CONTEC CMS50Q1 Fingertip Pulse Oximeter User Manual

1. Introduksjon

The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.

Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.

2. Produktet er overview

2.1 Nøkkelfunksjoner

• Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
• Accurate & Fast Results: Provides quick and precise measurements of SpO2 and pulse rate.
• Tøm skjerm: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
• Enkel betjening: Simple one-button operation for power on and measurement.
• Komfortabel design: Fingertip clip made with silica gel material for comfort.
• Lang batterilevetid: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.

2.2 Hva er i esken

• CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
• Snørebånd
• Brukerhåndbok
• Tegneserieklistremerker
• Skrutrekker (for batterirommet)

2.3 Produktkomponenter

This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.

3. Oppsett

3.1 Installasjon av batteri

1. Locate the battery compartment on the back of the oximeter.
2. Bruk den medfølgende skrutrekkeren til å løsne skruen på batteridekselet.
3. Skyv batteridekselet av.
4. Sett inn to AAA-batterier (ikke inkludert) i batterirommet, og sørg for at polariteten er riktig vei (+/-).
5. Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.

This image demonstrates the battery installation process and subsequent steps for taking a measurement.

3.2 Feste snoren

Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.

This image shows the device dimensions and how to attach the included lanyard.

4. Bruksanvisning

4.1 Ta en måling

1. Ensure the oximeter has batteries installed.
2. Open the clip of the oximeter.
3. Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
4. Press the power button once to turn on the oximeter.
5. Keep your hand still and avoid movement during the measurement.
6. The SpO2 and pulse rate readings will appear on the display within a few seconds.

4.2 Skjermretning

The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.

This image demonstrates the rotatable display feature of the oximeter.

4.3 Automatisk avslåing

The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.

5. Vis informasjon

The TFT display provides the following information:

• SpO2 (%): Blood Oxygen Saturation level.
• PRbpm: Pulse Rate in beats per minute.
• Søylediagram: A visual representation of pulse strength.
• Pulsbølgeform: A graphical representation of the pulse.
• Indikator for lavt batteri: An icon indicating when batteries need replacement.

This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.

6. Vedlikehold og stell

6.1 Cleaning the Oximeter

• Clean the surface of the oximeter before and after each use with a soft cloth dampened with medical alcohol (70% ethanol or isopropanol).
• Do not immerse the device in water or other cleaning solutions.
• Ensure the device is completely dry before reuse.

6.2 Batteribytte

When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.

6.3 Oppbevaring

Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.

7. Feilsøking

8. Spesifikasjoner

• Produktdimensjoner: 2.32 x 1.42 x 1.38 tommer
• Varevekt: 3.52 unser
• Measuring Range SpO2: 70-100 %
• Measuring Range Pulse Rate: 0-250 bpm
• Batterilevetid: Ca 20-30 timer
• Strømkilde: 2 x AAA-batterier (ikke inkludert)
• Automatisk avstenging: Etter 5 sekunders inaktivitet
• Produsent: Contec Medical Systems Co.,Ltd

9. Sikkerhetsinformasjon

• This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
• Do not use the oximeter during sports activities, as movement can affect accuracy.
• Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
• Avoid exposing the device to direct sunlight, high temperatures, or moisture.
• Ikke forsøk å reparere eller modifisere enheten selv. Kontakt kundestøtte hvis det oppstår problemer.

10. Støtteinformasjon

For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:

• Teknisk støttetelefon: +86-335-8015431
• E-post: contecmed@contecmed.com.cn
• Webnettsted: http://www.contecmed.com

Please refer to the official CONTEC webnettstedet eller kjøpsdokumentasjonen din for spesifikke garantivilkår.