waveshare USB to RS485/422 Industrial Grade Isolated Converter

1. Overview

The waveshare USB to RS485/422 Industrial Grade Isolated Converter is designed to facilitate reliable data transmission between computers and RS485/RS422 devices. It incorporates original FT232RL and SP485EEN chips for stable and fast communication, along with comprehensive protection features. This manual provides essential information for the proper setup, operation, and maintenance of the device.

Figur 1: Foran view of the waveshare USB to RS485/422 Industrial Grade Isolated Converter.

2. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• USB to RS485/422 Isolated Converter Unit
• USB-B-kabel
• Liten skrutrekker

Figure 2: Included items: the converter, a USB cable, and a screwdriver.

3. Funksjoner

The converter is equipped with advanced features for robust industrial applications:

• Original Chips: Onboard Original FT232RL and SP485EEN chips ensure fast, stable, and reliable communication with better compatibility.
• Strømisolering: Features unibody power supply isolation, providing stable isolated voltage without requiring an extra power supply for the isolated terminal.
• Digital Isolation: Incorporates unibody digital isolation for signal isolation, high reliability, strong anti-interference, and low power consumption.
• Transient Voltage Suppressor (TVS): Demper effektivt volumstøttage og transient spike voltage in the circuit, offering lightningproof and anti-electrostatic protection.
• Self-Recovery Fuse & Protection Diodes: Ensures stable current/voltage outputs, providing over-current/over-voltage proof and improving shock resistance.
• ESD & Surge Protection: Onboard 15KV ESD isolation protection and 600W lightningproof & anti-surge protection.
• Terminal Resistor: Onboard 120R terminal resistor on the RS485/RS422 ports, enabled by default and configurable via jumper.
• LED-indikatorer: Three LEDs indicate power (PWR), transmit data (TXD), and receive data (RXD) status.
• Industriell design: Industrial rail-mount ABS case design, compact, easy to install, and cost-effective.

Figure 3: The converter's industrial-grade design and isolation capabilities.

Figur 4: Overview of key features and the original FT232RL chip.

4. Beskyttelsesfunksjoner

The device is engineered with multiple layers of protection to ensure stable and safe operation:

• TVS (Transient Voltage Suppressor): Beskytter mot volumtage pigger.
• Self-Recovery Fuse: Automatically resets after an overcurrent event.
• Protection Diodes: Safeguard against over-current and over-voltage.
• ESD-beskyttelse: 15KV Electrostatic Discharge protection.
• Lightningproof & Anti-Surge Protection: 600W protection against lightning and power surges.

Figure 5: Visual representation of the converter's comprehensive protection mechanisms.

5. Grensesnittbeskrivelse

The converter features clearly labeled interfaces and indicators for ease of use:

• RS485/RS422 Interfaces: Screw terminals for connecting to RS485 (A+, B-, PE) or RS422 (PE, TA, TB, RA, RB) devices.
• USB & Power: USB-B port for connecting to the host computer, providing both data and power.
• LED-indikatorer:
  • PWR (rød): Illuminates when the USB connection is established and voltage er oppdaget.
  • TXD (Green): Blinks when the USB port sends data.
  • RXD (Blue): Blinks when the device ports receive data.

Figur 6: Detaljert view of the converter's interfaces and LED indicators.

6. Oppsett og installasjon

Follow these steps for proper setup and installation:

1. Koble til vert: Connect the converter to your computer's USB port using the provided USB-B cable. The PWR LED should light up.
2. Connect to RS485/RS422 Device: Use the screw terminals to connect your RS485 or RS422 device. Ensure correct polarity (A+, B- for RS485; PE, TA, TB, RA, RB for RS422).
3. Terminal Resistor Configuration: The onboard 120R terminal resistor is enabled by default. If your application requires it to be disabled, refer to the product's detailed documentation for jumper configuration.
4. Driverinstallasjon: Install the necessary drivers for the FT232RL chip on your operating system (Mac, Linux, Android, Windows 11/10/8.1/8/7). Drivers are typically available from the FTDI website or Waveshare's product page.
5. Montering: The converter features a rail-mount design, suitable for 35mm DIN rails, or can be wall-mounted using the integrated mounting holes.

Figure 7: The converter supports both wall-mount and rail-mount installations.

7. Bruksanvisning

Once connected and drivers are installed, the converter operates transparently, enabling bidirectional communication between your USB host and RS485/RS422 devices.

• Dataoverføring: The device supports point-to-multipoint communication for up to 32 nodes. For more than 16 devices, using repeaters is recommended to maintain signal integrity over longer distances.
• Sendingsavstand: The USB signal can be converted into a balanced differential RS485/422 signal. The transmission distance is approximately 1.2km for RS485/422, and about 5 meters for USB.
• Systemkompatibilitet: Compatible with a wide range of operating systems including Mac, Linux, Android, WinCE, and Windows (11, 10, 8.1, 8, 7).

Figure 8: The converter supports long-distance transmission and multiple operating systems.

8. Spesifikasjoner

9. Feilsøking

If you encounter issues with the converter, consider the following:

• Ingen strøm (PWR-lampen er av): Ensure the USB cable is securely connected to both the converter and the host computer. Try a different USB port or cable.
• Ingen dataoverføring (TXD/RXD-lampene blinker ikke): Verify that the correct drivers are installed for the FT232RL chip. Check the wiring to your RS485/RS422 device for correct polarity and secure connections. Confirm that the communication parameters (baud rate, data bits, stop bits, parity) match between your host and the connected device.
• Intermitterende tilkobling: Check for electromagnetic interference in the environment. Ensure cable lengths are within specified limits (5m for USB, 1.2km for RS485/422). For long RS485/422 networks or many nodes, consider using repeaters.
• Enhet gjenkjennes ikke: Reinstall the FTDI drivers. Try connecting to a different computer to rule out host-specific issues.

10. Vedlikehold

To ensure the longevity and optimal performance of your converter:

• Rengjøring: Bruk en myk, tørr klut til å rengjøre utsiden av enheten. Unngå å bruke flytende rengjøringsmidler eller løsemidler.
• Lagring: Store the converter in a cool, dry environment away from direct sunlight and extreme temperatures when not in use.
• Miljøforhold: Operate the device within the specified temperature (-15°C ~ 70°C) and humidity (5%RH ~ 95%RH) ranges.
• Kabeladministrasjon: Sørg for at kablene ikke er bøyd eller under for mye belastning for å unngå skade.

11. Garanti og støtte

For warranty information and technical support, please contact the manufacturer, Waveshare, directly. You may also find additional resources and updated drivers on their official webnettstedet.

Additional documentation for this product can be found via the following links:

• Brukerhåndbok (PDF)
• Brukerveiledning (PDF)