carpet by pressing the trigger on the nozzle.
6. Immediately move the nozzle over the wet area to suction up the dirty solution.
7. Work in small sections, overlapping slightly.
8. After cleaning, run the machine with clean water to rinse the internal hoses and nozzle.
9. Turn off both power buttons and unplug the machine. Empty and clean all basins.

5.4 Viftefunksjon

1. Locate the blower outlet on the main unit (usually opposite the suction inlet).
2. Attach the flexible hose to the blower outlet.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Trykk på strømknappen for å aktivere viften.
5. Direct the airflow as needed for blowing dust or drying surfaces.
6. After use, press the power button to turn off the machine and unplug it.

6. Vedlikehold

Regular maintenance ensures optimal performance and extends the lifespan of your AURA Livac 114R.

6.1 Emptying and Cleaning the Dust/Waste Basin

• After each use, especially wet vacuuming or carpet washing, empty the 6 L waste basin.
• Skyll basin thoroughly with clean water and allow it to air dry completely before reassembling.

6.2 Rengjøring av støvfilteret

• For dry vacuuming, regularly check and clean the dust filter.
• Tap the filter gently to dislodge dust, or rinse with water if heavily soiled. Ensure it is completely dry before reinstallation.
• Skift filteret hvis det er skadet eller svært slitt.

6.3 Cleaning the Extra Basin (Solution Tank)

• After carpet washing, empty any remaining cleaning solution.
• Rinse the 3.5 L extra basin with clean water to prevent residue buildup.

6.4 Cleaning Hoses and Nozzles

• Rinse all hoses and nozzles with clean water after wet use to prevent blockages and odors.
• Ensure they are dry before storage.

6.5 Oppbevaring

Store the appliance and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.

7. Feilsøking

8. Spesifikasjoner

• Modell: Livac 114R
• Merke: AURA
• Maks. Motor kraft: 2000 W
• Sugekraft: 1950 mmH2O
• Voltage: 220-240 V AC
• Hyppighet: 50/60 Hz
• Luftstrøm: 200 m³/t
• Sugekapasitet: 1.5 l/s
• Pumpekraft: 26 W
• Pumpetrykk: 2.5 bar
• Waste Basin Volum: 6 L
• Støvbeholder kapasitet: 5 L
• Extra Basin Volume (Solution Tank): 3.5 L
• Varevekt: 8 kg (Package Dimensions: 54 x 50.7 x 44.7 cm; 8 kg)
• Spesielle funksjoner: Dry, Wet, Carpet Washing, Blower Function

9. Garanti og støtte

For warranty information and customer support, please refer to the warranty card included with your product or visit the official AURA webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis.

For technical assistance or spare parts, contact AURA customer service through the details provided in your product documentation.