Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe Instruction Manual

1. Introduksjon

This manual provides essential information for the safe and efficient operation of your Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe. Please read these instructions carefully before installation and use. The safe is designed to provide high security for your valuables with thick steel construction, fire protection, and multiple access options.

Figur 1: Foran view of the Barska AX13744 Biometric Safe.

2. Sikkerhetsinformasjon

• Oppbevar alltid nødnøkler på et trygt sted, borte fra safen. Ikke oppbevar dem inne i safen.
• Sørg for at safen er forsvarlig montert for å forhindre uautorisert fjerning.
• Do not expose the safe to extreme temperatures or humidity beyond its specified operating conditions.
• Regularly check battery levels to ensure proper function of the electronic lock.
• Keep the safe door closed and locked when not in use.

3. Pakkens innhold

Bekreft at alle varene som er oppført nedenfor er inkludert i pakken din:

• Barska AX13744 Safe Unit
• 2 Adjustable Shelves with Shelf Brackets
• 4 AA batterier
• Mounting Hardware (bolts, anchors)
• Set of Emergency Back-Up Keys (2 keys)

Figure 2: Included components and product dimensions.

4. Oppsett

4.1. Installasjon av batteri

1. Finn batterirommet på innsiden av safedøren.
2. Insert the 4 AA batteries (included) according to the polarity indicators (+/-).
3. Lukk batteridekselet godt.

4.2. Initial Access and Opening

Upon first use, open the safe using the emergency keys:

1. Locate the keyhole cover on the electronic keypad.
2. Fjern dekselet for å avdekke nøkkelhullet.
3. Sett inn en av nødnøklene og vri den med klokken samtidig som du vrir håndtaket for å åpne safedøren.
4. Once open, you can proceed with programming fingerprints and PIN codes.

4.3. Montering av safen

The safe is designed for floor mounting to enhance security. Use the provided mounting hardware.

1. Choose a suitable location for the safe, ensuring a stable surface.
2. Mark the pre-drilled mounting points on the floor through the safe's base.
3. Drill pilot holes into the floor at the marked locations.
4. Position the safe over the holes and secure it using the provided bolts and anchors.
5. Sørg for at safen er godt festet og ikke vingler.

Figur 3: Interiør view of the safe with adjustable shelves.

5. Bruksanvisning

5.1. Biometric Fingerprint Access

The safe can store up to 160 distinct fingerprints.

1. To program a fingerprint, press the programming button located inside the safe.
2. Place your finger on the biometric scanner. The indicator light will confirm successful scanning.
3. Repeat the scan multiple times for better accuracy.
4. To open the safe, place a registered finger on the scanner. Once recognized, turn the handle to open.

5.2. Keypad PIN Code Access

The safe supports up to 2 unique PIN codes.

1. To program a PIN code, press the programming button inside the safe.
2. Enter your desired PIN code (4-8 digits) on the keypad, followed by the '#' key.
3. Repeat the process to confirm the PIN code.
4. To open the safe, enter your programmed PIN code followed by '#'. Once confirmed, turn the handle to open.

5.3. Nøkkeltilgang

In case of battery failure or forgotten codes, use the emergency keys as described in Section 4.2.

Figure 4: Emergency access using a 9V battery (not included).

5.4. Alarmsystem

• Motion Sensor Alarm: The safe features a programmable motion sensor alarm that will activate if the safe is disturbed.
• Låsemodus: The safe will enter a lockout mode after 3 incorrect PIN codes or 5 unsuccessful fingerprint scans.
• Programmable Silent Access Mode: This mode allows for discreet entry without audible feedback. Refer to the full manual for programming details.

5.5. Internt LED-lys

The safe is equipped with an internal LED light that illuminates the interior when the door is opened, improving visibility of contents.

5.6. Justerbare hyller

The two included shelves can be adjusted to different heights to accommodate various item sizes. Simply remove the shelf brackets, reposition them to the desired height, and reinsert the shelves.

6. Vedlikehold

• Rengjøring: Tørk av utsiden av safen med en myk klutamp klut. Unngå slipende rengjøringsmidler eller løsemidler.
• Batteribytte: Replace the AA batteries annually or when the low battery warning indicator appears. Use high-quality alkaline batteries.
• Låsemekanisme: Do not lubricate the lock mechanism. If the lock becomes stiff, contact customer support.

7. Feilsøking

8. Spesifikasjoner

Figure 5: Fire resistance features of the safe.

9. Garanti og støtte

For warranty information, please refer to the manufacturer's official website or contact Barska customer support directly. Replacement parts or accessories can also be requested through their webnettstedet.

Ofte stilte spørsmål:

• Are replacement parts or accessories available for this product if needed? Vennligst besøk vår website to request keys or replacement parts.