Feit Electric LED Security Light Instruction Manual

1. Introduksjon

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH). This outdoor flood light features an adjustable three-head design, motion sensor, and dusk-to-dawn functionality, providing 5000 lumens of 5000K Daylight illumination.

Les disse instruksjonene nøye før installasjon, og ta vare på denne håndboken for senere referanse.

2. Sikkerhetsinformasjon

ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringen eller sikringsbryteren før installasjon eller service.

• Ensure the electrical supply is turned off before beginning installation.
• Dette produktet må installeres i samsvar med gjeldende installasjonskode av en person som er kjent med konstruksjonen og driften av produktet og farene involvert.
• Bruk kun UL/cUL-listede ledningskontakter.
• Ikke forsøk å modifisere armaturen. Eventuelle modifikasjoner kan ugyldiggjøre garantien og skape en sikkerhetsfare.
• The LED light source is integrated and cannot be replaced.

3. Pakkens innhold

Kontroller at alle delene er til stede før installasjonen starter:

• 1 x Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH)
• Monteringsutstyr (skruer, trådmuttere)

Image 3.1: Packaging of the Feit Electric LED Security Light, showing the product and key features.

4. Installasjonsinstruksjoner

This fixture is designed for wall-mount installation and requires hardwiring.

4.1 Nødvendig verktøy (ikke inkludert)

• Stjerneskrutrekker
• Wire strippere
• Tang
• Elektrisk tape
• Vernebriller

4.2 Montering av armaturet

1. Slå av strømmen ved strømbryteren eller sikringsskapet.
2. Remove the existing fixture (if applicable) and its mounting bracket.
3. Attach the new mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
4. Før de elektriske ledningene fra koblingsboksen gjennom det midterste hullet på monteringsplaten.

Image 4.1: Diagram illustrating the hands-free wiring and mounting back plate for easy installation.

4.3 Wiring the Fixture

1. Koble den svarte ledningen fra armaturen til den svarte (varme) ledningen fra koblingsboksen ved hjelp av en trådmutter.
2. Koble den hvite ledningen fra armaturen til den hvite (nøytrale) ledningen fra koblingsboksen med en trådmutter.
3. Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box using a wire nut.
4. Stikk alle ledninger forsiktig inn i koblingsboksen.

4.4 Feste armaturet

1. Align the fixture with the mounting plate and secure it with the provided screws.
2. Ensure the fixture is flush against the mounting surface to prevent water intrusion.
3. Adjust the three light heads to direct illumination as desired. The heads are adjustable to provide up to 270 degrees of light coverage.

Image 4.2: The security light showing its adjustable heads and the motion and dusk-to-dawn sensor controls.

Image 4.3: The Feit Electric LED Security Light installed on an exterior wall, providing bright illumination at night.

5. Bruksanvisning

This security light features both a motion sensor and a dusk-to-dawn sensor for automated operation.

5.1 Bevegelsessensorens funksjonalitet

• The integrated motion sensor detects movement up to 60 feet away.
• When motion is detected at night, the light will activate.
• The duration the light stays on after motion detection can be adjusted using the 'TIMER' dial on the sensor.
• The sensitivity of the motion sensor can be adjusted using the 'SENSITIVITY' dial to control the detection range.

5.2 Dusk-to-Dawn Functionality

• The built-in photocell sensor automatically turns the light on at dusk and off at dawn.
• This feature works in conjunction with the motion sensor, ensuring the light only activates when needed during nighttime hours.
• An 'Auto Dusk 'til Dawn override' feature is available, allowing the fixture to remain on continuously from dusk to dawn if desired. Consult the sensor control diagram for specific settings.

Image 5.1: Comparison showing the Feit Electric LED Security Light operating with its Dusk-to-Dawn feature, turning on automatically at night and off at dawn.

5.3 Justering av lysstyrke

The light output is dimmable from 500 lumens to 5000 lumens. This adjustment is typically controlled via the sensor unit, allowing you to set the desired brightness level for your security needs.

Image 5.2: Diagram illustrating the wide-beam optics of the security light, showing effective illumination distances at various heights.

6. Vedlikehold

The Feit Electric LED Security Light is designed for long-lasting, maintenance-free operation. The integrated LEDs have an average life of 50,000 hours and do not require replacement.

6.1 Rengjøring

• To clean the fixture, ensure power is off at the circuit breaker.
• Tørk av utsiden med en myk, damp klut. Ikke bruk slipende rengjøringsmidler eller løsemidler, da disse kan skade overflaten eller de elektriske komponentene.
• Keep the motion sensor lens clean to ensure optimal performance.

Image 6.1: The security light is shown enduring rain, highlighting its all-weather cast aluminum housing and wet-location rating (IP65).

7. Feilsøking

8. Spesifikasjoner

Image 8.1: Visual representation of key specifications including dimensions, CCT, wattage, brightness, life hours, IP rating, and voltage.

Image 8.2: The security light installed on a garage, featuring the Energy Star certification logo, indicating energy efficiency.

9. Garanti og støtte

9.1 Garantiinformasjon

According to the product information, there is no specific warranty description provided for this product.

9.2 Kundestøtte

For technical assistance or further inquiries, please visit the Feit Electric website or contact their customer service department. Refer to the product packaging for the most current contact information.