Intelbras GX 3000 Wireless Mesh Router User Manual

1. Introduksjon

The Intelbras GX 3000 is a multifunction wireless mesh router designed to provide high-speed internet connectivity via 5G/4G networks and Wi-Fi 6. This device integrates advanced Qualcomm technology for both its 5G modem and Wi-Fi 6 solution, ensuring high performance and reliability. It supports up to 128 devices simultaneously on the Wi-Fi network and offers wired connectivity options. The GX 3000 is suitable for various environments, from home to office, providing robust network performance.

This manual provides instructions for setting up, operating, and maintaining your Intelbras GX 3000 router. Please read it carefully before use.

2. Package Contents & Device Overview

2.1. Pakkens innhold

• Intelbras GX 3000 Wireless Mesh Router
• Strømadapter
• Nettverkskabel
• Hurtigstartveiledning (ikke inkludert i denne håndboken)

2.2. Enhet overview

Figur 1: Foran View of the GX 3000 Router

This image displays the front of the Intelbras GX 3000 router, showing its sleek white design and LED indicators for 5G, 4G, call status, Wi-Fi, and WPS button.

Figure 2: GX 3000 Router with Highlighted Indicators and Ports

This image provides a closer look at the router, emphasizing the LED indicators on the front (5G, 4G, Call, Wi-Fi, WPS) and the various ports located on the rear panel, including LAN, WAN, and TEL ports.

2.2.1. Porter på bakpanelet

Figure 3: Rear Panel of the GX 3000 Router

This image shows the rear panel of the router, clearly displaying the LAN, WAN, and TEL ports for wired connections.

• LAN-porter: For connecting wired devices such as computers, smart TVs, or gaming consoles.
• WAN -port: For connecting to an external modem or internet source (if not using 5G/4G).
• TEL-port: For voice services (if supported by your service provider).
• Strøminngang: Kobles til den medfølgende strømadapteren.

2.2.2. Bottom Panel Features

Figure 4: Bottom Panel Features of the GX 3000 Router

This diagram illustrates the bottom panel of the router, highlighting the TEST port, RESET button, and SIM CARD slot.

• TEST Port: For diagnostic purposes.
• Nullstillknapp: Used to restore factory default settings. Press and hold for 10 seconds while the device is powered on.
• SIM CARD Slot: Insert your 5G/4G SIM card here for mobile broadband connectivity.

3. Oppsett

3.1. Førstegangsplassering

Place the router in a central location within your desired coverage area, away from obstructions, metal objects, and other electronic devices that may cause interference. Ensure good ventilation around the device.

3.2. Sette inn SIM-kortet

1. Sørg for at ruteren er slått av.
2. Locate the SIM CARD slot on the bottom panel of the router (refer to Figure 4).
3. Insert your activated 5G/4G SIM card into the slot with the gold contacts facing down and the notched corner oriented correctly. Push until it clicks into place.
4. For å ta ut, skyv SIM-kortet forsiktig inn igjen til det spretter ut.

3.3. Koble til strøm

1. Connect one end of the power adapter to the Power Input port on the rear of the router.
2. Koble den andre enden av strømadapteren til en vanlig stikkontakt.
3. The router will power on automatically. Wait for the LED indicators to stabilize.

3.4. Kablede tilkoblinger (valgfritt)

If you wish to connect devices via Ethernet:

1. Connect one end of the provided network cable to a LAN port on the rear of the router.
2. Connect the other end of the network cable to the Ethernet port of your computer, smart TV, or other wired device.

3.5. Første Wi-Fi-tilkobling

The default Wi-Fi network name (SSID) and password are usually printed on a label on the bottom of the router. Follow these steps to connect:

1. On your wireless device (smartphone, laptop, tablet), open the Wi-Fi settings.
2. Scan for available networks and select the SSID corresponding to your GX 3000 router.
3. Enter the default Wi-Fi password when prompted.
4. Once connected, you can access the router's web interface to customize settings.

4. Bruksanvisning

4.1. LED-indikatorer

LED-lampene på frontpanelet gir statusinformasjon:

• 5G LED: Indikerer status for 5G-nettverket.
• 4G LED: Indikerer status for 4G-nettverket.
• Anrops-LED: Indicates voice service status.
• Wi-Fi LED: Indikerer Wi-Fi-nettverksaktivitet.
• WPS LED: Indikerer status for WPS-funksjonen.

Refer to the full user manual (if provided separately) for detailed LED behavior (e.g., solid, blinking, color) and their meanings.

4.2. Få tilgang til Web Administrasjonsgrensesnitt

To configure advanced settings, manage your network, or change Wi-Fi credentials, access the router's web grensesnitt:

1. Ensure your device is connected to the GX 3000's Wi-Fi network or via an Ethernet cable.
2. Åpne a web nettleser (f.eks. Chrome, Firefox, Edge).
3. I adressefeltet skriver du inn standard IP-adressen til ruteren (vanligvis 192.168.1.1 or 192.168.0.1) and press Enter. This information is usually on the label on the bottom of the router.
4. Skriv inn standard brukernavn og passord (finnes også på ruterens etikett).
5. You will now be in the router's management interface, where you can customize settings such as Wi-Fi name, password, security protocols, and more.

4.3. Wi-Fi-beskyttet oppsett (WPS)

WPS allows you to connect Wi-Fi devices without entering the password manually:

1. Press the WPS button on the front of the GX 3000 router (refer to Figure 1). The WPS LED will start blinking.
2. Within two minutes, press the WPS button on your client device (e.g., Wi-Fi adapter, printer).
3. Enhetene kobles til automatisk.

Note: WPS is a convenient feature but may be less secure than manual password entry.

4.4. Mesh Network Expansion

The GX 3000 supports mesh networking to expand Wi-Fi coverage. You can add other compatible Intelbras Qi5 line products to create a seamless mesh network. Each additional Wi-Fi 6 router can extend coverage by up to 300 m². It is recommended to use up to 6 routers in the same mesh network for optimal performance.

Refer to the specific instructions provided with additional mesh units for pairing and configuration.

5. Vedlikehold

5.1. Rengjøre enheten

• Ensure the router is powered off and unplugged before cleaning.
• Bruk en myk, tørr klut til å tørke av utsiden av enheten.
• Do not use liquid cleaners, aerosols, or solvents, as they may damage the casing eller interne komponenter.
• Hold ventilasjonsåpningene fri for støv og rusk.

5.2. Fastvareoppdateringer

Periodically check the Intelbras official webnettsted for fastvareoppdateringer. Fastvareoppdateringer kan forbedre ytelsen, legge til nye funksjoner og forbedre sikkerheten. Følg instruksjonene som følger med fastvareoppdateringspakken nøye.

5.3. Tilbakestilling til fabrikkinnstillinger

If you encounter persistent issues or forget your login credentials, you can reset the router to its factory default settings:

1. With the router powered on, locate the RESET button on the bottom panel (refer to Figure 4).
2. Using a paperclip or a similar pointed object, press and hold the RESET button for approximately 10 seconds.
3. Release the button. The router will restart with all settings restored to their original factory defaults.
4. You will need to reconfigure your Wi-Fi settings and any other custom configurations after a factory reset.

6. Feilsøking

7. Spesifikasjoner

8. Garanti og støtte

8.1. Garantiinformasjon

Intelbras products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Intelbras webnettstedet. Ta vare på kjøpsbeviset for garantikrav.

8.2. Teknisk støtte

If you require technical assistance or have questions not covered in this manual, please contact Intelbras customer support. You can find contact information (phone numbers, email, support portal) on the official Intelbras webnettsted:

Intelbras Official Webnettsted: www.intelbras.com.br

When contacting support, please have your product model (GX 3000) and serial number ready.