Atlanta Digital LED Alarm Clock 2604/0 User Manual

Introduksjon

Thank you for choosing the Atlanta Digital LED Alarm Clock, Model 2604/0. This alarm clock features a large, continuously illuminated white LED display, adjustable brightness, two separate alarms with crescendo function, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

Oppsett

1. Strømtilkobling

Connect the provided power adapter to the DC5V port on the back of the alarm clock. Plug the adapter into a standard 230V electrical outlet. The clock requires a permanent power connection for full functionality.

Image: The Atlanta Digital Alarm Clock shown with its included power adapter and USB connection cable.

2. Backup av batteri

The alarm clock includes an integrated CR2032 button cell battery (1 CR2032 - included). This battery serves as a backup to protect programmed data (time and alarm settings) in case of a power outage. It does not power the display or alarm functions independently.

Bilde: Bak view of the alarm clock, highlighting the battery compartment, DC5V input, USB port, and control buttons/sliders.

Bruksanvisning

1. Stille inn tid

1. Trykk og hold inne TIDEN SATT button (located on the right side of the back panel) for 2 seconds until the display flashes.
2. Bruk 12/24 timer button (left side of the back panel) to adjust the hours.
3. Trykk på TIDEN SATT button again to switch to minute adjustment. Use the 12/24 timer for å justere minuttene.
4. Trykk på TIDEN SATT knappen én gang til for å bekrefte og avslutte tidsinnstillingsmodus.

For å bytte mellom 12-timers og 24-timers visningsformat, trykk kort på 12/24 timer button when not in time setting mode.

Image: Front display of the alarm clock showing the time "12:50 PM".

2. Stille inn alarmen

Klokken støtter to separate alarmer.

1. Trykk og hold inne ALARM SETT button (located on the right side of the back panel, below TIME SET) for 2 seconds until the alarm time flashes.
2. Bruk 12/24 timer -knappen for å justere alarmens timer.
3. Trykk på ALARM SETT button again to switch to minute adjustment. Use the 12/24 timer -knappen for å justere alarmminuttene.
4. Trykk på ALARM SETT knappen én gang til for å bekrefte og avslutte alarminnstillingsmodus.
5. To activate or deactivate an alarm, briefly press the AL. PÅ/AV button (left side of the back panel, below 12/24HR). An indicator on the display will show if the alarm is active.

The alarm features a Crescendo function, meaning the alarm sound starts softly and gradually increases in intensity.

3. Snooze-funksjon

Når alarmen går, trykker du på den store SLUM button on the top of the clock. This will temporarily silence the alarm for 5 minutes. The alarm will resume after 5 minutes.

4. Justering av displayets lysstyrke

Adjust the display brightness using the MØRKERE slider located on the back panel. Slide it from "LOW" to "HIGH" to achieve your desired brightness level. The brightness is continuously adjustable.

5. Alarm Volume Adjustment

Adjust the alarm sound volume using the VOLUM slider located on the back panel. Slide it from "LOW" to "HIGH" to set the desired alarm volume. The volume is continuously adjustable.

6. USB -ladeport

A USB port is located on the back of the alarm clock. You can use this port to charge other devices, such as a mobile phone. Connect your device's USB charging cable to this port.

Vedlikehold

• To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Hold enheten unna vann og høy luftfuktighet.
• Unngå å utsette klokken for direkte sollys eller ekstreme temperaturer.
• If the backup battery needs replacement, ensure to use a CR2032 type battery.

Feilsøking

Display is too bright or too dim:

Juster MØRKERE slider on the back panel. While the brightness is continuously adjustable, some users may find the minimum brightness still too high for a dark bedroom.

Clock loses time or settings during a power outage:

Ensure the CR2032 backup battery is correctly installed and functional. The backup battery preserves settings but does not power the display or alarm during an outage. If the battery is old or depleted, replace it.

Alarmen lyder ikke:

• Check if the alarm is activated using the AL. PÅ/AV button. An indicator should be visible on the display.
• Sørg for at VOLUM slider is not set to "LOW" or minimum.
• Verify that the alarm time is set correctly.

USB charging port not working:

Ensure the alarm clock is properly connected to a power source. The USB port requires the clock to be powered. Check the charging cable of your device.

Spesifikasjoner

Garanti og støtte

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer.