LOKITHOR J3250 PRO Jumpstarter brukerhåndbok

1. Introduksjon

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Sikkerhetsinformasjon

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Øyebeskyttelse: Always wear safety glasses when working with batteries.
• Ventilasjon: Bruk enheten i et godt ventilert område.
• Barn: Oppbevar enheten utilgjengelig for barn.
• Kortslutninger: Ikke la den røde og svarte clamps to touch each other or the same metal object.
• Revers polaritet: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• Fuktighet: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• Skader: Ikke bruk enheten hvis den er skadet. Kontakt kundestøtte for å få hjelp.
• Temperatur: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. Produktet er overview

3.1 Hva er i esken

• LOKITHOR J3250 PRO Jump Starter-enhet
• Jumper Starter Clamps
• USB-A til USB-C-kabel
• USB-C til USB-C-kabel
• 12V adapter
• Oppbevaringspose for tilbehør
• Brukerhåndbok

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Nøkkelfunksjoner

• High Starting Current: Leverer 3250 Amp peak current for reliable vehicle starting.
• Motorkompatibilitet: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• LiFePO4 Battery Technology: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• Avansert sikkerhet: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• 100W Two-way Fast Charging: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• ConnectMax Technology: Automatically detects clamp connection impedance to optimize starting efficiency.
• Bærbar Power Bank: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• 400-Lumen LED Flashlight: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• Slitesterk design: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• Lang ventetid: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. Oppsett og lading

4.1 Innledende lading

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Bruksanvisning

5.1 Starte et kjøretøy med startkabler (normal modus)

Use Normal Mode for vehicles with a partially discharged battery.

1. Fest Clamps: Koble til den røde (+) clamp to the positive terminal of the vehicle battery. Connect the black (-) clamp til den negative terminalen på bilbatteriet.
2. Strøm på: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. Start kjøretøy: Start kjøretøyet ditt.
4. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps fra kjøretøyets batteri.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. Fest rød Clamp: Koble til den røde (+) clamp til plusspolen på kjøretøyets batteri.
2. Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. Fest svart Clamp: Koble til den svarte (-) clamp til den negative terminalen på bilbatteriet.
4. Start kjøretøy: Start your vehicle within 30 seconds of activating Boost Mode.
5. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps fra kjøretøyets batteri.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Using as a Portable Power Bank

The J3250 PRO can charge various electronic devices.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• Enheten vil automatisk begynne å lade.

The J3250 PRO can charge multiple electronic devices.

5.4 Bruke LED-lommelykten

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Trykk én gang på lommelyktknappen for konstant lys.
• Press again to cycle through Strobe and SOS modes.
• Trykk en fjerde gang for å slå av lommelykten.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Vedlikehold

• Lad opp regelmessig: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• Lagring: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• Rengjøring: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp Omsorg: Sørg for at clamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7. Feilsøking

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• Enheten slår seg ikke på: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Kjøretøyet starter ikke (normal modus):
  • Sjekk at clamper ordentlig koblet til riktige batteripoler (rød til positiv, svart til negativ).
  • Ensure the vehicle battery terminals are clean and free of corrosion.
  • If the vehicle battery is completely dead, try using Boost-modus.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• Overoppheting av enheten: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• Ladeproblemer: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. Spesifikasjoner

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Garanti og støtte

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webnettstedet eller kontakt kundeserviceavdelingen direkte. Ta vare på kjøpskvitteringen som kjøpsbevis for garantikrav.

If you have any after-sales questions, please feel free to contact us.