Unitech TS100
Unitech TS100 2D Hands-Free Presentation Barcode Scanner
Brukerhåndbok
Introduksjon
This manual provides essential information for the proper setup, operation, and maintenance of your Unitech TS100 2D Hands-Free Presentation Barcode Scanner. Please read this manual thoroughly before using the device to ensure optimal performance and to prevent damage.
The Unitech TS100 is an omnidirectional USB wired desktop barcode reader designed for efficient and intuitive scanning of 1D and 2D barcodes, including PDF417 and Data Matrix, in retail and other point-of-sale environments.
Sikkerhetsinformasjon
- Do not expose the scanner to extreme temperatures, humidity, or direct sunlight.
- Unngå å miste skanneren eller utsette den for harde støt.
- Do not attempt to disassemble or modify the scanner. This will void the warranty.
- Bruk kun den medfølgende USB-kabelen for tilkobling.
- Keep the scanning window clean to ensure accurate barcode reading.
Pakkeinnhold
Vennligst sjekk innholdet i pakken for å sikre at alle varene er til stede:
- Unitech TS100 2D Presentation Barcode Scanner
- USB-kabel
- Hurtigstartveiledning (hvis aktuelt)
Produkt overview
The Unitech TS100 features a compact design with a large scan window for easy barcode presentation. Its omnidirectional scanning capability allows for quick and efficient data capture.
Figure 1: Unitech TS100 2D Presentation Scanner highlighting its large scan window, auto-sensing mode, 1D & 2D barcode scanning, and multiple scanning modes.
Figur 2: Foran view of the Unitech TS100 scanner, showing the blue scanning window and the Unitech logo.
Figur 3: Bakside view of the Unitech TS100 scanner, displaying the product label with model number TS100-SUCB00-SG and power specifications.
Oppsett
Follow these steps to set up your Unitech TS100 barcode scanner:
- Pakk ut skanneren: Carefully remove the TS100 scanner and its accessories from the packaging.
- Koble til USB-kabelen: Insert the USB cable into the port at the back of the scanner.
- Koble til vertsenhet: Plug the other end of the USB cable into an available USB port on your computer, laptop, or POS system.
- Driverinstallasjon: The scanner is typically plug-and-play. Your operating system should automatically detect and install the necessary drivers. Wait for the installation to complete.
- Strøm på: The scanner will power on automatically once connected to a powered USB port. A beep and/or LED indicator will confirm it is ready for use.
Bruksanvisning
The Unitech TS100 is designed for hands-free operation, offering multiple scanning modes for various applications.
Grunnleggende skanning
- Place the barcode within the scanner's field of view, facing the scanning window.
- The scanner will automatically detect the barcode and emit a successful scan indication (e.g., a beep and/or green LED).
- The scanned data will be transmitted to your connected host device as keyboard input.
Skannemoduser
The TS100 supports multiple scanning modes to optimize performance for different barcode types and environments:
- Normal modus: Standard scanning for most 1D and 2D barcodes.
- Smartphone Mode: Optimized for reading barcodes displayed on smartphone screens, which can sometimes be reflective.
- Rask modus: Designed for faster scanning of multiple barcodes in quick succession.
Refer to the full programming manual (available on the Unitech website) for instructions on how to switch between these modes using configuration barcodes.
Vedlikehold
Proper maintenance ensures the longevity and performance of your scanner:
- Rengjøring av skannevinduet: Bruk en myk, lofri klut lett damprengjøres med vann eller et mildt, ikke-slipende rengjøringsmiddel. Ikke bruk sterke kjemikalier eller slipende materialer.
- Rengjøring utvendig: Tørk av utsiden av skanneren med en myk, tørr klut.
- Lagring: Når skanneren ikke er i bruk, må den oppbevares på et rent og tørt sted, unna direkte sollys og ekstreme temperaturer.
Feilsøking
If you encounter issues with your TS100 scanner, refer to the table below for common problems and solutions:
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Skanneren slår seg ikke på. | USB cable not properly connected or host device USB port is not powered. | Sørg for at USB-kabelen er ordentlig koblet til både skanneren og vertsenheten. Prøv en annen USB-port eller vertsenhet. |
| Skanneren leser ikke strekkoder. | Barcode is damaged, poorly printed, or not supported. Scanning window is dirty. Incorrect scanning mode. | Ensure the barcode is clear and undamaged. Clean the scanning window. Verify the barcode symbology is supported. Try switching scanning modes (e.g., Smartphone Mode for screen barcodes). |
| Skannede data er feil eller ufullstendige. | Poor barcode quality. Scanner configuration issues. | Ensure the barcode is clear. Refer to the programming manual for advanced configuration settings. |
| Skanneren piper, men ingen data overføres. | Host device not recognizing the scanner as a keyboard input. | Ensure the cursor is in a text field on your host device. Reconnect the USB cable. Restart the host device. |
Spesifikasjoner
Detailed technical specifications for the Unitech TS100 scanner:
| Trekk | Spesifikasjon |
|---|---|
| Sensor | Image Sensor with 1280x800 pixels |
| Belysning | 650nm RED LED |
| Skannehastighet | 60 fps |
| Skew Angle | Horizontal Angle: 50°; Vertical Angle: 35° |
| Pitch vinkel | ±65° |
| Rull vinkel | 360° |
| Optisk oppløsning | 1D: 4 mil; 2D: 6.7 mil |
| Printing Contrast Scale | 25 % |
| Grensesnitt | USB |
| Dimensjoner (L x B x H) | 4.1 tommer x 5.7 tommer x 2.7 tommer (105 mm x 146 mm x 70 mm) |
| Vekt | 12.1 oz / 345g (without cable) |
| 1D Symbologies Supported | UPC-A/E, EAN-8/13, UPC/EAN Supplementals, EAN-8 Extend, Code 128, Code 39, Code 93, Code 11, Interleaved 2 of 5, Matrix 2 of 5, Codabar, MSI Plessey, GS1 DataBar, China Postal, Korean Postal, etc. |
| 2D Symbologies Supported | PDF417, MicroPDF417, DataMatrix, DataMatrix-Inverse, Maxicode, QRcode, MicroQR, Aztec, Aztec Inverse, Han Xin, Han Xin Inverse |
| Indikator | LED, Buzzer |
| Driftstemperatur | 32 °F til 122 °F (0 °C til 50 °C) |
| Lagringstemperatur | -40 °F til 158 °F (-40 °C til 70 °C) |
| Relativ fuktighet | 0 % til 95 % ikke-kondenserende |
Garanti og støtte
The Unitech TS100 barcode scanner main unit comes with a 1 års garanti fra kjøpsdatoen. Denne garantien dekker defekter i materialer og utførelse ved normal bruk.
For technical support, warranty claims, or further assistance, please contact Unitech customer service or visit the official Unitech webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis for garantitjenester.
Unitech America Webnettsted: www.unitechamerica.com