1. Sikkerhetsinstruksjoner
- Les alle instruksjonene nøye før installasjon og bruk.
- Keep the product away from fire and extreme heat sources.
- Do not attempt to disassemble or modify the product. This may void the warranty and cause damage.
- Ensure the installation surface is stable and can support the weight of the light.
- Avoid placing the solar panel in shaded areas to ensure optimal charging.
- The product contains non-rechargeable batteries. Do not attempt to replace them unless specified by the manufacturer.
2. Pakkens innhold
Kontroller at alle komponentene er tilstede i pakken:
- COLBOR Vintage Outdoor Solar Wall Light (1 or 2 units, depending on purchase)
- E26/E27 LED Bulb (pre-installed or included separately)
- Monteringsskruer og veggankere
- Brukerhåndbok
3. Produktet er overview
The COLBOR Vintage Outdoor Solar Wall Light is designed for efficient and aesthetic outdoor illumination. It features a classic vintage style combined with modern solar technology.
Bilde: Basic Information and Dimensions of the COLBOR Solar Wall Light. Displays work rate (1W), lamp shell material (ABS), human body induction distance (1-5 meters), sensing angle (120 degrees), solar panel specifications (Polysilicon 6.5V/1.5W), bulb specification (DC-3V/1W, E27 LED warm light bulb), bulb interface (E26/E27 universal), charging time (6-8 hours in full sunlight), and applicable scenes.
Bilde: Key Components and Features of the Solar Wall Light. Highlights the 3 solar panels, intelligent motion detector, ON/OFF & Mode button, high-quality ABS material, transparent dust cover, and open-bottom design for easy bulb replacement and cleaning.
Nøkkelfunksjoner:
- Solcelledrevet: Equipped with multi-face solar panels for efficient charging (6-8 hours for full charge).
- Bevegelsessensor: High-sensitivity PIR motion sensor detects movement within 5 meters at a 120° angle.
- 3 lysmoduser: Offers versatile lighting options for different needs.
- IP65 vanntett: Constructed from high-quality ABS material, ensuring durability and performance in various weather conditions.
- Utskiftbar pære: Features an E26/E27 universal interface for easy bulb replacement.
- Enkel installasjon: No wiring required, simple 3-step installation.
4. Oppsett og installasjon
Follow these steps to install your COLBOR Solar Wall Light:
- Velg sted: Select a location that receives direct sunlight for 6-8 hours daily to ensure optimal charging. Avoid areas under eaves or trees that might block sunlight.
- Merk og bor: Use the light as a template to mark the positions for drilling holes on your wall. Drill holes and insert the provided wall anchors.
- Aktiver lys: Before mounting, locate the ON/OFF button and the Mode button (usually near the motion sensor). Press and hold the ON/OFF button for 3 seconds to turn on the light. Then, press the Mode button to select your desired lighting mode.
- Monter lyset: Align the light with the drilled holes and secure it using the provided screws.
Bilde: Installation Steps. Shows drilling holes, inserting plastic expansion anchors, pressing the ON/OFF button to activate, and finally installing the solar light.
Bilde: Optimal Solar Panel Placement. Emphasizes exposing the solar panel to direct sunlight for complete charging and avoiding other light sources shining on the panel at night.
Bulb Installation/Replacement:
The light uses an E26/E27 universal bulb interface. To install or replace the bulb:
- Gently unscrew the bottom part of the lamp to access the bulb socket.
- Screw in the E26/E27 LED bulb clockwise until secure.
- Fest den nederste delen av lamp.
Bilde: Replaceable Bulb Feature. Illustrates the E26/E27 universal bulb interface and examples of compatible bulb types.
5. Bruksanvisning
The COLBOR Solar Wall Light features 3 intelligent lighting modes. Press the 'Mode' button to cycle through them:
Bilde: 3 Lighting Modes. Visually explains how each mode functions with motion detection.
- Modus 1 (Demmet til lys): The light stays on at 30% brightness throughout the night. When motion is detected, it switches to 100% brightness for 15 seconds, then returns to 30% brightness.
- Mode 2 (Motion Activated): The light remains off. When motion is detected at night, it turns on at 100% brightness for 15 seconds, then automatically turns off if no further motion is detected.
- Mode 3 (Constant Dim): The light automatically turns on at night and stays on at a constant 30% brightness throughout the night, regardless of motion.
The light automatically turns off during the day and charges via its solar panels.
Bilde: Dusk to Dawn Outdoor Solar Wall Lights. Illustrates the light automatically turning off and charging during the daytime, and turning on and lighting at night.
6. Vedlikehold
- Rengjøring: Tørk solcellepanelet regelmessig med en myk klutamp klut for å fjerne støv, smuss eller rusk. Et rent solcellepanel sikrer effektiv lading.
- Undersøkelse: Periodically check the light for any signs of damage or loose components.
- Bytte av pære: If the LED bulb needs replacement, ensure the light is off and follow the bulb installation/replacement steps in Section 4.
- Batteri: The product uses non-rechargeable AA and lithium-ion batteries. Do not attempt to replace them. Contact customer support if you suspect a battery issue.
7. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Lyset slår seg ikke på om natten. | Utilstrekkelig sollys til lading. | Ensure the solar panel receives 6-8 hours of direct sunlight daily. Relocate if necessary. |
| ON/OFF button is off. | Trykk og hold inne PÅ/AV-knappen i 3 sekunder for å slå den på. | |
| Solcellepanelet er skittent. | Rengjør overflaten på solcellepanelet. | |
| Bevegelsessensoren fungerer ikke. | Sensoren er blokkert eller skitten. | Clear any obstructions and clean the sensor lens. |
| Light is in constant dim mode (Mode 3). | Press the Mode button to switch to Mode 1 or 2 for motion detection. | |
| Lyset forblir svakt eller slår seg raskt av. | Insufficient charge due to cloudy weather or poor solar panel placement. | Ensure optimal sunlight exposure. Allow several sunny days for a full charge. |
8. Spesifikasjoner
| Trekk | Spesifikasjon |
|---|---|
| Produktdimensjoner (L x B x H) | 28 x 23 x 15 cm (10.5L x 10.5W x 22.5H centimeters) |
| Vekt | 1.07 kilo |
| Materiale | Akrylnitrilbutadienstyren (ABS), polykarbonat (PC) |
| Stil | Vintage |
| Festeskjema | Lykt |
| Romtype | Utendørs |
| Spesifikke bruksområder for produktet | Courtyard, Garden, Patio |
| Innendørs/utendørs bruk | Utendørs |
| Strømkilde | Solcelledrevet |
| IP-vurdering | IP65 |
| Montering påkrevd | Ja |
| Batterier påkrevd | No (Batteries included are non-rechargeable and integrated) |
| Batteritype | 1 AA battery (non-rechargeable) and 1 Lithium-ion battery (non-rechargeable) |
| Inkluderte komponenter | Outdoor Solar Projector |
| Modellnummer | MOKCL-SW-SW2-SWLC |
9. Mediegalleri
Produktvideoer
Video: Produkt overview. This video showcases the COLBOR solar wall light, demonstrating its design and how it illuminates.
Video: New Solar Wall Lamps - Decorate Your Yard. This video demonstrates the aesthetic appeal and functionality of the solar wall lights in a garden setting.
Video: Outdoor Waterproof Wall Lamp Display. This video highlights the waterproof features of the outdoor wall lamp, showing its resilience to weather conditions.
Produktbilder
Bilde: Dustproof Cover Design and Good Weather-Proof. Showcases the light's IP65 waterproof, snow-prevention, and heat-resistant features, ensuring durability in various climates.
Bilde: Dustproof Design with 4 Transparent Covers. Compares the product's superior dustproof design, offering better protection against rain, dust, spiders, and insects compared to other designs.
Bilde: Applicable Scenes. Displays the versatility of the light, showing it installed in different outdoor settings such as villas, aisles, and fences, enhancing the ambiance.
10. Garanti og støtte
For warranty information or technical support, please refer to the seller's contact details provided at the point of purchase or visit the official COLBOR webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis.